Availability
B&M's ShiftPlus electronic shift improvers use vacuums or electronics to improve the characteristics of your transmission, and let you change settings as you drive. Great for performance, towing, and RV use, these shift improvers recalibrate your transmission in one of two ways: Vacuum-style transmissions, such as a GM 4T60E, simply recalibrate the hydraulic system through the modulator circuit to provide firmer, more positive shifts; electronically controlled transmissions, such as a Ford AODE, recalibrate the transmission's hydraulic system electronically to give you a firmer, quicker shift, for better performance and longer transmission life. A flip of the switch allows the transmission to operate in the original factory mode at level 1 (firmer than factory) or level 2 (much firmer than factory). Either type installs in minutes with a few simple hand tools, without removing the pan.
( 11 )
$103.95
Tired of setting your points, or hitting that magical point at higher RPM where they seem to float, costing you power and performance? It's time to pull out those ancient contacts and benefit from modern day, digital technology with FAST XR-i Points-to-Electronic Ignition Conversion Kits. The XR-i is a compact module that bolts directly in place of the breaker point assembly. It simply triggers from the factory cam lobe, making installation a breeze with only two wires to connect. The microcontroller of the module manages the signal and dwell time in the coil to produce a much higher output spark that will improve the performance and drivability of your classic as well. Another great feature is a built-in adjustable rev limiter to protect your engine in the event of driveline failure or a missed shift. Features include: * Increased spark output for improved drivability * Pinpoint accurate timing * Better fuel mileage * Faster and more reliable engine starts * Digital and maintenance free * Fully sealed from moisture and dirt * Adjustable rev limiter can be set from 4,000 to 8,000 RPM
( 24 )
$86.95
—
$102.95
These PerTronix replacement electronic distributor conversion magnets will help you keep your ignition firing accurately. They are available for all engine types and are manufactured from quality materials.
( 8 )
$51.95
—
$103.95
On Sale
ACCEL points eliminator ignition conversion kits utilize specialized electronic circuitry and an infrared signal to stabilize ignition timing from 1 to 10,000 rpm and offer more accuracy. Put an end to your old-school high-maintenance system with the ACCEL points eliminator conversion kit designed for your application. More product features include: * Reduces maintenance by eliminating the need to change points * Improved performance and fuel efficiency * Latest thermal, clad-based surface-mount construction for maximum dependability * Easy to install with simple hand tools
( 50 )
$111.95
$89.95
OTC Tools offers the simplest method for eliminating the EFI system or idle air control as possible faults on no-start vehicles. Disconnect the fuel injectors, plug in a Noid Lite, and crank the engine. A flashing light indicates normal pulsing voltage. OTC Tools' expanded set of eight specific Noid Lites covers: GM PFI, Ford TBI, Geo TBI, Bosch PFI, GM TBI, GM SCPI, and now new applications of Bosch 2 and Multec 2, plus two GM IAC testers (flat and square four connector applications) with red and green LEDs. So, when checking a fuel injection system or an idle air control valve, trust OTC Tools test kits.
Not Yet Reviewed
$51.99
The Memphis Audio MXA1MCR is a wired remote controller that interfaces with your MXA1MC, MXAZ24MC and SMC3 head units. This unit features 25 ft. of cable, allowing you to easily run a remote to the back of your boat or side-by-side and control your audio from multiple locations. The controller is water and element-resistant and can be combined with an additional remote to control your audio system from two separate locations (Y cable required). Additional notes: * Controls volume, mute, track, source
Not Yet Reviewed
$69.95
On Sale
Convert your OEM-style breaker points and condenser to the more reliable Unilite ignition from Mallory. These self-contained units have no moving parts to wear out, so they provide many years of trouble-free service. Simply replace the points with the Unilite module, which consists of a photo coupler, signal processor, and power switch. Each time the shutter wheel stops the infrared light from reaching the photo coupler, the electronic circuitry energizes the ignition coil. When the shutter wheel allows the light to reach the photo coupler, the stored energy in the coil discharges. These kits can drive both OEM and high-performance ignition coils, and are designed for 12 V negative ground systems.
( 6 )
$176.95
$97.95
Ignition parts can wear out over time, so keep your PerTronix industrial distributor in top working order with these replacement modules. Made to the same high-quality standards as the originals, PerTronix replacement modules will give you plenty of trouble-free ignition service.
