Availability
Showing In Stock Items. Show All 82 Items.
On Sale
In many performance applications, such as off-road, drag race, marine, and oval track racing, strong vibration forces can be transmitted through the chassis to your MSD ignition units and coils. These MSD vibration mounts are designed to help protect your ignition box or ignition coil from extreme vibration and the damage associated with it.
( 62 )
$59.25
$53.35
On Sale
REDARC in-vehicle battery charger mounts are vehicle-specific to aid engine-bay installations of REDARC's award-winning BCDC in-vehicle DC-DC chargers. Three bracket variants are available, including a universal mounting bracket, and each bracket style has been carefully designed to ensure that both the size and mounting style is tailored for secure fitment within the engine bay. The brackets are constructed from durable 304 stainless steel, each one designed to fit existing mounting points in the vehicle, which allows for installation into the front of the vehicle allowing for cooler airflow, away from high-temperature areas and ensuring optimal performance. These brackets are built and tested to survive through water, heat, dust, and vibration. All brackets include instructions and fasteners to complete the installation.
Not Yet Reviewed
$69.00
$58.65
On Sale
Holley ECU mounting brackets allow you to comfortably install either the Dominator ECU, Holley HP, Terminator X, or Terminator X-MAX under your Mustang's front passenger seat. They're designed to work with stock seats and seat tracks (modified/race seats may or may not accommodate them). You simply route all your ECU harnesses through the firewall--properly route the wires, install the unit followed by the ECU, and then reconnect your wires and go! Use your laptop to fine-tune the ECU without popping the hood and protect it from engine bay heat with Holley ECU mounting brackets. Order the brackets recommended for your application.
( 3 )
$110.95
$99.85
On Sale
ICT Billet remote mount coil brackets mount eight coils and are designed to work with a wide variety of LS engine swaps. They are available to fit most OE and some Holley EFI coils. Made from aerospace grade billet aluminum, most feature a natural finish. The kits include two sets of brackets, bolts, and spacers where applicable. They work great for turbo setups or whenever a clean-looking engine bay is important. Most ICT Billet remote mount coil brackets are designed to be used with LT1 Camaro ignition wires.
( 20 )
$61.99
$55.79
On Sale
Edge cast aluminum pillar display mounts offer a more permanent and vehicle-specific mount for their CTS3 based devices. The mounts are specifically engineered for an OEM look and fitment to place your CTS3 monitor in the perfect viewing position without obstructing your view of the road. They provide a sturdy mounting location to replace Edge's standard suction cup style mounts. Coated in a sleek matte black finish, they offer a clean look in any interior and can be painted for a custom finish, if desired. Order the model recommended for your vehicle. Additional details: * Cast aluminum for rigidity and solid mounting * Custom molded for vehicle specific fitment * Paintable finish for complete end user customization * No drilling required, mounts using existing A-Pillar grab handle location * Locates monitor in optimum viewing position * Hardware and dual T-slot mount included * Works with all CTS3 devices, including Insight, Evolution, and Juice * Also works with older CTS2 and CS2 style monitors * May work with other aftermarket mounts that use similar uni-ball construction
( 3 )
$61.89
—
$81.75
$55.75
—
$73.55
On Sale
Edge A-Pillar display mounts have been specifically engineered for an OEM look and fitment to place your monitor in the perfect viewing position without obstructing your view of the road. Molded and cast from aluminum, the display mounts offer a sturdy mounting location to replace our standard suction cup-style mounts. Coated in a sleek matte black finish, they offer a clean look in any interior and are paintable for a customizable look. Features: * Cast aluminum for rigidity and solid mounting * Custom molded for vehicle specific fitment * Paintable finish for complete end user customization * No drilling required, mounts using existing A-Pillar grab handle location * Locates monitor in optimum viewing position * Hardware and dual t-slot mount included * Works with all CTS3 devices including Insight, Evolution, and Juice * Also works with older CTS2 and CS2 style monitors * May work with other aftermarket mounts that use similar uni-ball construction
Not Yet Reviewed
$59.69
—
$71.69
$53.75
—
$64.55
On Sale
COBB Tuning Accessport V3 mounts provide options. Whether A-pillar mounting or center console mounting, COBB mounts provide the perfect platform for your V3. Most are made from high-quality ABS plastic with swivels so you can set the optimum viewing angle. Secure your Accessport V3 in one of these sturdy COBB mounts.
