Availability
Showing In Stock Items. Show All 54 Items.
Energy Suspension offers motor and transmission mount kits for hundreds of vehicle, engine, and drivetrain applications. These replacements are the best of both worlds—smooth running for the street, and strong enough for the track. They're torque- and vibration-resistant, yet comparable in strength to solid metal mounts. The steel brackets are available in zinc and chrome finishes; while the polyurethane bushings deliver far more durability than stock rubber bushing which crack and deteriorate under the intense heat. Better mounts equal better performance. Order the kit recommended for your ride.
( 217 )
$51.14
—
$98.94
Hooker Super Competition engine swap transmission mount kits are available for Chevy, Chrysler, and Ford small block and big block engines. These strong mounts are designed from steel and are engineered to provide you with an exact fit and a simple installation. Hooker Super Competition engine swap mount kits are the mounts of choice when matched with the appropriate engine swap.
( 10 )
$54.79
—
$81.25
Prothane transmission mounts take the sloppiness out of your original rubber-mounted drivetrain. They're designed to control torque, eliminate breakage, and retain their shape. These mounts incorporate a metal run-safe interlock feature, increasing strength and durability of each unit. Don't take unnecessary chances with your vehicle's drivetrain; install Prothane transmission mounts, available in a variety of styles for fitment on specific vehicle applications.
( 168 )
$65.23
—
$110.99
Prothane offers a wide variety of motor mount styles. In all cases, their mounts are designed to limit the travel, reduce the chances of breakage, and put the power to the wheels. All of the motor mount kits feature application-specific engineering. In other words, they're not universal in fit, and they provide you with the performance you demand. If applicable, the mounts feature a polylocked "run-safe" feature, just in case you play way too hard, so you can still get back home.
( 221 )
$53.17
—
$110.28
Eliminate the knocking caused by faulty factory bushings--with a Crown Automotive motor mount kit. Their build quality is as good as or better than the units they're replacing. These kits include steel brackets and firm rubber/steel bushings which are flexible enough to absorb engine or driveline vibrations. Replace your weak, broken, or oil-soaked transmission and engine mounts with an inclusive kit from Crown, available in application-specific packages..
( 9 )
$64.99
—
$100.99
Derale standard automatic transmission filter kits are engineered to work in conjunction with the OEM transmission filter. These systems prevent any foreign particles from entering the valve body or other internal components, while maintaining the fluid and removing any varnish, sludge, or contaminants. Derale Performance standard kits include: * Aluminum filter mount * Derale spin-on transmission filter * OEM-spec oil hose * Brass fittings * Stainless steel hose clamps * All necessary hardware
( 31 )
$84.47
Trans-Dapt Performance frame rail adapter kits acclimate your non-200R4 frame rail extension car for proper installation of transmission and LS engine. These kits alter the crossmember attachment holes on GM A/G-body cars that do not have a THM200R4 frame rail extension on the driver (left) side, allowing you to fasten Trans-Dapt's crossmember to the frame, and in turn have the capability to install a T56, TH400, 4L60, 65, 70, or 4L80E transmission with an LS engine. These adapter brackets are formed from steel and painted black.
( 1 )
$52.99
These FAST EZ-EFI throttle cable mount kits are made for the specific needs of the FAST 4150 throttle body found in the FAST EZ-EFI systems. They are designed to work with and allow adjustability for automatic TV cables, and are specifically marked for the unique TV cable setup on GM 700R4 transmissions. The kits are built to be more stable and accurate than others on the market. They feature a proper tension double-spring to ensure accurate throttle closing and maximize the performance of the FAST EZ-EFI. The adjustability of the linkage is engineered to ensure proper wide-open throttle actuation. The FAST EZ-EFI throttle cable mount kits include all necessary mounting hardware to install and adjust, as well as a comprehensive selection of cable mounting brackets to cover all major cables, applications, and brands.
( 97 )
$82.95
OMIX-ADA has everything that you need for a successful Jeep restoration or repair. Including these high-quality engine mounts. They are available for a wide variety of Jeep applications.
( 9 )
$109.99
Derale fluid cooler installation kits are designed for mounting a transmission or engine oil cooler. They include mounting brackets, hardware, rubber line, and fittings to complete the simple install. The Derale Performance fluid cooler installation kits are available with your choice of 3/8 in. or 1/2 in. rubber line, so we are sure to have one for your specific application.
( 1 )
$73.30
Max Torque Box Stock/Clone clutches was designed for the Clone engine market. They are very similar to the SS-Series clutch but are able to withstand the rigorous requirements of the Clone racing engine. They are offered in different chain sizes and sprocket tooth counts. Choose the proper Max Torque Box Stock/Clone clutch for your Kart.
Not Yet Reviewed
$79.99
—
$87.99
Summit Racing offers engine swap motor mounts for a variety of applications, from the 1980s and up. The complete mounts include steel brackets with a black powdercoat finish and bolt-in hardware required for installation. Secure your engine properly; order the set of mounts recommended for your project.
( 7 )
$112.99
On Sale
Hooker Blackheart transmission adapter plates are one of the most comprehensive engine swap components available. The adapter plates bolt directly to the OEM transmission mount location with the supplied hardware, and helps to eliminate the daunting task of figuring out correct drive line inclination and U-Joint operation angles. These transmission adapter plates are engineered to work together with Hooker Blackheart transmission crossmembers, engine mounting brackets, long tube headers, and exhaust systems (all sold separately) to provide an easy trouble-free Gen III Hemi engine swap in the B-Body Mopar Platform. Blackheart transmission adapter plate features: * Heavy-duty steel construction * Black powdercoated finish for lasting performance and good looks * Compact design allows better clearance then OEM crossmember * Easy bolt-on installation with included hardware
Not Yet Reviewed
$91.05
$50.08
Eliminate the hassle of fabricating a rear crossmember, and position your engine and transmission where you want them, with Trans-Dapt Performance universal transmission mounts. They'll support most standard and automatic transmissions with open channel frames and widths of 26 in. to 36 in. between the frame rails. With 0.114 in. wall thickness, they're available with no drop, 3 in., and 6 in. drops, either as kits with braces and mounting pads or as the crossmember alone.
