Availability
Showing In Stock Items. Show All 185 Items.
Ford Performance Parts valve pushrod guideplates are designed to support your pushrods in order to keep your rocker arms centered on the valves. These guideplates are available in both flat and raised styles. The raised-style guideplates support the pushrods closer to the rocker arms, stabilizing the pushrods.
( 2 )
$75.99
Cometic Street Pro bottom-end gasket sets gather all of the necessary parts in one handy kit, tailored to specific years/makes/models. Rebuilding or servicing an engine can be quite an ordeal--trying to locate all of the correct gaskets, seals, washers, and O-rings for the many sections. If the fit isn't perfect, you know the messy results.There's no need for you to hunt down replacement seals for oil pans, water pumps, pickup tubes, cranks, drains, timing covers, retainers... you get the picture. Match up your vehicle with the corresponding Cometic Street Pro bottom-end gasket set and order today!
( 2 )
$69.57
—
$75.78
Flatout offers a comprehensive line of performance gaskets, including header gaskets, which are engineered from top-grade materials to take on high-heat produced by your exhaust headers. Their high thermal conductivity pulls heat away from the heat source and allows them to expand and contract without damage. Flatout header gaskets feature smooth contours, accurate hole locations, and tight tolerances to provide an exceptional fit and seal. Get the most performance out of your engine, use Flatout header gaskets--they seal where others don't!
( 10 )
$50.99
Fine Lines fuel lines are pre-bent and flared with the correct threaded fittings which reduces your install time tremendously. Their tank to engine fuel lines run from the back of the vehicle to the front, and will either connect to the fuel pump at the motor or run directly to a fuel rail. The mild steel lines are Galphan coated for added protection, while their stainless steel lines are T304, but are of a special softer blend to help with any possible leaks. Fine Lines carries a wide variety of compatible lines (main, return, vapor lines, etc.) for different years, makes, and models, including classic cars. Choose the lines designed for your vehicle.
( 14 )
$57.36
—
$102.33
Lokar's flexible and machined engine dipsticks are designed to coordinate with their flexible transmission dipsticks. The slim design allows for an easy installation inside of your headers to work with OEM and Sanderson cast exhaust manifolds. They have clearance for block-hugger headers or can be applied straight into the engine block (without tube), depending on your application. All engine dipsticks feature an E-Z read aluminum or steel stick for an accurate measurement of engine oil.
( 349 )
$102.95
Lokar Midnight Series flexible engine dipsticks are designed to coordinate with Midnight Series flexible transmission dipsticks. Their slim design allows for the easy installation inside of headers to work with OEM and Sanderson cast exhaust manifolds. They have clearance for block-hugger headers or can be applied straight into the engine block (without a tube), depending on your application needs. All engine dipsticks feature an E-Z read aluminum or steel stick for an accurate measurement of engine oil. Order the model recommended for your vehicle year/make and engine family.
( 108 )
$113.95
Brighten and freshen up your engine compartment with a Scott Drake oil cap. These Scott Drake oil caps not only look sharp, but they will also keep oil in its place.
( 92 )
$51.36
—
$57.09
If you've lost your cap, prevent oil leaks with Motorcraft oil filler caps specifically made to fit your Ford vehicle. They are made of high-material, work perfectly, and look just like the OE components. They are the perfect replacements for your vehicle, resisting corrosion and abrasion to ensure long-lasting durability.
( 4 )
$61.99
Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
( 251 )
$95.99
—
$97.99
These Milodon stainless steel oil dipsticks are CNC-machined from billet stainless steel to stay bright and rust-free. All dipsticks feature an O-ring seal top and bottom to positively seal against water & dirt. The braided stainless steel hose will flex around headers, tube mounts, and anything else in the way.
( 176 )
$86.95
PRW rocker arm adjuster screws are designed to thread into your rocker arm. They are made of hardened steel and feature a black oxide finish for maximum durability. The screws can be adjusted to the pushrod by using the internal Allen head and the 12-point locknut.
( 7 )
$74.27
High-rpm can cause fluctuation in your valvetrain, leading to damaged parts. Add strength and stability in your valvetrain with PRW rocker arm pedestals and stands.
Not Yet Reviewed
$88.01
Summit Bucks
When you're looking to replace leaking or worn-out engine seals, Fel-Pro head gasket sets have you covered. Ideal for your stock rebuilds or street-driven cars and trucks, Fel-Pro gaskets will have you back on the road in no time. They're available in hundreds of configurations for fitment on countless vehicles and engine types. Order the set designed for your car, truck, van, or SUV. (These gaskets are not intended for race applications.)
