Availability
On Sale
Replace those old oil pressure sending units with a quality piece from Standard Motor Products. Their replacement oil pressure warning light sending units are designed to meet OEM specifications. You can trust your electrical system when you put it in the hands of Standard Motor Products.
( 34 )
$104.99
$94.49
On Sale
Holley aluminum fuel cells come in a several variations for nearly every race application, and Holley's fuel gauge sending units are the correct replacements to restore consistent level readings. Offered in an 8 or 9 in. depth for 5- and 10-gallon or 15- and 20-gallon fuel cells respectively, both styles have a tube design that acts as a damper, saves space, and eliminates the need for a float arm. They are 0 to 90 ohms (empty-full) to work with most aftermarket gauges, have a standard SAE 5-bolt mounting pattern, and include gasket and mounting hardware. Holley fuel gauge sending units are E85 compatible. Choose the best fit for your fuel cell.
( 1 )
$68.25
$61.45
On Sale
Shafer Classic Reproductions offers fuel tank sending units for a variety of applications from the 1950s, '60s, and '70s. These replacements are manufactured to OE specs to ensure proper fit and years of performance. If your fuel gauge isn't displaying the proper data from the gas tank, you may need a new sending unit. Order the model recommended for your vehicle.
( 5 )
$57.99
$52.19
On Sale
Holley Sniper fuel gauge sending units can be used as replacements for your existing units. Promising to be a big help during your installation, these gold iridited Sniper EFI senders are available in several ohm ranges. So, should you decide to upgrade your dash to aftermarket gauges, Holley has the right range for your project.
( 5 )
$74.95
$67.45
On Sale
Agility Auto Parts offers a complete line of fuel tank sending units covering a wide variety of North American vehicles. These sending units are engineered to meet or exceed all OEM specifications. They're corrosion-resistant, leak-resistant, and made of durable materials for long-lasting use. Agility Auto Parts fuel tank sending units are available in a range of sizes and attachment styles. Order the model recommended for your applications.
( 2 )
$57.99
—
$118.99
$52.19
—
$107.09
On Sale
Aeromotive Gen II fuel tank sending units are offered as replacements. They will work with any Gen II Stealth tank with the same ohm range for the application in question. These tube-style level sending units are quality constructed to provide accurate and current fuel level information to your dash gauge. Select the proper ohm range unit for your application.
Not Yet Reviewed
$81.15
$73.04
On Sale
FUELAB offers replacement fuel level sending units to ensure accurate readings on your dashboard fuel gauge. These important accessories can be added to your FUELAB Quick Service Surge Tank (QSST) or your existing fuel cell surge tank. Additional details: * 8 in. depth * 0 Ohms empty, 90 Ohms full * Fits most aftermarket and OEM gauges * Constructed from high-quality materials for reliability and longevity * Electrical sending unit
Not Yet Reviewed
$100.00
$90.00
On Sale
Are you tired of guessing how much fuel is in your tank? Scott Drake replacement sending units come complete with either an original brass or an economical plastic float. Scott Drake inspects, pressure-tests, and performs an OHMS test on all of their sending units. Scott Drake manufactures these units from quality materials and they feature zinc plated steel construction to prevent corrosion.