( 48 )
$92.99
—
$119.99
Whiteline motor mount inserts are built to handle the demands of high torque and power output engines by limiting the amount of movement the engine and drivetrain will place upon the pitch stop. Utilizing low compliance bushing technology, this eliminates the slop, twisting, and shudder found in the OEM rubber bushings, allowing for a faster, positive, responsive feel of power delivery, both on and off the throttle. These motor mount inserts are available for both front and rear mount applications. Find the Whiteline parts to fit your vehicle and you'll notice the performance upgrade immediately!
( 1 )
$105.88
When swapping out the engine in your hot rod, you need motor mounts and inserts that you can count on. Trans-Dapt has done all of the work for you in making these engine swap motor mounts. The units are available for a variety of mounting styles, and they're made with quality materials, such as rubber, steel, and polyurethane. These motor mounts are designed for specific vehicle and/or engine applications, so you can be assured of a perfect fit and great performance.
( 347 )
$98.99
—
$99.99
Fix the vibrations caused by failed OE bushings with Crown Automotive motor mounts. Sold individually and in kits, the build quality is as good as or better than the units they are replacing. These mounts include steel or aluminum brackets and rubber/steel bushings which are flexible enough to absorb engine motion. Replace your weak, broken, or oil-soaked engine mounts with quality Crown parts, available for fitment on a wide range of Jeep, Dodge, Chrysler, Plymouth, and Eagle vehicles.
( 13 )
$50.99
—
$115.99
ARB differential breather kits are important to vent air pressure in drivetrain assemblies, and they eliminate the shortcomings of your factory breathers—especially when driving through water crossings. ARB units are high-flow, zero backpressure, zero vacuum breather systems. Each features a high-flow air filter within a central manifold that will allow up to four drivetrain assemblies to be vented to one central location--ideally somewhere on the vehicle that will be above the water level at all times. ARB differential breather kits are intended to replace your factory breathers and contain enough fittings and tubing to connect at least two drivetrain assemblies. Additional features and benefits include: * Axle breather manifold is machined from billet aluminum and anodized, making it lightweight and resistant to the elements * The manifolds have four axle breather ports, allowing for 1-4 breather lines to be connected * Very compact design, allowing them to be installed in virtually any location * The kits come with self-tapping screws, but the manifold mounting holes are large enough to allow mounting using an M6 (1/4 in.) bolt or stud, which is the common size in most vehicle engine bays * The air filters are the ARB compressor air filters, which are splash-resistant with washable high-flow sintered bronze filter cartridges * 8mm polyethylene tubing is flexible, oil-resistant, water-resistant, and heat-resistant * 8mm tubing has been selected over the standard 6mm tubing to improve the airflow and reduce the chance of oil blockages in long breather lines * 8mm push-in fittings make installation simple and fast * Kits include anodized aluminum manifold with 5 ports (breather lines and air filter) and 2 mounting holes, air filter assembly, fittings, plugs, polyethylene tubing, screws, and cable ties
( 3 )
$89.95
When doing a clutch swap or transmission repairs on your Ford Modular equipped vehicle, the bellhousing bolts can get rounded off or misplaced. That's where Ford Performance Parts Modular bellhousing installation kits are sure to come in handy. The kits include bolts to mount the bellhousing to the engine block, two starter index plate to bellhousing bolts, and a clutch fork pivot ball stud. All fasteners are plated for corrosion resistance and the bellhousing bolts feature blue thread locker already applied. For all of your Ford parts and accessory needs, pony up with genuine parts from Ford Performance Parts.
( 5 )
$78.99
These universal transmission crossmembers from Competition Engineering make transmission installation and removal quick and easy. They include a 1 5/8 in. x .134 in. wall tube, four flat mounting tabs, and four concave mounting tabs with all hardware. Welding is required.
( 16 )
$101.99
Pacific Performance Engineering heavy-duty PTO side cover plates are designed to add strength to the center of the transmission case and eliminate transmission oil seepage at the mating surface. They are manufactured from durable cast aluminum, and feature cooling fins double the surface area (60.74 sq. in.) when compared to stock (30.62 sq. in.). Thereby increasing heat dissipation from the transmission oil. The plates include mounting hardware and gaskets to complete the installation.
( 2 )
$80.99
Trans-Dapt Performance crossmembers eliminate the need to fabricate a rear crossmember. Their vehicle-specific transmission crossmembers are available as kits, with braces and mounting pads, or as the crossmember alone. Position your engine and transmission properly and exactly where you need them with quality, durable crossmembers from Trans-Dapt.
( 111 )
$70.99
—
$89.99
If you're installing a bigger series gear set onto a smaller series carrier, then you'll need Moser Engineering ring gear spacers. They are precision-machined to ensure trueness, provide proper backlash, and offer a secure mount for your ring gear. Longer ring gear bolts are included for installation.
( 5 )
$95.00
Keep your fuel tank secure with straps from Crown Automotive. Whether you're in need of a new center strap, end straps, or maybe you need to replace all of them, Crown has choices to keep your Jeep's fuel tank in place.
( 5 )
$66.99
—
$83.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