( 9 )
$106.05
FAST optical trigger installation kits are required in order to hook up the optical trigger conversion kits. They include the necessary shutters and brackets for installation.
( 1 )
$62.95
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 1000 )
$55.65
—
$67.90
On Sale
These AEM Electronics high-flow in-tank electric fuel pumps are designed for high performance, naturally aspirated, and forced induction EFI. They deliver reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps. The pumps include a rubber sleeve, end caps, a prefilter, hose, clamps, and flying lead.
( 50 )
$111.95
—
$162.95
$100.75
—
$105.95
On Sale
AEM Electronics high-output, insulated gate bipolar transistor (IGBT) inductive Smart Coils are designed for use on applications that do not have an external ignitor. The tradeoff between adequate spark energy and adequate spark duration ends with AEM's inductive Smart Coils, the first inductive coils that deliver CDI-like spark energy and voltage, and the long spark duration necessary for vehicles running high compression, high RPM, forced induction and/or nitrous engines. AEM's inductive Smart Coils each deliver over 100mJ of spark energy and a minimum of 40,000 Volts! That's as much as most CDI systems, without the need for a CDI module! They also provide very long spark duration at full energy, unlike CDI systems and multiple spark systems which fire off small spark events prior to and after their CDI burst to mimic longer spark duration. Smart Coil's feature a weather and shockproof design that can be mounted directly to the engine, and they cost less than other aftermarket LS coils. Upgrade your ignition on your forced induction, nitrous, or high RPM engine today with AEM Electronics IGBT inductive Smart Coils.
( 2 )
$87.15
$78.45
The Dakota Digital electronic antennas are designed to pick up AM/FM signals as well as external rods or aerial antennas. They are supplied with a 9 ft. cable and require only 3 in. of space for the mounting bracket.
( 17 )
$85.45
On Sale
AEM Electronics PSIG sensor kits feature high-quality sealed housings for maximum durability. They have an integral weatherproof connector for an easy plug-in installation. Kits are available for boost, exhaust gas temperature, nitrous oxide, brake pressure, inlet air temperature, or UEGO replacement gauges. PSIG sensor kits are offered in brass or stainless steel. Use brass sensors where you need a good reference to what pressure is being seen; e.g., reference/information of manifold pressure, not for ECU calibration. Stainless sensors should be used where you need exact details of the pressure; e.g., calibration/critical MAP sensor information for the ECU. Features include: * Stainless steel sensors are accurate to within 1-percent of full scale (pressure sensors) * Brass sensors accurate to within 3-percent of full scale (pressure sensors) * High-quality sealed sensor housings are virtually impervious to automotive fluids (360-degree welded wetted area) * Connector, pins, and pin lock included
( 18 )
$87.15
$78.45
On Sale
These AEM Electronics wideband UEGO sensors are used in AEM single channel UEGO systems. They may also work with other wideband UEGO controllers. Features include: * Much more accurate AFR readings than OEM sensors * Response time of less than 100 milliseconds * Measure from 11:1 AFR to atmospheric air * Latest Nernst cell/oxygen pump hybrid technology * Planar-configured zirconium dioxide sensor * Integrated heater element warms up in less than 20 seconds * PTFE insulators withstand temperatures of up to 1,400 degrees Fahrenheit (800 degrees Celsius) * Low current draw
( 22 )
$111.95
$100.75
On Sale
AEM Electronics fluid temperature sensor kits allow you to monitor the temperature of your water, oil, or coolant. Several styles are available and offer sensor, connector, and pins. Select the AEM fluid temperature sensor kit needed for your application. Features of kits available: 30-2011: * Temperature sensor, 3/8 in.-18 NPT, aluminum bung, waterproof connector, pins and wire seals * Operating temperature: -40 to 135 degrees C/-40 to 275 degrees F 30-2012: * Temperature sensor, 1/8 in. NPT, waterproof connector kit and pins * Operating temperature: -40 to 200 degrees C/-40 to 392 degrees F 30-2013: * Temperature sensor, 1/8 in. NPT, High performance DTM-style connector, aluminum bung, connector, and pins * Operating temperature: -20 to 150 degrees C/-4 to 302 degrees F
( 6 )
$70.79
$63.75
On Sale
AEM Electronics water/methanol injection nozzles are available in different jet sizes that allow you to select the appropriate jet for your power level. The nozzles are serviceable and can be disassembled for cleaning.