( 63 )
$58.25
$52.45
On Sale
Optimizing your dash solution to display your vehicle speed is simple with Holley GPS digital USB modules. The 46 in. USB cables allow you to install the digital display unit virtually anywhere on the dashboard—without the need for external sensor information. Eliminate old, noisy mechanical speedometer cables and step up to Holley's accurate GPS speedometer output module. Additional information: * USB connection for user-friendly, plug-and-play installation * Magnetic base provides for multiple mounting solutions * 10 Hz refresh rate for ultra-accurate, real-time speedometer output * Requires clear line-of-sight with the sky for satellite acquisition * Can only be used with 553-106 or 553-109 digital dashes
Not Yet Reviewed
$106.95
$96.25
On Sale
AEM Electronics PSIG sensor kits feature high-quality sealed housings for maximum durability. They have an integral weatherproof connector for an easy plug-in installation. Kits are available for boost, exhaust gas temperature, nitrous oxide, brake pressure, inlet air temperature, or UEGO replacement gauges. PSIG sensor kits are offered in brass or stainless steel. Use brass sensors where you need a good reference to what pressure is being seen; e.g., reference/information of manifold pressure, not for ECU calibration. Stainless sensors should be used where you need exact details of the pressure; e.g., calibration/critical MAP sensor information for the ECU. Features include: * Stainless steel sensors are accurate to within 1-percent of full scale (pressure sensors) * Brass sensors accurate to within 3-percent of full scale (pressure sensors) * High-quality sealed sensor housings are virtually impervious to automotive fluids (360-degree welded wetted area) * Connector, pins, and pin lock included
( 18 )
$87.15
$78.45
On Sale
AEM Electronics fluid temperature sensor kits allow you to monitor the temperature of your water, oil, or coolant. Several styles are available and offer sensor, connector, and pins. Select the AEM fluid temperature sensor kit needed for your application. Features of kits available: 30-2011: * Temperature sensor, 3/8 in.-18 NPT, aluminum bung, waterproof connector, pins and wire seals * Operating temperature: -40 to 135 degrees C/-40 to 275 degrees F 30-2012: * Temperature sensor, 1/8 in. NPT, waterproof connector kit and pins * Operating temperature: -40 to 200 degrees C/-40 to 392 degrees F 30-2013: * Temperature sensor, 1/8 in. NPT, High performance DTM-style connector, aluminum bung, connector, and pins * Operating temperature: -20 to 150 degrees C/-4 to 302 degrees F
( 6 )
$70.79
$63.75
On Sale
Keep track of temperature levels with AEM Electronics air inlet temperature sensor kits. They include an aluminum weld-in bung, connector plug, and flying lead and sensor to complete the installation. Monitoring engine functions can stop a problem early--pick up AEM Electronics air inlet temperature sensor kits for trouble-free performance.
( 8 )
$67.55
—
$70.79
$60.75
—
$63.75
On Sale
Get fuel where you need it with one of these FUELAB draw straw tube kits. They're manufactured from durable materials and install easily with the fuel pump module.
( 3 )
$58.85
$52.96
On Sale
AEM Electronics EGT thermocouples are economical and fast responding K-type thermocouples. They include a closed-tip TC sensor with a protective inconel sheath, 10 ft. extension wire, 1/8 in. NPT compression fitting, and ring and terminal harness. AEM EGT thermocouples are available individually or in 2- or 4-packs. Specs: * Maximum temperature: 1800 degrees F (982.2 degrees C) * Sheath length: 3 in./76.2mm * Sheath diameter: 0.125 in./3.18mm * Termination: Ring terminals * Wire length: 12 in. * Accuracy: Greater of 3.96 degrees F/2.2 degrees C or 0.75 percent
Not Yet Reviewed
$117.95
$64.95
On Sale
Adding a Phantom direct drop-in fuel pump will require an Aeromotive fuel level sender bracket. Made from stainless steel, they are available in several styles to cover a specific range of GM truck applications. Coordinate your bracket choice with the make and year range of your vehicle.
Not Yet Reviewed
$79.00
$71.10
On Sale
Aeromotive fuel pump bladder baffle sets are a complement to the APEX Phantom systems. They open and close the door with the Phantom flow control technology while providing a continuous, high fuel flow into the baffle. It's critical to allow a large volume of fuel to flow into the baffle naturally from the surrounding tank—and also important to keep it there. The Phantom bladder baffle can ensure this. Installed in the inlet passages at the base of the Phantom bladder, the new Phantom bladder baffle increases the flow area into the bladder to promote rapid fuel recovery from the surrounding tank—while deploying a PTFE check ball that acts to keep that critical fuel in the bladder, preventing it from escaping during hard acceleration, cornering, and off-angle vehicle maneuvers. The units are constructed with CNC-machined billet aluminum valve bodies, which are then anodized and loaded with a PTFE check ball and locked into the Phantom bladder with a PTFE retaining washer. Phantom bladder baffles are designed for durability and are fully compatible with gasoline and ethanol fuels. They require no special tools and may be used in any existing or new Phantom bladder, with the Apex Phantom, or as a stand-alone solution to slosh control.
Not Yet Reviewed
$118.25
$106.42
On Sale
Classic Instruments tube-type fuel senders are designed to operate correctly with any classic fuel level gauge. They are available in multiple lengths to cover many automotive applications.
