Availability
Replace your stock HEI module with Davis Unified Ignition Dyna-modules for a crisper, smoother running engine. They have more electronic dwell than your stock, so the coil saturates longer and produces a more intense spark. Dyna-modules are available in different pin quantities to meet your application, and mount easily on the side of your distributor housing with minimal wiring. Quicker starting, better throttle response, and more low-end power can be gained with Performance Distributors Dyna-modules.
( 122 )
$64.99
—
$89.99
Hypertech PowerStay modules instantly and safely disable your vehicle's auto start-stop and/or cylinder deactivation V4 mode. The modules are simple plug-ins that put an end to these modes on your vehicle, once and for all, so you can enjoy your vehicle as it should be.
( 7 )
$109.72
Want more info and not more gauges? Dakota Digital BIM temperature modules will allow you to display additional temperature readings without additional gauges! These units utilize ground isolated senders for an easy install, without the headache of engine grounding, and the modules will display either Fahrenheit or Celsius, depending on the setting selected by your gauge cluster. Getting more data is easier with Dakota Digital BIM temperature modules.
( 3 )
$90.25
Mallory Replacement Ignition Modules are designed to replace the malfunctioning module. They are direct replacements for the modules provided in Mallory distributors and conversion kits. With an easy three-wire hookup, these modules will have your vehicle's ignition working great in no time.
( 114 )
$92.95
—
$113.95
If your ignition module dies, you won't be going anywhere, and you have things to do and places to go. You can keep your distributor running smoothly with replacement ignition modules from Summit Racing™. These direct-replacement simple 3-wire hookups will have you out and about in no time. Make sure you're always ready with Summit Racing™ replacement ignition modules.
( 30 )
$78.99
—
$95.99
Don't take chances with an old or questionable ignition control module that can leave you stranded. Standard Motor Products replacement ignition control modules are designed to exceed OEM specifications for accurate, maintenance-free operation. Trust your vehicle's ignition needs to Standard Motor Performance.
( 38 )
$50.99
—
$99.99
Tune your rpm-activated MSD control to your application with one of these MSD rpm module kits. The kits include five modules in 200 rpm increments.
( 68 )
$59.75
—
$65.85
MSD retard modules are designed for use with MSD timing controls with retard features. They are available in several degree ranges to custom-tailor your ignition.
( 6 )
$59.25
—
$65.89
Summit Bucks
ACDelco GM Genuine Parts ignition control modules are GM recommended replacement components that undergo more stringent testing than aftermarket products. They increase the voltage in order for the spark plugs to ignite the air/fuel mixture. GM Genuine Parts ignition control modules feature electronically welded lead connections to help reduce heat stress, failure, or cold joints. They have been laser trimmed to provide precise values and reduce deterioration and damage. They include a copper slug heat sink to help dissipate heat and create a more stable environment. They also feature a large bus bar for added support and conductivity to address the installation and operating forces that stress terminal tabs. ACDelco GM Genuine Parts ignition control modules have been manufactured to provide the performance, durability and service life you would expect from General Motors.
( 5 )
$61.99
—
$101.99
With Delphi's knowledge of OEM protocol, their ignition control modules are engineered using superior materials to improve your vehicle's performance with the benefits of greater throttle response, smoother idle, and full power output at high rpm. Delphi ignition control modules are quality, direct fit OEM replacements available for a range of applications. For improved ignition performance, spark it up with Delphi!
( 15 )
$61.99
—
$104.99
MSD Circle Track ignition control modules will replace your stock 4-pin with the same powerful and reliable performance. These replacements are for use with MSD HEI distributors and will spark the energy to keep you going lap after lap. Make your Circle Track car's ignition "bulletproof" with control modules from MSD.
( 1 )
$86.99
Pertronix Flame-Thrower ignition modules for GM and Ford distributors are direct replacements for the OEM modules and provide enhanced high-rpm performance. Flame-Thrower modules are available for most GM car and truck applications using both remote and in-cap coils in 4-pin, 7-pin, and 8-pin configurations. A Ford Thick Film Ignition (TFI-IV) module is also available (distributor mount only). Thick film technology on alumina ceramic substrates removes heat for greater accuracy and improved reliability, while laser trimming gives precise peak current control for increased energy output. Each module is tested twice with automated equipment to ensure trouble-free operation.
( 41 )
$69.77
—
$96.00
On Sale
ACCEL ignition control modules are designed to fit most stock or modified distributors. ACCEL ignition control modules come with solid-state electronics for high-coil output and superior reliability. The dwell control circuit ensures long, consistent coil charging, and the current control circuit protects against coil overheating and resists false triggering from the RFI of high-output coils.
