Availability
Ford Performance Parts valve pushrod guideplates are designed to support your pushrods in order to keep your rocker arms centered on the valves. These guideplates are available in both flat and raised styles. The raised-style guideplates support the pushrods closer to the rocker arms, stabilizing the pushrods.
( 2 )
$75.99
Cometic Street Pro bottom-end gasket sets gather all of the necessary parts in one handy kit, tailored to specific years/makes/models. Rebuilding or servicing an engine can be quite an ordeal--trying to locate all of the correct gaskets, seals, washers, and O-rings for the many sections. If the fit isn't perfect, you know the messy results.There's no need for you to hunt down replacement seals for oil pans, water pumps, pickup tubes, cranks, drains, timing covers, retainers... you get the picture. Match up your vehicle with the corresponding Cometic Street Pro bottom-end gasket set and order today!
( 2 )
$69.57
—
$75.78
Flatout offers a comprehensive line of performance gaskets, including header gaskets, which are engineered from top-grade materials to take on high-heat produced by your exhaust headers. Their high thermal conductivity pulls heat away from the heat source and allows them to expand and contract without damage. Flatout header gaskets feature smooth contours, accurate hole locations, and tight tolerances to provide an exceptional fit and seal. Get the most performance out of your engine, use Flatout header gaskets--they seal where others don't!
( 10 )
$50.99
Fine Lines fuel lines are pre-bent and flared with the correct threaded fittings which reduces your install time tremendously. Their tank to engine fuel lines run from the back of the vehicle to the front, and will either connect to the fuel pump at the motor or run directly to a fuel rail. The mild steel lines are Galphan coated for added protection, while their stainless steel lines are T304, but are of a special softer blend to help with any possible leaks. Fine Lines carries a wide variety of compatible lines (main, return, vapor lines, etc.) for different years, makes, and models, including classic cars. Choose the lines designed for your vehicle.
( 14 )
$56.81
—
$102.33
Lokar's flexible and machined engine dipsticks are designed to coordinate with their flexible transmission dipsticks. The slim design allows for an easy installation inside of your headers to work with OEM and Sanderson cast exhaust manifolds. They have clearance for block-hugger headers or can be applied straight into the engine block (without tube), depending on your application. All engine dipsticks feature an E-Z read aluminum or steel stick for an accurate measurement of engine oil.
( 349 )
$102.95
Lokar Midnight Series flexible engine dipsticks are designed to coordinate with Midnight Series flexible transmission dipsticks. Their slim design allows for the easy installation inside of headers to work with OEM and Sanderson cast exhaust manifolds. They have clearance for block-hugger headers or can be applied straight into the engine block (without a tube), depending on your application needs. All engine dipsticks feature an E-Z read aluminum or steel stick for an accurate measurement of engine oil. Order the model recommended for your vehicle year/make and engine family.
( 108 )
$113.95
Brighten and freshen up your engine compartment with a Scott Drake oil cap. These Scott Drake oil caps not only look sharp, but they will also keep oil in its place.
( 92 )
$51.36
—
$57.09
If you've lost your cap, prevent oil leaks with Motorcraft oil filler caps specifically made to fit your Ford vehicle. They are made of high-material, work perfectly, and look just like the OE components. They are the perfect replacements for your vehicle, resisting corrosion and abrasion to ensure long-lasting durability.
( 4 )
$61.99
Common symptoms of poor intake manifold gasket sealing may include leaks, rough idling, and stumbling. For your next engine build, use Mahle Original intake manifold gaskets to seal your engine up tight! It's a known fact—proper sealing is vital to create maximum horsepower within the engine, and these gaskets will allow you to achieve a good, positive seal. They utilize premium materials and are precisely designed to match OE quality, fit, form, and function. Order the intake manifold gasket designed for fitment on your particular vehicle by Mahle Original, one of the most trusted names in professional sealing solutions for engines and exhaust.
( 99 )
$53.99
Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
( 251 )
$74.99
—
$97.99
PRW rocker arm adjuster screws are designed to thread into your rocker arm. They are made of hardened steel and feature a black oxide finish for maximum durability. The screws can be adjusted to the pushrod by using the internal Allen head and the 12-point locknut.
( 7 )
$74.27
These Milodon stainless steel oil dipsticks are CNC-machined from billet stainless steel to stay bright and rust-free. All dipsticks feature an O-ring seal top and bottom to positively seal against water & dirt. The braided stainless steel hose will flex around headers, tube mounts, and anything else in the way.
( 176 )
$86.95
High-rpm can cause fluctuation in your valvetrain, leading to damaged parts. Add strength and stability in your valvetrain with PRW rocker arm pedestals and stands.