( 108 )
$132.95
—
$160.95
$73.95
—
$88.95
On Sale
Nitrous Outlet ProMax Progressive Controller nitrous pressure sensors allow the controllers to see accurate bottle pressure. Designed to be used with the ProMax Progressive Controllers, the sensors have 1/8 in. NPT male threads for easy connection to the pressure source.
( 1 )
$117.99
$100.29
On Sale
Know what gear you are in with Classic Instruments gear selector sending unit kits. These kits include a transmission-mounted sensor and interface module that works with Classic Instruments' gear selector gauges or individual LED indicator lights. Features: * Kit includes mounting hardware * Works with most 3- and 4-speed automatic transmissions * Easy push-button calibration * Also works as backup light trigger or neutral safety switch
( 4 )
$178.95
$98.95
On Sale
Mishimoto electric fan controller kits are applicable for any vehicle with a 12 V electric fan—and they have an adjustable activation temperature from 150 to 240 degrees F. The thermal switches are designed for use with one or two electric fans drawing a combined 25 amps or less, and have a built-in A/C override feature. Kit includes: * Probe or 1/8 in. NPT-style temperature sensor to fit your needs * 7 ft. of wire for installation in nearly any size vehicle * Wiring connectors and hardware for installation
( 30 )
$88.95
—
$95.95
$80.06
—
$86.36
On Sale
Holley analog standalone gauges provide you with a simple yet modern way to monitor all types of engine and drivetrain functions. Their slim-style mounting requires very little depth, and all of the gauges feature dimmable LED backlighting to ensure you can always see the indicator, no matter the environment. Holley analog standalone gauges are available in a variety of data types and ranges for temperature and pressure monitoring, along with programmable fuel level and voltage options. Features include: * Designed for a 2 1/16 in. openings * Available with black face with white lettering or white face with black lettering. * LED dimmable backlit design with red pointers makes them easy to read day or night * All gauges are electric-style and include sending units depending on gauge type * Pointer is driven by either a high-torque internal stepper motor or internal microprocessor (depending on model) to ensure accurate movement in street and racing conditions * Spin lock ring threads to back of gauge case for simple and secure gauge mounting * CNC-machined billet aluminum bezels with anodized finish * Bezels are threaded for easy replacement; multiple bezel options available * Each gauge is tested to ensure a top-quality and accuracy
( 2 )
$192.95
$106.95
On Sale
Holley EFI analog display gauges use digitally-delivered information over Holley's sophisticated CAN bus or wire directly to your sending unit, providing your ride with a classic readout. Those using the bus get their data from the Holley ECU, meaning that you don't have to run wires all over the vehicle. All you have to do is run a single cable to the ECU and then daisy-chain the rest. Holley analog gauges are available to monitor a variety of automotive temperature and pressure functions, along with programmable fuel level and voltage options. Product features include: * Available with black face with white lettering or white face with black lettering. * LED dimmable backlit design with red pointers makes them easy to read day or night * All gauges are electric style and may include sending units depending on gauge type * Pointer is driven by either a high-torque internal stepper motor or internal microprocessor (depending on application) to ensure accurate movement in street and racing conditions * CNC-machined billet aluminum bezels with an anodized finish on some models * Threaded bodies allow a single bezel nut to hold the indicators firmly in place * Bezels are threaded for easy replacement with multiple bezel options available * Each is tested to ensure a top-quality, accurate gauge
( 15 )
$179.95
$98.95
On Sale
Crown Automotive fuel pump modules are great OE replacements for your rig. These quality units will restore the filtering, pumping, and data-sending characteristics to keep your fuel system working efficiently. When you want a good fit and proper function, choose Crown Automotive modules.
( 15 )
$153.99
$138.59
On Sale
Frostbite fan and shroud electric relay kits enable you to custom-configure your fans as pusher or puller types for increased cooling performance. Also, they provide a reduction in noise/vibration in your engine bay. Kit features: * Universal fitment for compatibility with all types of vehicles * Up to 40 amp draw capacity * Switch turns fans on at 185 degrees and off at 170 degrees * Can be installed on positive or negative grounded vehicles * Includes wiring harness, sensor, fuse, relay, and wiring terminals
( 4 )
$144.95
$94.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