Not Yet Reviewed
$60.00
—
$69.98
$51.00
—
$59.48
On Sale
Keep your XS Power battery in place with their line of XS Power battery mounts. These hold-downs feature lightweight aluminum construction for durability. The mounts are available in a variety of styles to accommodate numerous XS Power battery models.
( 4 )
$54.99
$50.59
On Sale
Holley Sniper EFI HyperSpark ignition coils are the perfect ignition upgrade to complement your Sniper EFI installation. This high-output coil produces 135mJ of spark energy when used with the HyperSpark ignition box, ensuring complete combustion. The ignition coil comes self-contained in its own mounting bracket, and mounting hardware is provided to facilitate installation. Holley Sniper EFI HyperSpark ignition coil features: * Works with Sniper EFI for easy plug-and-play installation * Ignition coil connector removes any doubt of loose connections at the ignition coil * Integrated ignition coil bracket simplifies mounting ignition coil
( 44 )
$61.19
$55.05
On Sale
New for the Holley Sniper EFI product line is a factory replacement Sniper EFI canister-style ignition coil. This ignition coil is potted with a premium-grade epoxy, making it perfect for high-vibration environments—and it can be mounted in any direction, even if it's horizontal, vertical, or upside down. "No oil" means "no failure" for multiple mounting positions. The Sniper EFI canister coil is perfect for anyone wanting to upgrade their ignition system, while maintaining a factory look under the hood. Features: * Metal canister is epoxy filled to protect the internal coil windings from high-vibration applications * Improved output coil for electronic ignitions, and MSD ignitions (ballast resistor required for points) * 100:1 turns ratio and lower primary resistance produce high-voltage output
( 6 )
$63.05
$56.75
On Sale
MSD Smart Coils were developed to produce more spark energy while consuming less power without sacrificing voltage output. This means you get hotter spark at the plug to burn the maximum amount of fuel in each cylinder while using less power from your electrical system. Smart Coils are compatible with popular aftermarket electronic fuel injection systems and will run on traditional 12 V or 16 V electrical systems found in race applications. The coils feature unique elongated mounting holes to accommodate popular mounting brackets or allow them to bolt in place of an LS coil with 72mm bolt spacing.
( 1 )
$127.95
—
$131.95
$92.59
On Sale
Artec Industries battery boxes are guaranteed to outperform the competition! Their sleek, no-nonsense design gives you the peace of mind knowing your battery is secure in the most demanding environments. They're precision CNC-cut from 10-gauge cold-rolled steel plate and include high-quality mounting hardware for installation. Your battery will fit snugly, eliminating movement that causes premature wear and shorter life. It's power source security on the trail!
( 33 )
$98.99
—
$131.99
$74.24
—
$98.99
On Sale
MSD 6EFI ignition coils produce high-spark energy to ensure the air and fuel in your engine get burned completely to improve starting, throttle response, and supply powerful spark throughout the RPM range. Designed to match the 6EFI ignition, the 6EFI coil has a clean black appearance with logos laser-etched on a black anodized aluminum mounting bracket, and is supplied with four, self-tapping mounting screws, plus a plug-in harness with color-coded wires to facilitate an easy installation. When running an MSD Atomic EFI or similar throttle body fuel injection system with a 6EFI ignition box, the 6EFI ignition coil is made for you! In addition, an MSD spark plug wire boot and terminal come in the kit to convert your existing coil wire from a female socket connection, to male high energy ignition (H.E.I.) connection if needed.
( 2 )
$65.89
$59.35
On Sale
MSD's distributor hold-down clamps are strong enough to keep the timing locked in place whether you are using an MSD billet distributor or Pro-Mag. These MSD hold-down clamps are precision-made and fit all MSD Pro-Billet Chevrolet distributors and the Pro-Mags. Each of these clamps includes a mounting stud, lockwasher, and nut.
( 24 )
$59.75
—
$86.99
$53.75
—
$78.25
On Sale
Nitrous Outlet switch panels are designed to give you a clean look—and make using multiple nitrous-related options easier to manage with the use of large, easy-to-reach switches. These panels are constructed of water jet-cut aluminum and have a black anodized finish and a custom fit. They'll work with any brand of nitrous system and accessories, and with no drilling needed, will mount to your cup holder, ashtray, or console, depending on the application.
