Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
68 Results Found For "Builders"
Showing In Stock Items. Show All 90 Items.
Mahle Original Premium Piston Ring Sets
Mahle Original piston ring sets are designed to be installer-friendly. They are pre-lapped to seat immediately, virtually eliminating break-in time. Ring materials and coatings, as well as ring tension, are all optimized for reduced friction and extended life in each application. The compression rings feature a barrel-faced contact area for more efficient compression and CNC-controlled gap chamfer to optimize compression and reduce blow-by. Intermediate rings have a reverse twist design for better groove side sealing, and taper race machining to enhance contact. The CP-20 oil ring assemblies feature a 20 degree ear angle, an exclusive feature that provides the best possible side seal against the cylinder wall, and a special chemical polish on the oil ring expander offers enhanced oil drain back. Mahle Original piston ring sets provide unmatched quality and ease of installation, making them the rings of choice for today's engine builders.
( 56 )
$51.99
—
$99.99
Fel-Pro Performance Rear Main Bearing Seals
Fel-Pro Performance main bearing seals are made of high-grade materials, such as silicone, polyacrylate, or fluoroelastomer. Race engine builders prefer these premium seals for their severe-duty needs.
( 195 )
$53.99
PennGrade 1 Synthetic Blend High Performance Motor Oil
Whether from the everyday demands of the road, racing or just hard driving, without the right protection, your car will lack efficiency, wear down faster and underperform. PennGrade 1 "The Original Green Oil" has been endorsed for decades by racers, engine builders, and manufacturers. Their Synthetic Blend High Performance motor oil offers tenacious cling-ability and enhanced levels of zinc and phosphorous chemistry to give your hard-working engine the protection it demands. Choose the viscosity needed for your engine. Features and benefits: * Film strength/protection under demanding torque * Anti-foaming, stability, and high-temperature protection * Detergent/dispersant additives for engine cleanliness
( 175 )
$97.09
Summit Racing Equipment® EZ Pushrod Length Checkers
Summit Racing Equipment's® patented EZ pushrod length checkers make finding correct pushrod length a snap ... literally! Simply loosen the set screw, tighten the rocker, tighten the set screw, and remove the rocker. The pushrod is then at zero lash. Measure with a dial caliper and add the amount of required lifter plunger preload to get the perfect pushrod length. You'll attain accurate, consistent measurements--and no more counting rocker bolt turns! These stainless steel tools are a must for short travel lifters, and a Master Kit is available for professional engine builders. Order the lengths needed for your applications.
( 11 )
$99.99
ARP High Performance Series Main Bolts
ARP High Performance Series main bolts are rated at 180,000 psi and a popular premium replacement for OEM fasteners. Designed to meet the exacting standards and demands of professional engine builders, ARP bolts are forged from 8740 chromoly steel and feature a reduced wrenching head, large underhead radius, and rolled threads for the utmost in reliability. The threads are rolled after heat-treating which gives them about 2,000 percent better fatigue strength than most main bolts that are threaded prior to heat-treating. Hardened parallel-ground washers are included with each kit.
( 179 )
$50.99
—
$87.99
Moroso Pro Degree Wheels
These Moroso Pro degree wheels are designed for the professional engine builder. They accurately measure camshaft centerline, valve timing, TDC, and BDC. Made from heavy-gauge metal with a silkscreen finish for long-lasting use, they include an adapter to fit virtually any engine.
( 40 )
$84.95
Summit Racing™ Steel Rocker Arms
Summit Racing™ steel rocker arms are horsepower builders! These rocker arms can give you that extra lift you've been looking for. They're made from a higher quality, heat-treated steel, and have a longer slot to avoid stud interference. We even include anti-gall grooved pivot balls and locking nuts. You're getting one heck of a deal on horsepower.
( 109 )
$50.99
—
$99.99
Summit Racing™ Valve Covers
No high price tags, just top-notch quality for the budget conscious builder. This huge selection of Summit Racing™ valve covers feature durable, thick steel construction and are offered in many options to help you find exactly what you want to make your vehicle's engine bay stand out. Available styles include low-profile, stock, or tall heights; center bolt or perimeter bolt mounting; several different finishes, including chrome; plain or with designs or logos, including our Summit™ logo. Choose the fit and finish you prefer.
( 333 )
$50.99
—
$63.99
Classic Performance OE Drum Brake Hub Kits
Classic Performance OE drum brake hub kits include all the necessities for a revamp on your brake system. Only the best materials are used—to endure all the street and strip driving you experience. These kits are ideal for builders and Chevy or Buick enthusiasts looking to complete any restoration. They're available for hundreds of applications from the 1960s and '70s. Select the model recommended for your vehicle.