( 45 )
$99.95
—
$112.95
SQR Performance is setting a new standard in performance automotive parts with modern design and manufacturing processes that exceed expectations, and provide quality upgrade components you can count on. SQR Performance HEI ignition modules provide high coil output with solid state electronics for superior reliability. Designed to protect against overheating, they are compatible with most factory and aftermarket HEI distributors that use a 4-pin ignition module. SQR modules include a heat-dissipating compound for installation. Choose one for your project.
Not Yet Reviewed
$54.99
All 2018+ FCA (Stellantis) vehicles are built with a Security Gateway Module (SGW) that prevents access to the vehicle from the OBD2 port by anything other than the dealer diagnostic tools. Simply locate and unplug the SGW module, and plug the SGW Bypass block in its place. The OBD2 port will then have full access for use by aftermarket devices such as Z Automotive's Tazer or BurnBox, tuning tools, and code readers. These modules are required for use in 2018 and up Grand Cherokees and Durangos.
Not Yet Reviewed
$69.00
If your points eliminator module happens to burn out, or you're performing maintenance to your system, be sure to have the right parts for the job--ACCEL points eliminator replacement models. These modules are direct replacements for those in your ACCEL points eliminator kit.
( 15 )
$99.95
Keep your PerTronix Ignitor® or Ignitor II® conversion kit in top working condition with these replacement modules. There's no need to purchase a whole new PerTronix conversion kit; just replace the bad module and you'll be back on the road. Order the model designed for your specific vehicle application. Caution—these are not conversion kits; they are replacement modules only.
( 42 )
$95.10
—
$106.45
Tune your rpm-activated control to your application with one of these Davis Unified Ignition rpm module kits. These plug-and-play modules are offered in your choice of "even" or "odd" 200 rpm increments. Each kit includes five modules within a 1,000 rpm range to allow you to set a different rpm limit for the launch or over-rev. Order the module kit suited to your application needs.
( 1 )
$52.50
These Standard Motor automatic transmission modulators are designed to replace faulty factory units and help restore your factory shift points. They are available for a variety of applications.
Not Yet Reviewed
$52.99
—
$76.99
The XK Glow Tailgate Signal Modules eliminate error codes and ensure proper functionality of your fancy new truck tailgate light. Simply plug the module into the 4-pin trailer plug, then plug into the tailgate light, tap to power—and that's it! These tailgate signal modules are guaranteed to work on any truck with trailer detection, blind spot monitoring, factory LED taillights, and more! Additionally, this module will work with any third party light as well. Designed for trouble-free, consistent performance, XK Glow Tailgate Signal Modules are the end-all solution for your truck tailgate light!
Not Yet Reviewed
$89.99
Standard Motor fuel pump driver modules restore proper supply and regulation of voltage to the fuel pump and fuel pump relay. These direct-fit replacements ensure ease of installation; they undergo extensive testing and validation for proper performance and peak reliability. Programming is required after installation. Modules are available for a wide range of vehicles, including many Chevrolet, GMC, Hummer, Saturn, Cadillac, and Buick cars, trucks, and vans from the early 2000s and up.
Not Yet Reviewed
$73.99
—
$83.99
Cardone remanufactured brake control modules result from the most advanced processes. These value-packed units are 100 percent tested for consistent performance. Reverse engineering of examined failed cores allow OE weaknesses to be pinpointed and strengthened. The modules are completely disassembled and components are either renewed or replaced. Get exactly the part you need while saving some green with Cardone remanufactured brake control modules. Order the model designed for your vehicle application.
( 5 )
$106.99
—
$176.99
Your vehicle might come with nice LED accents, but what good are they if you can't show them off? Diode Dynamics Always On modules allow you to power your lighting more often—such as running a DRL at low power when it's dark, or keeping fog lights or parking lights on during the day. Keep your style day or night with Diode Dynamics Always On modules! Order the kit designed for your make and model.
Not Yet Reviewed
$59.95
—
$79.95
MSD adjustable low-rpm modules allow you to select any rpm between 1,000 and 3,000 by simply turning a knob. They're ideal for vehicles with automatic transmissions that are using the MSD 2-step module to leave the starting line below 3,000 rpm. They plug directly into the rpm module receptacle on the 2-step module selector, and can also be used on MSD's Soft Touch rev controls, rpm-activated switch, and shift light.
( 8 )
$52.69
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