( 11 )
$93.69
—
$108.95
$84.35
—
$98.05
On Sale
AEM Electronics 4-Port AEMnet CAN Hubs eliminate the need to daisy-chain multiple AEMnet devices together using Y-cables. Now you can easily connect and power multiple AEMnet CAN devices from a central docking station! The four integrated 4-way DTM-style housings provide a reliable AEMnet CAN connection and are safe for engine bay mounting. AEM Electronics 4-Port AEMnet CAN Hubs include the following: * 4-Port AEMnet CAN Hub * Two 4-40 x 7/8 in. flat head screws * Two 4-40 x 0.375 in. washers * Two 4-40 x 9/64 in. Nylock nuts
( 1 )
$99.95
$89.95
Caspers Electronics wiring harness adapters allow the use of an LS2 throttle body on an LS1 vehicle. The harnesses feature premium OEM connectors, terminals, locks, and seals to facilitate complete plug-and-play installation and optimum performance. All wiring is high-temperature automotive spec and covered by stock-appearing split loom tubing.
( 10 )
$54.99
Caspers Electronics' new-design plug and play Hi-Lo fan controllers install easily on the PWM-controlled coolant fan found on C6 Corvettes. The factory coolant fan is powerful and incorporates a solid-state controller instead of relays (as in previous years and models). These Hi-Lo fan controllers interface with the factory controllers and permit manual coolant fan control. Caspers Electronics Hi-Lo fan controllers simply plug into the fan connector and include a round rocker switch that matches similar design control switches found in the console. Using this switch allows the vehicle operator to manually override the ECU control of the coolant fan to force-cool the engine, even when the car is unattended and not running. These control modules are designed to be plugged in between the sealed fan connector and its mate. These modules are completely sealed from moisture and contaminants and incorporate three sealed connectors. Caspers Electronics Hi-Lo fan controllers require a 20mm mounting hole to be drilled and have three switch positions--Low, which is half-speed fan control, Normal, which is controlled by the car's ECU, and High, which is maximum coolant fan speed. This gives the driver complete control over engine cooling. The switch can override fan control unattended, even with no key in the ignition.
( 11 )
$89.99
Caspers Electronics assortment kits of popular Weatherpack connectors are for use extensively in many late model cars and trucks. Packaged in a handy compartmentalized plastic box, each kit includes six each of the 1-, 2-, 3-, and 4-square connectors and five 4-flat connector sets with mates, along with a supply of 12-gauge and 16-gauge seals and male and female terminals. The terminals supplied are for 18- through 12-gauge wire. The kits also include the tool for removing Weatherpack terminals.
( 23 )
$67.99
On Sale
Keep track of temperature levels with AEM Electronics air inlet temperature sensor kits. They include an aluminum weld-in bung, connector plug, and flying lead and sensor to complete the installation. Monitoring engine functions can stop a problem early--pick up AEM Electronics air inlet temperature sensor kits for trouble-free performance.
( 8 )
$67.55
—
$70.79
$60.75
—
$63.75
Get reliable electrical connections with Caspers Electronics Metripack wiring connector assortment kits. They contain the popular Metripack connectors used extensively in many late model cars and trucks. Packaged in a handy compartmentalized plastic box, each kit includes four each of the 2, 3, 4, 6, 8, and 10 Metripack wire connectors, along with a supply of 12-gauge and 16-gauge seals, TPA locks, and male and female terminals. The terminals supplied are for 18- through 12-gauge wire. Kits also include removal tool for the Metripack terminals.
( 13 )
$79.99
On Sale
AEM Electronics high output inductive dumb ignition coils ain't so dumb! Designed to be used with an igniter, these AEM "dumb" coils offer CDI-like spark energy and voltage, plus the longer spark duration of inductive coils--and that's pretty smart! But that's not all. They easily install in the place of your existing coils, are shock and weather-proof, affordable, and they deliver world-class performance. That makes you smart for choosing them! If you want massive spark energy with an incredibly long spark duration, AEM high output inductive dumb ignition coils are an intelligent solution for any enthusiast running boost, nitrous, or high rpm.
( 2 )
$87.15
$78.45
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