( 22 )
$98.99
Howards Cams Seal Cutters
These seal cutters from Howards Cams allow the engine builder to modify your cylinder heads to fit the desired springs and valve stem seals to suit your application. A choice of sizes is available.
( 41 )
$86.99
—
$92.99
On Sale
Hooker Band Clamps
Perfect for custom builders and repairs, Hooker band clamps provide solid, leak-free connections. These versatile clamps are made from high-grade stainless steel and offer ease of use, while creating a tight seal that avoids exhaust leaks. They are designed for slip-fit exhausts and are available in two diameter sizes. Hooker band clamps bring quality materials, design, and performance to your exhaust project.
( 42 )
$57.49
—
$62.09
$51.74
—
$55.88
Redhorse Performance 1000 Series Swivel Seal Hose Ends
Redhorse Performance 1000 Series swivel seal hose ends are meticulously engineered. RHP starts with detailed CAD drawings and then cuts each component from 6061 T6 aluminum on their CNC machine turning centers—providing superior thread strength and smooth assembly. Available in different AN fitting sizes and finishes, select the 1000 Series swivel seal hose ends designed for your application needs. Additional product features: * Available in straight, 30 degree, 45 degree, 60 degree, 90 degree, 120 degree, 150 degree, and 180 degree angle * Engineered for use with RHP's 200, 205, 230, and 235 series hoses (sold separately) * For high performance race applications, Redhorse recommends using the 205 and 235 series e85 compatible hoses (sold separately) * Custom designed hose nipples enable a quick, easy, and consistent hose end assembly and our double swivel seal design makes for easy re-clocking * Double Viton® O-ring seals provide leak-free performance when used with a wide range of racing fuels and fluids * Color consistent anodizing and unique pressure testing adds the final touch of quality and protection that professional engine builders have come to expect from Redhorse Performance AN hose ends * Can be easily assembled with the help of RHP's custom made tools (sold separately)
( 11 )
$51.27
—
$71.74
On Sale
Mr. Gasket HEADLOCK Locking Header Bolts
Burning your hands on headers or the exhaust manifold when bolting them on just became a thing of the past. Mr. Gasket HEADLOCK locking header bolts simplify header installation with high-strength, 2-in-1 self-locking bolts that eliminate the need for lock washers. Designed for the performance engine builder, these innovative, patent-pending fasteners have 24 equally spaced serrations in the face of the hex head. The bolts grab and lock on to your manifold surface, virtually eliminating the chance that one might back out from vibration or because of the varying expansion rates of different metals. Mr. Gasket HEADLOCK locking header bolts are available for numerous domestic applications, including Chevrolet, Chrysler, Ford, AMC, Oldsmobile, and Pontiac. They're manufactured from stainless steel, designed to withstand tensile strengths of 150,000 pounds per square inch, and come with a bright polished finish.
( 47 )
$60.25
ARP Pro Series Main Bolts
ARP Pro Series main bolts are application-specific and rated at 190,000 psi. Designed for use in competition engines, as well as to meet the exacting standards and demands of professional engine builders, ARP bolts are forged from 8740 chromoly steel and feature a reduced wrenching head, large underhead radius, and rolled threads for the utmost in reliability. The threads are rolled after heat-treating which gives them about 2,000 percent better fatigue strength than most main bolts that are threaded prior to heat-treating. Hardened parallel-ground washers are included with each kit.
( 15 )
$59.99
—
$74.99
On Sale
Mr. Gasket MLS Head Gaskets
Mr. Gasket MLS (multi-layered steel) head gaskets are ideal for all engines. Each gasket is made with high-grade materials and manufactured with the latest cutting-edge technology for the tight tolerances that quality engine builders rely on. These MLS gaskets consist of high-grade layers of stainless steel that are tempered to relax stress for proper torque retention. Plus, each multi-layered sheet is layered with a premium polymer coating that's resistant to oxidation and chemicals. Choose Mr. Gasket MLS head gaskets for any engine and any combination.
( 1 )
$125.05
$70.55
Summit Racing™ Pro Ring Filers
Summit Racing™ Pro piston ring filers are designed for professional use and engine builders looking for accurate and affordable equipment. With a powerful 110 V or 220 V motor, the machines make quick work of even the toughest steel rings. The precision table action allows a full sweep across the griding wheel face for even wear and no unexpected highs or lows. This enables you to hit your target .001 in. clearance with a minimum of back and forth between the cylinder bore and reduce the chance for mistakes. Each Pro filer also includes a deburr wheel. The machines come in a wide variety of colors, including premium 2-stage candy finishes to match your shop equipment. They are designed and built in the USA with American-made materials.