Not Yet Reviewed
$88.01
Sealed Power stock replacement oil pumps meet or exceed OE standards for oil delivery volume and pressure. With cast iron bodies and precision machining, they can be relied upon for adequate lubrication in both stock and mild performance rebuilds. Features include: * Direct replacement * Manufactured to strict engineering quality standards * No special tools required * Constructed of high-quality materials for durability
( 35 )
$50.99
—
$71.99
Oil volume is nothing to take lightly, so why reuse an old oil pump or settle for something less than great, when you can have a Sealed Power pump? They've been making quality, reliable performance pumps for decades. These high-volume oil pumps have increased rotor or gear section lengths for increased oil delivery to critical areas under extreme conditions. Their sturdy cast-iron pump body handles the stress associated with high rpm and added oil volume. The extra volume is helpful in maintaining oil pressure in rebuilds.
( 57 )
$94.99
—
$104.99
Summit Bucks
When you're looking to replace leaking or worn-out engine seals, Fel-Pro head gasket sets have you covered. Ideal for your stock rebuilds or street-driven cars and trucks, Fel-Pro gaskets will have you back on the road in no time. They're available in hundreds of configurations for fitment on countless vehicles and engine types. Order the set designed for your car, truck, van, or SUV. (These gaskets are not intended for race applications.)
( 371 )
$103.99
Now you can easily move your vehicle's oil filter to a more convenient location for quicker and easier filter changes with one of these Derale Performance engine oil filter relocation kits. They work great for engine swaps, too! The kits are available for hundreds of vehicles; order the model recommended for your application.
( 38 )
$80.28
—
$112.40
Mahle is the world's largest manufacturer of piston rings. Their tremendous research and development and extensive OE connections mean that Mahle Original standard piston ring sets have the technological edge. Things like narrow compression rings, steel compression rings for gasoline engines, low-tension oil rings, and coated compression rings for diesels all came from OE. Mahle's entire Original line proves time and again that it should be the ring of choice under every hood - regardless of the application. Mahle Original standard piston rings offer high tensile strength, high yield strength, and excellent hardness with low ring mass. These factors lead to stress resistance, minimal groove pound-out, long service life, cylinder conformability, oil economy, and good blow-by control with low friction. Whether you're repairing a modern computer-controlled engine, or rebuilding an older engine, be sure to specify Mahle Original standard piston ring sets (formerly Perfect Circle) … trusted by professional automotive technicians for over 100 years.
( 11 )
$59.99
—
$107.99
Mahle Original offers engine gasket sets for a variety of cars, trucks, and Jeeps. These full gasket sets include the many seals needed to rebuild your engine—all in one convenient package. The gaskets are made from a variety of materials, such as multi-layered steel or molded rubber, for use on various components. Order the Mahle Original engine gasket kit recommended for precise fitment on your vehicle application.
( 22 )
$103.99
Melling Mell-Lube engine assembly and break-in fluid contains a special additive that plates wear surfaces to prevent scoring or galling during engine startup. Mell-Lube also contains corrosion inhibitors to prevent rust and pitting to new engines.
( 7 )
$78.99
If you're rebuilding the top-end of your engine, you'll want one of these Mahle Original head gasket sets. They are perfect for stock rebuilds of engines for street-driven cars and trucks. Mahle Original head gasket sets are packaged in shrink-wrapped trays, giving you the ability to view the contents prior to opening the package. You receive every part you need to complete your gasket repair in one package (unless otherwise stated). Mahle Original utilizes OE equivalent or better materials in all their head sets, providing you with Mahle's Best Solution for your sealing needs. Mahle Original head gasket sets give you original equipment form, fit, and function, so they fit just like the originals. These gasket sets are not intended for race applications.
( 29 )
$68.99
—
$80.99
These Summit Racing™ remote oil filter kits include a bypass adapter, filter mount, 8 ft. of oil hose, barb fittings, stainless steel hose clamps, mounting hardware, and instructions. These kits require a Fram PH8A or equivalent oil filter, which is not included.
( 188 )
$60.99
—
$74.99
Do you need to replace that beat-up air cleaner? Scott Drake offers original-style air cleaners that will clean up the ugliest of engine compartments. Scott Drake manufactures these air cleaners using quality materials, ensuring years of performance.
( 131 )
$70.15
—
$74.59
With their built-in oil and coolant seals, patented SCE Titan copper self-sealing head gaskets require no additional sealants. That means you get user-friendly installation, combined with reliable fluid sealing, plus the unbeatable strength of solid copper gaskets. The fluid seals are bonded to both sides of the gaskets and cleverly offset to allow the annealed copper of the gaskets to deform around them for a better seal, especially in the O-ring combustion-seal area. Recommended for liquid-cooled racing engines with O-rings in the heads or block, these one-of-a-kind copper head gaskets can even be used on street machines with no worries about coolant leaks! For perfect sealing strength every time, introduce your engine to SCE Titan copper head gaskets.
( 6 )
$107.50
—
$125.42
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
