Availability
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 56 )
$109.99
Dorman intake manifolds are precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. They are thoroughly tested to ensure top-quality OEM construction and superior reliability. Dorman manifolds are offered in different styles, and all will provide a trustworthy design with a perfect fit and reliable construction for your vehicle.
( 157 )
$83.95
—
$104.99
Summit Bucks
ACDelco GM Genuine Parts intake manifolds evenly distribute the incoming air to each of the cylinders. They ensure the proper amount of air is mixed with the proper amount of fuel, and they are GM recommended replacements for your vehicle's original component. They are manufactured to fit your GM vehicle, providing you with the same performance, durability, and service life you expect from General Motors.
( 21 )
$70.99
—
$100.99
ATP replacement intake manifolds evenly distribute the incoming air to each of the cylinders. They ensure the proper amount of air is mixed with the proper amount of fuel, and they are ideal replacements for your vehicle's original component. They are manufactured to fit your vehicle, providing you with the same performance, durability, and service life you expect from the factory.
( 6 )
$96.99
Common symptoms of poor intake manifold gasket sealing may include leaks, rough idling, and stumbling. For your next engine build, use Mahle Original intake manifold gaskets to seal your engine up tight! It's a known fact—proper sealing is vital to create maximum horsepower within the engine, and these gaskets will allow you to achieve a good, positive seal. They utilize premium materials and are precisely designed to match OE quality, fit, form, and function. Order the intake manifold gasket designed for fitment on your particular vehicle by Mahle Original, one of the most trusted names in professional sealing solutions for engines and exhaust.
( 102 )
$53.99
—
$109.99
For the best fit and function, choose Mopar Replacement intake manifolds to replace old, cracked, and worn originals in your Chrysler, Dodge, or Jeep. Manufactured from quality materials, these Mopar parts offer an OE fit for an easier installation—and provide the right look, along with great performance, too! Select the Mopar part application designed for fitment on your vehicle.
( 17 )
$100.99
ARP's rugged, studs are rated at 170,000 psi. They're precision-machined for optimum thread engagement and have a wide-area flange for better load distribution. They also feature precision-rolled threads, which prevent galling while promoting more consistent torque loading. These studs include 12-point nuts and washers.
( 41 )
$64.99
ARP stainless steel intake manifold bolts are 15 percent stronger than Grade 8 steel bolts and have a wide-area flange for better load distribution. They also have precision-rolled threads, which prevent galling and promote more consistent torque loading. These bolts are both corrosion and heat-resistant and come highly polished. Bolts are available in both hex head and 12-point types, and washers are included.
( 260 )
$50.99
—
$79.99
On Sale
ICT Billet high-flow intake plenum plates are cut from heavy-duty aerospace-grade billet aluminum. Most are 1/2 in. thick and are machined on the back side for increased plenum flow. Choose ICT Billet high-flow intake plenum plates for your engine upgrade.
( 3 )
$99.99
$89.99
These Chevrolet Performance exhaust manifold gaskets will provide a leak-free seal when installing your exhaust manifolds. Chevrolet Performance exhaust manifold gaskets are made of high-grade materials to reduce the chance of a blowout under high exhaust temperatures or pressure. Choose these Chevrolet Performance exhaust manifold gaskets to get the job done right the first time.
( 8 )
$56.99
Summit Bucks
ACDelco GM Genuine Parts intake manifold gaskets include the necessary parts to seal your intake manifold to the cylinder head's intake ports. They help prevent the loss of fuel/air mixture from the intake manifold and help prevent dirt/debris from entering the engine and intake ports. These intake manifold gaskets are manufactured from a high grade rubber and are GM recommended replacements for your vehicle's original component. GM Genuine Parts intake manifold gaskets have been made to provide you with the performance, durability, and service life you have come to expect from General Motors.
( 31 )
$52.99
—
$106.99
Summit Bucks
Fel-Pro intake manifold gaskets are designed to be replacements for stock-type intake gaskets. This means they're ideal for stock rebuilds, as well as mild performance engines. The seals are available in a variety of configurations for fitment on hundreds of engine applications.
( 501 )
$50.99
—
$110.99
Chevrolet designed and built your engine to begin with, so why would you go to anyone else for important parts and pieces? When you're installing a new intake, or need to replace the intake gaskets, trust Chevrolet Performance. They have the right intake manifold gaskets to seal your engine up tight.
( 46 )
$50.55
—
$100.99
These Summit Racing™ exhaust gaskets are made from thick copper, and feature an embossed ridge around the exhaust port for a tight, leakproof seal. The copper gaskets help even out the flow between the head and header flange to minimize warping. Also, they'll conform to rough or irregular surfaces to maintain a positive seal, while keeping the header bolts tight.