( 23 )
$56.99
Fluidampr Holding Tools
Fluidampr holding tools are an essential addition in the toolbox of any engine builder or technician. Designed specifically for use in automotive shop environments, these durable tools ensure optimal performance and reliability when working with harmonic dampers. With a robust construction, the Fluidampr holding tools provide the stability and support needed for precision work on a variety of engine components. Whether you're performing maintenance or building high-performance engines, the Fluidampr damper holding tool simplifies the process by securely holding dampers in place, allowing for accurate adjustments and installations. Key Features: * Durable construction—tool is CNC-machined from quality quarter-inch steel, then finished in black zinc chromate for corrosion resistance and laser engraved with the Fluidampr logo * Precision support—tool secures dampers for accurate adjustments and installations * Essential tool for engine builders and automotive technicians * Can also be used as a barring tool to rotate the crankshaft with the damper installed * Fluidampr Holding Tool fastens into the accessory drive pulley mounting bolts and accepts a 1/2 in. breaker bar or ratchet * Compatible with most domestic pulley bolt patterns, including Chevy/GM 3.20 in. bolt circle, Ford 3.30 in. and 2.80 in. bolt circles, and Chrysler 2.80 in. bolt circles * Holding tool also works with popular Toyota 2JZ, Nissan RB, Subaru EJ and FA20, Honda B and K Series, and Mazda MZR engines
( 1 )
$57.12
Mr. Gasket Engine Cleaning Brush Kits
Everyone from serious engine builders to backyard mechanics knows that for proper lubrication and long life, it's necessary to clean all of the holes and passages found in today's engines. These engine brush kits from Mr. Gasket feature stiff nylon bristles that won't soften or melt when used with cleaning solvents. To minimize bending, each handle is made from heavy-gauge twisted steel wire and has a loop on the end for easy hanging and storage.
( 19 )
$76.05
ARP Tapered Ring Compressors
ARP tapered piston ring compressors are CNC-machined from 6061-T6 billet aluminum tube material and feature a true radius for each individual bore diameter. They're also relieved to accommodate wire O-rings on the bottom. Type 3 anodizing is used for long life, and each bore size is prominently engraved in 3/4 in. high numbers for easy identification. The true-radius design of ARP tapered ring compressors is far superior to conventional tapered devices, and they're widely acclaimed by professional engine builders. Dozens of sizes are available for both standard and metric applications.
( 140 )
$57.99
—
$69.99
AutoMeter Designer Black Analog Gauges
AutoMeter Designer black analog gauges take rodders back to the original look of high-performance instrumentation. The classic black dial faces with bold numbering, clear domed lenses, and chrome bezels make these gauges the choice of top show-car builders. Choose from among a half-dozen gauge types, as well as other options for your dash setup.
( 77 )
$58.99
—
$91.99
Mr. Gasket Deluxe Engine Cleaning Brush Kits
Serious engine builders and backyard mechanics alike need these special length brushes from Mr. Gasket to properly clean all of the holes and passages found in most automotive engines. Available in a wide variety of diameters and lengths, each brush is made from pure stiff-bristle nylon that won't soften or melt when used in conjunction with most engine-cleaning solvents. To minimize bending, each handle is made from heavy-gauge twisted steel wire, which also firmly holds the bristles in a spiral twist. A convenient loop on the end of each brush makes for easy hanging and storage.
( 8 )
$54.09
Total Seal Non-Adjustable Ring Compressors
Total Seal's non-adjustable ring compressors are precision-machined from heat-treated aluminum and then hard-anodized for years of use. Designed for the builder who does a lot of repeat bore sizes, they come available in 3.530 in. to 4.625 in. bore sizes.
( 49 )
$51.35
—
$60.66
J.W. Performance How to Build a Powerglide
J.W. Performance "How to build a Powerglide" books are perfect for the novice or experienced builder. With over 170 pages of detailed explanations and pictures, these books are sure to help you out.
( 1 )
$53.66
Tilton 74-Series Master Cylinders
Tilton 74-Series master cylinders have been continuously improved upon since their introduction way back in 1986. These aluminum brake cylinders are a trusted favorite of car builders and race teams, due to their reliability and value. The units are compatible with front, rear, disc, or drum brakes. Order the bore size needed for your application.
( 4 )
$73.95