( 18 )
$76.99
—
$112.99
$65.44
—
$96.04
On Sale
Manufacturer Rebate
AutoMeter fuel bridges are designed with cutting-edge technology to gather and distribute sending unit data regarding fuel levels and related sensor functions. The fuel bridges interface with any AutoMeter fuel level gauge and with any stock or aftermarket sending unit. These electrical switch panels are designed with three push buttons and an LED display that allows for easy setup. They're compact in size at 3 1/8 in. wide x 2 1/2 in. tall x 3/4 in. thick. AutoMeter fuel bridges include a low fuel level warning capability and can also turn on an LED or relay.
( 8 )
$76.99
$69.29
On Sale
Standard Motor ABS speed sensors supply information regarding wheel movement to the ABS computer. They're often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again. Replacement ABS speed sensors are available for hundreds of makes/models. Just match up your vehicle specs to order the correct unit.
( 16 )
$55.99
—
$121.99
$50.39
—
$109.79
On Sale
Tired of off-the-shelf race switch panels that just don't fit in with the theme of your ride? Tired of not having proper nomenclature for each switch? Forget fumbling around for switches at night with these New Vintage USA RGB LED toggle switch panels. They include a set of performance graphic text call-out inserts--no more crooked stickers or sloppy labels. Get a professional look that looks great day or night. New Vintage took it one step further, with the first and only backlit switch panels on the market! User-selectable RGB LED lighting allows for 12 different night colors. Additional details: : * Hand-fabricated using New Vintage's exclusive CNC laminate process that eliminates bending, chipped paint and chemical resistance * Includes: Five ON-OFF 15 amp toggle switches, 12 insulated female spade terminals, two back-clamps, four 8-32 button head screws, washers and nuts * Available with or without individual switch guards
Not Yet Reviewed
$99.99
—
$118.99
$89.99
—
$107.09
On Sale
PerTronix Flame-Thrower upgrades your stock coil to something with more wallop! Flame-Thrower coils deliver more than 40,000 V of spark energy to your plugs for fuller, more complete combustion. They're available in a variety of primary resistance ohm versions, with either oil-filled canisters—which keep their low-resistance windings secure and cool for reliable long-term performance—or epoxy-filled canisters for extra vibration protection. Flame-Throwers are available in chrome or black (epoxy, black only). Order the style and options preferred for your application.
( 520 )
$55.65
—
$78.50
$50.08
—
$70.65
On Sale
Don't take chances with old or questionable ignition coils that can leave you stranded. Standard Motor replacement ignition coils are designed to exceed OEM specifications for accurate, maintenance-free operation. They're offered in a variety of styles, such as coil pack, canister, and E-core; and these direct-fit coils are available to replace a wide range of factory part numbers/applications.
( 81 )
$55.97
—
$122.97
$50.37
—
$110.67
On Sale
Compu-Fire ignition coils are available for a variety of automotive and motorcycle applications. They feature correct primary resistance, modern case designs, corrosion-resistant primary and secondary terminals, and are capable (depending on the application) of 40,000 to 60,000 V outputs. Available for: * Most aftermarket dual-fire motorcycle ignition modules * OEM replacement on 1980 to 2002 Harley-Davidson® motorcycles without fuel injection * Compu-Fire DIS-IX distributorless ignition systems * Many automotive points and electronic ignitions
( 1 )
$55.65
—
$67.90
$50.08
—
$61.11
On Sale
For off-road, marine, racing, or other extreme environments, MSD Blaster high-vibration ignition coils are the best choice. Their sturdy metal housing is potted with a premium-grade epoxy to completely encase the coils' primary and secondary windings. This protects the coils from high and low frequency vibrations. Alkyd material is used to form the spark tower because of its high dielectric characteristics. For your convenience, a standard canister-type coil mount can be used, and the coils can be mounted in any position.
( 147 )
$65.35
$58.85
On Sale
Secure your battery properly using one of these ICT Billet battery trays. They are manufactured from aerospace-quality billet aluminum, include a top clamp, and are secured with the included durable Grade 8 mounting hardware. The brackets also meet all NHRA/IHRA safety requirements and are available for the most popular aftermarket high performance batteries.
( 45 )
$99.99
$89.99
On Sale
MSD Blaster 3 coils put out 45,000 V, which are 15,000 more than stock. They also have an oil-filled metal canister and will fit stock mounting brackets. The coils have a unique Power Tower that is twice as high as a standard tower. The extra distance prevents secondary arcing between the primary terminals and the coil center. The HEI-style boot and terminal keep the coil wire secure.
( 65 )
$65.35
$58.85
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