( 209 )
$51.99
—
$52.99
Summit Bucks
Demanding conditions call for Fel-Pro PermaDryPlus intake manifold gaskets. Chemicals, vibration, and the harsh operating environments of your engine present a challenge to your intake gaskets. PermaDryPlus gaskets stand up to daring stress and solve troublesome sealing situations. Fel-Pro intake gaskets feature aluminized steel carriers, fluoroelastomeric coatings, and strategically placed sealing beads, locating tabs, and self-centering torque limiters. These features provide premium sealing results that are impervious to all types of coolants and oils. Order the replacement gasket set recommended for your vehicle and engine application.
( 80 )
$69.99
—
$119.99
Ford Performance Parts intake manifold gaskets are a great way to seal your new intake manifold. And why wouldn't they be? Available for a variety of Ford V8 engines, they're from the folks who designed and built your engine to start with. These high performance gaskets are a definite must for people who are serious about performance. Depending on the application, features may include: * Synthetic rubber Print-O-Seal (Fel-Pro) bead around ports for improved sealing * Improved port location that allows mild porting. * Non-stick coating, steel reinforced * Fitments for most single plane intake manifolds (check for port alignment and adequate sealing surface)
( 17 )
$67.99
On Sale
Use Holley intake manifold gaskets for the reliable sealing of your manifold. They are made using popular materials and construction styles, such as composition and Kormetal, for many popular engines.
( 7 )
$57.29
Instant Rebate
Vibrant Performance vacuum manifolds allow for consistent vacuum from a single source than can be distributed to several (up to six) outlet ports up to support vacuum related accessories, such as boost gauges, boost controllers, blow-off valves, fuel pressure regulators, and more. They are machined from T-6061 billet aluminum and are available in a silver or black anodized finish. The manifolds include five pipe plugs, just in case you need to fill any of the unused outlets.
( 9 )
$56.04
Trick Flow® StreetBurner® and Track Heat® intake manifold hardware kits include all of the hardware originally packaged with a Trick Flow® manifold. Kits include: * Four 5/16-24 in. nuts * Four 5/16-24 in. x 1 3/4 in. studs * Three 3/8 in. NPT pipe plugs * Two 1/4 in. NPT x 1/4 in. hose barb fittings * Two 1/4 in. vacuum caps * Two 5/16-18 in. x 6 in. bolts * One 1/4 in. NPT x 3/8 in. hose barb fitting * One 3/8 in. vacuum cap * One 1/4 in. heater hose spacer * One 7 in. fuel line protective sleeve
( 2 )
$50.99
On Sale
MSD AirForce Manifold LS seal port kits offer the perfect fit and performance. Whether you've misplaced or accidentally damaged your originals, these MSD premium rubber seals will get you back on track to making power!
( 5 )
$85.99
$77.35
King Shocks charging manifolds allow you to adjust your air or nitrogen shocks to just the right pressure. These invaluable tools are used by shock techs and racers around the world, allowing drivers to tune their shocks on the trail, at the track, or in the garage. King Shocks charging manifolds are made from billet aluminum and feature an anodized finish, and include an accurate pressure gauge for precise readings. Fine tune your shocks on-the-fly where ever you may be with these King Shocks charging manifolds.
( 1 )
$90.25
Holley intake manifold studs are made of high-quality steel construction for long-lasting durability and performance. They are designed to be used with Holly Hi-Ram style intake systems to give them peak performance. If you have a new Hi-Ram system you're throwing in your ride, make sure you don't forget to grab a set of these Holley intake manifold studs.
( 1 )
$75.05
—
$88.39
AFR intake manifold gaskets are manufactured from high-quality composition gasket material. They provide excellent sealing and durability and can be trimmed if needed for modified ports. AFR intake manifold gaskets are ideal for OEM replacement, as well as high performance street, drag race, and oval track applications.
( 72 )
$56.70
On Sale
Typical aftermarket exhaust manifold bolts are much shorter than stock which after numerous heat cycles can cause them to fatigue and start to stretch, leading to exhaust leaks and possible breakage after repeated re-torques. The finish and coating on most of these bolts can also lead to premature corrosion and zinc embrittlement. Replace damaged or corroded exhaust manifold bolts with BD Diesel class 10.9 bolts and spacers which improve thermal durability to stand up to the heat and non-Zinc plated fasteners prevent zinc embrittlement. Order the kit recommended for your vehicle and engine application. BD Diesel exhaust manifold bolt and spacer kit #1041483 details: * Exhaust spacers ensure fastener operates in elastic stretch without fracture or permanent yield * Class 10.9 hardware * Non-zinc plated fasteners prevent zinc embrittlement * Includes 16 exhaust spacers (18mm) * Includes 16 flange head exhaust bolts (M8x1.25 – 40mm 10.9)
Not Yet Reviewed
$63.95
—
$95.95
$57.56
—
$86.36
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