( 371 )
$103.99
Sealed Power stock replacement oil pumps meet or exceed OE standards for oil delivery volume and pressure. With cast iron bodies and precision machining, they can be relied upon for adequate lubrication in both stock and mild performance rebuilds. Features include: * Direct replacement * Manufactured to strict engineering quality standards * No special tools required * Constructed of high-quality materials for durability
( 35 )
$50.99
—
$71.99
Oil volume is nothing to take lightly, so why reuse an old oil pump or settle for something less than great, when you can have a Sealed Power pump? They've been making quality, reliable performance pumps for decades. These high-volume oil pumps have increased rotor or gear section lengths for increased oil delivery to critical areas under extreme conditions. Their sturdy cast-iron pump body handles the stress associated with high rpm and added oil volume. The extra volume is helpful in maintaining oil pressure in rebuilds.
( 57 )
$94.99
—
$104.99
Now you can easily move your vehicle's oil filter to a more convenient location for quicker and easier filter changes with one of these Derale Performance engine oil filter relocation kits. They work great for engine swaps, too! The kits are available for hundreds of vehicles; order the model recommended for your application.
( 38 )
$80.28
—
$112.40
Melling Mell-Lube engine assembly and break-in fluid contains a special additive that plates wear surfaces to prevent scoring or galling during engine startup. Mell-Lube also contains corrosion inhibitors to prevent rust and pitting to new engines.
( 7 )
$78.99
These Summit Racing™ remote oil filter kits include a bypass adapter, filter mount, 8 ft. of oil hose, barb fittings, stainless steel hose clamps, mounting hardware, and instructions. These kits require a Fram PH8A or equivalent oil filter, which is not included.
( 188 )
$60.99
—
$74.99
Do you need to replace that beat-up air cleaner? Scott Drake offers original-style air cleaners that will clean up the ugliest of engine compartments. Scott Drake manufactures these air cleaners using quality materials, ensuring years of performance.
( 131 )
$70.15
—
$74.59
With their built-in oil and coolant seals, patented SCE Titan copper self-sealing head gaskets require no additional sealants. That means you get user-friendly installation, combined with reliable fluid sealing, plus the unbeatable strength of solid copper gaskets. The fluid seals are bonded to both sides of the gaskets and cleverly offset to allow the annealed copper of the gaskets to deform around them for a better seal, especially in the O-ring combustion-seal area. Recommended for liquid-cooled racing engines with O-rings in the heads or block, these one-of-a-kind copper head gaskets can even be used on street machines with no worries about coolant leaks! For perfect sealing strength every time, introduce your engine to SCE Titan copper head gaskets.
( 6 )
$107.50
—
$125.42
Mahle Original piston ring sets are designed to be installer-friendly. They are pre-lapped to seat immediately, virtually eliminating break-in time. Ring materials and coatings, as well as ring tension, are all optimized for reduced friction and extended life in each application. The compression rings feature a barrel-faced contact area for more efficient compression and CNC-controlled gap chamfer to optimize compression and reduce blow-by. Intermediate rings have a reverse twist design for better groove side sealing, and taper race machining to enhance contact. The CP-20 oil ring assemblies feature a 20 degree ear angle, an exclusive feature that provides the best possible side seal against the cylinder wall, and a special chemical polish on the oil ring expander offers enhanced oil drain back. Mahle Original piston ring sets provide unmatched quality and ease of installation, making them the rings of choice for today's engine builders.
( 53 )
$76.99
—
$106.99
Today's engines operate under very demanding conditions. When these Sealed Power main bearing sets are used in performance applications, all components are pushed to their limits—and many must be changed to meet these special demands. Federal Mogul, a longtime supplier to both OEM and the aftermarket, has responded to this challenge with its tri-metal, copper-lead, high performance main bearing sets. They're tested in the lab and proven on the track. The bearings are available for various crankshaft undersizes, for direct replacement or performance usage on a wide range of specific applications.
( 98 )
$67.99
—
$115.99
Ford Performance Parts high-volume oil pumps are high-quality, pressure-tested, and hand-turned to deliver more oil than stock pumps. They are offered for most popular Ford V8s. Additional information: * Most are high-volume with standard pressure * Also available for select applications requiring higher volume and pressure * May require bolt-on style pickup (not included) * Some are not recommended for use with stock-capacity oil pans due to their higher pumping capacity * Because of their larger size, some pumps will not fit stock rear sump oil pans * Where applicable, includes a steel backing plate to reduce internal leakage and cavitation erosion
( 45 )
$80.99
—
$90.99
ATP timing covers are a crucial part of any engine. They allow for the proper lubrication of the timing chain and protect it from damage. Timing covers can become damaged from over-tightening or corrosion, causing engine oil leaks—and resulting in significant engine damage. ATP timing covers function and fit just like the original parts, ensuring long life and durability. Order the model recommended for your vehicle and engine application.
( 32 )
$105.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
