Availability
On Sale
MSD Street Fire spark plug wire sets deliver high performance at value prices. The wires feature 500 ohms per foot of resistance for improved spark delivery and power, with a helically wound conductor that suppresses EMI. They're also built to last and feature 8mm silicone and synthetic jackets to resist heat and abrasion, silicone boots to protect against high exhaust temperatures, and an Aramid core to provide great strength and durability. A crimping tool is included with universal sets.
( 433 )
$61.45
—
$92.25
$55.35
—
$83.05
On Sale
These MSD spark plug wire bulk rolls are available in 6, 25,100, and 300 ft. rolls. The heli-core wire comes in blue, while the super conductor wire comes in red or black.
( 13 )
$112.95
$101.65
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1970 )
$112.95
—
$172.95
$95.95
—
$101.65
On Sale
MSD replacement plug wire boot and terminal kits are perfect for enthusiasts who build their own wire sets or need to replace damaged boots. The boots are made from a high-temperature silicone compound and feature a gray finish. The terminals have large crimp tabs to grasp the wire, and wide contacts to grip the distributor cap receptacle.
( 103 )
$59.25
$53.35
On Sale
MSD replacement spark plug wires are available in two styles to suit your automotive needs. Each replacement wire is about 48 in. long. They come with the proper size boot and terminal and also supply you with a mini stripper/crimper so the wire can be custom tailored to your application.
( 21 )
$59.25
$53.35
On Sale
MSD boots are designed with longevity in mind. Each boot provides excellent heat resistance, as well as maximum protection against spark loss.
( 131 )
$74.79
—
$112.95
$67.35
—
$101.65
On Sale
MSD offers universal wiring harnesses to simplify the installation of a MSD 6 Series box on late model vehicles. The harnesses plug in between the ignition coil and the factory coil connector. Four wires with corresponding colors and matching connectors then connect directly to the MSD 6 wires. These harnesses reduce the installation time, reduce or eliminate cut wires, and allow you to quickly convert back to the factory ignition.
( 48 )
$59.25
—
$77.15
$53.35
—
$69.45
On Sale
MSD Smart Coils were developed to produce more spark energy while consuming less power without sacrificing voltage output. This means you get hotter spark at the plug to burn the maximum amount of fuel in each cylinder while using less power from your electrical system. Smart Coils are compatible with popular aftermarket electronic fuel injection systems and will run on traditional 12 V or 16 V electrical systems found in race applications. The coils feature unique elongated mounting holes to accommodate popular mounting brackets or allow them to bolt in place of an LS coil with 72mm bolt spacing.
( 1 )
$131.95
$92.59
On Sale
After an MSD DIS-2 series ignition control is installed on the waste spark ignition system of some vehicles, the ECM of the vehicle will not be able to receive a cam sync signal. These MSD cam sync generators produce a cam sync signal after startup for the factory ECM. This is done by detecting a cylinder that is under compression through its signal wire, which is wrapped around the designated spark plug wire.
( 2 )
$106.95
$96.25
On Sale
MSD 6EFI ignition coils produce high-spark energy to ensure the air and fuel in your engine get burned completely to improve starting, throttle response, and supply powerful spark throughout the RPM range. Designed to match the 6EFI ignition, the 6EFI coil has a clean black appearance with logos laser-etched on a black anodized aluminum mounting bracket, and is supplied with four, self-tapping mounting screws, plus a plug-in harness with color-coded wires to facilitate an easy installation. When running an MSD Atomic EFI or similar throttle body fuel injection system with a 6EFI ignition box, the 6EFI ignition coil is made for you! In addition, an MSD spark plug wire boot and terminal come in the kit to convert your existing coil wire from a female socket connection, to male high energy ignition (H.E.I.) connection if needed.
( 2 )
$65.89
$59.35
On Sale
These cap and rotor kits from MSD are replacements for the 44 amp Pro Mags, or the 12 amp band clamp models. The caps are molded form alkyd material and have excellent high-voltage characteristics. Brass spark plug style terminals are used for solid connections and a firm grip to the plug wire terminal. The rotors are injection-molded from Dupont Rynite, a strong glass-reinforced material. Tall vanes are molded on the top of the rotors to stir up the air, preventing ozone buildup and crossfire from occurring. A brass/stainless steel rotor tip is screwed into the rotor, ensuring a long life at high rpm.
( 3 )
$79.09
$71.15
On Sale
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 515 )
$69.75
—
$72.49
$62.75
—
$65.25
On Sale
Ensure that you have the finest distributor cap available by using one of these MSD replacement distributor caps. They're designed with performance in mind, are molded from a high-quality, voltage-insulating material, and use low-resistance terminals for maximum conductivity .
( 197 )
$57.49
—
$79.05
$51.75
—
$71.15
On Sale
MSD Blaster coils give your GM maximum voltage output! With windings and construction similar to MSD's Blaster 2 coils, these have an increased turns ratio, plus lower primary resistance than your stock coils. The Blasters will work with stock GM coil ignition systems, as well as MSD-equipped cars and trucks. Looking to get a little more output voltage from your GM ignition system? Just bolt in one of these MSD Blaster Coils.
( 87 )
$78.15
$70.35
On Sale
MSD Cap-A-Dapts have HEI-style posts, an adjustable rotor to allow proper phasing (Chevy and Mallory YL only), and wider post spacing to prevent crossfire and ionization. The kits include a high-quality cap with brass terminals, a rotor, and a cap spacer.
( 44 )
$86.99
$78.25
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
