Availability
Showing In Stock Items. Show All 26 Items.
If your caster/camber gauges have magnetic adapters, then you'll need Intercomp's Wide-5 steel dust covers to use with your magnesium hubs. These Wide-5 dust covers from Intercomp Racing are machined to fit Wilwood and Bert hubs. Check your caster/camber accurately and easily with your magnetic gauge and Intercomp steel Wide-5 dust covers.
Not Yet Reviewed
$79.00
On Sale
Scott Drake drum brake hubs enable you to easily replace your worn-out parts with brand spankin' new steel plates. They are available with either four or five holes for wheel studs, depending on your vehicle.
( 3 )
$98.95
$89.05
Pacific Performance Engineering transfer case pump upgrades cure the dreaded "pump rub." This occurs when the five positioning tabs holding the pump in place wear over time, causing the oil pump to come into contact with the housing itself. The result is a hole in your cover, leaking fluid, and the possibility of heavily damaging the transfer case. PPE transfer case pump upgrade kits consist of a new pump cover that offers a more secure method of mounting the pump, plus all the necessary gaskets. Order the kit recommended for your transfer case model.
( 4 )
$67.49
The Spidertrax Off-Road high performance inboard oil seal kits are the perfect solution for sealing up your Spider 9 housing. Spidertrax starts with billet 6061-T6 aluminum and then machines a fully rebuildable seal housing that's designed to accommodate three external O-rings and two high performance axle shaft seals. Both O-rings and seals are pre-installed. With up to five total sealing surfaces, these inboard oil seal kits ensure oil stays where it belongs—inside the housing. The seal is designed to install on the inboard side of your Spider 9, near your differential. These kits come with one aluminum seal housing, three O-rings, two pre-installed high performance axle seals, and set screw. Key advantages include: * Designed to work with 1/4 in. tube thickness Spider 9 axle housings * CNC-machined 6061-T6 aluminum seal housing is fully rebuildable—both O-rings and axle shaft seals are available separately so servicing your seals is not only possible, but cost-effective * Three O-rings secure the aluminum seal housing inside the Spider 9 axle tube—the aluminum seal housing installs toward the differential side of the housing, so oil stays completely out of the axle tubes * High performance axle shaft seals (two are already pre-installed for you) are designed to accommodate shaft diameters from 27-spline all the way up to 40-spline—they are so stretchy in fact that they also handle almost any kind of axle shaft misalignment * Using the included set screw, each aluminum seal housing is designed to be securely locked inside the Spider 9 housing—this way you know the seal housing stays where it is supposed to when you install your axle shafts
Not Yet Reviewed
$89.00
B&M's remote transmission filters are two to five times more effective than stock filters in removing shavings and other contaminants. You get a permanent remote adapter, a spin-on filter, and installation hardware.
( 6 )
$93.15
McGaughy's offers shift linkage rods for a variety of transmissions on Chevy Tri-Five vehicles. The replacement kits include a shift linkage rod with shifting tab. Order the model recommended for your application.
Not Yet Reviewed
$69.99
Clearance
SCS Gearbox 6-Spline Professional Series quick-change gears have been the proven leader in ultra-high performance quick-change gearing since 1987. They're made of 9310 aircraft alloy for maximum strength and are crown-shaved (ground before heat-treating) to minimize backlash and run out, broached for proper shaft fit, and black oxide finished. Gear sets #1 thru #32 are max lightened where possible, without sacrificing the strength for an average weight savings of 1 1/2 lbs.! The SCS Gearbox 6 spline Professional Series quick-change gears' extra five-step heat-treating process yields maximum gear life for high-stress applications such as Big Block Oswego Super Modifieds, World of Outlaw Sprint Cars, and IROC Series Cars.
( 1 )
$144.99
$89.50
—
$99.50
FAG USA wheel bearing and hub assemblies are compact, lightweight, maintenance-free hubs. They combine the cost-effectiveness and proven performance characteristics of other bearings with the convenience of an integral mounting flange for mounting brake, disc, and wheel. Fischer Aktien-Gesellschaft (FAG) has been around for over 100 years and part of the automotive industry for more than 50 of them. Put your trust in proven manufacturing and components with FAG USA wheel bearing and hub assemblies, available for hundreds of applications.
( 11 )
$88.99
—
$92.99
Clearance
Moog wheel bearing and hub assemblies feature problem-solving innovations and include application-specific design enhancements. They are engineered to overcome problems and deliver smooth, reliable performance. Features and benefits of Moog wheel bearing and hub assemblies include: * Roll-form design ensures consistent and optimal preload * Precision-matched components; rigorously controlled manufacturing processes ensure exact matching of bearing raceways and rolling elements to consistently deliver superior performance and minimize noise and vibration * Moog abrasion-resistant ABS cord manufactured from a blended material that offers increased abrasion resistance and better protection from adverse conditions * For applications that require it, ABS molded shield and socket connections for even greater defense against contamination * Premium quad-lip seal design ensures maximum protection from contamination * Wheel studs have a protective coating that helps prevent rust and corrosion, enabling easier removal and proper torqueing of wheel nuts
( 702 )
$87.99
Premium parts without the premium price--GMB wheel bearing and hub assemblies should be your replacement choice. You can do the work yourself, but dealership prices will blow your budget. GMB parts deliver the form, fit, and function, as well as quality standards to meet and exceed your OE expectations. Their assemblies are precision-engineered with the right mix of ruggedness, temperature endurance, and materials to afford smooth, long-lasting operation on your vehicle. They are factory-sealed to eliminate contamination. GMB wheel bearing and hub assemblies provide quality and a perfect fit for your vehicle and your wallet.
( 25 )
$75.99
—
$95.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
