Availability
Advance Adapters NP205 transmission to transfer case couplers will allow you to match up your transmission to your transfer case.
( 7 )
$92.25
Timken transfer case bearings are manufactured with the highest quality steel to the highest quality standards. They're available in a wide range of designs and are custom-tailored to specific applications and operating conditions. The rugged design of these transfer case bearings provides you with proven performance.
Not Yet Reviewed
$82.99
Available in a choice of thicknesses, Advance Adapters Atlas transfer case spacers can be used to alleviate fitment issues caused by variations in transmission output shaft lengths. Many transmissions have positive "stick-outs" on their output shafts concerning the edge of the rear tail housing or adapter, which can cause a bottoming-out effect when installing an Atlas. Sometimes the output shaft can be trimmed back, but not always. You can relieve those "unable to trim" fitment issues with the Advance Adapters Atlas transfer case spacers designed for your application!
( 3 )
$98.56
Mopar Replacement offers a variety of transfer case components for specified model applications. Parts include drive chains, sprockets, bushings, shafts, retainers, oil filters, springs, seals, and more! Manufactured from high-quality materials, these genuine OE replacements are designed for the same fit and function as the originals.
( 3 )
$56.99
—
$78.99
Advance Adapters offers a variety of overdrive replacement components—including these T90 transfer case dual handle shifters. They're available for many Jeep and truck applications, from the 1940s and up.
( 1 )
$92.40
Pacific Performance Engineering transfer case pump upgrades cure the dreaded "pump rub." This occurs when the five positioning tabs holding the pump in place wear over time, causing the oil pump to come into contact with the housing itself. The result is a hole in your cover, leaking fluid, and the possibility of heavily damaging the transfer case. PPE transfer case pump upgrade kits consist of a new pump cover that offers a more secure method of mounting the pump, plus all the necessary gaskets. Order the kit recommended for your transfer case model.
( 4 )
$67.49
Replace your worn-out or damaged transfer case housing with one of these Dorman transfer case housings. They're made from durable OEM materials, built to factory specifications and tolerances to ensure a direct fit installation. The housings are available for a wide variety of transfer case models, so we're sure to have your application covered.
( 32 )
$91.95
—
$98.95
Low Range Off-Road's transfer case gasket and seal kits offer crucial benefits by preventing fluid leaks, which protects the transfer case from damage, ensures proper lubrication, and maintains the integrity of your vehicle's critical driveline components. These gasket and seal kits come with the necessary components for the transfer case overhaul to ensure that the gears and other internal parts receive the necessary lubrication to function correctly. By replacing old, brittle gaskets and seals, you can prevent costly future repairs, help extend the life of the transfer case, and ensure reliable performance on challenging off-road terrains like steep hills, rocks, and mud.
Not Yet Reviewed
$71.00
If you're looking for transfer case components like range forks, Motive Gear has what you need. They use only the highest quality materials to manufacture their equipment and have been providing aftermarket parts for over 65 years. When it comes to using transfer case components you can depend on time and time again, Motive gear has you covered.
( 17 )
$54.99
—
$99.99
Is it time for an overhaul? USA Standard Gear transfer case bearing kits provide the bearings and seals needed to refresh your transfer case. Perform your maintenance with transfer case bearing kits from USA Standard Gear.
( 25 )
$99.99
Fit your transfer case with new Alloy USA transfer case drive chains. These premium chains feature their round pin technology, offering greater articulation than the standard rocker pin design. They're built from high-tensile strength steel to endure peak loads under heavy operating conditions. Don't replace your chain--upgrade to Alloy USA transfer case drive chains.
( 3 )
$89.99
Summit Bucks
ACDelco GM Genuine Parts transfer case shift cables are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These shift cables connect the transfer case shifter lever to the transfer case mechanism, offering benefits like improved shifting action, and smoother, more controlled shifting experience by replacing problematic factory linkages. GM Genuine Parts are the true Original Equipment parts installed during the vehicle's production of or validated by General Motors.
Not Yet Reviewed
$74.99
Summit Bucks
ACDelco offers GM Genuine Parts transfer case rod assemblies for a wide range of trucks. Your transfer case transmits power from the transmission to the front and rear axles by means of driveshafts. It also synchronizes the difference between the rotation of the front and rear wheels. These replacement shift linkages are a key component in the assembly—designed, engineered, tested, and backed by General Motors. They are OE parts validated specifically for Chevrolet, Buick, GMC, and Cadillac vehicles. Order the transfer case rod assembly recommended for your application.
( 3 )
$66.99
From the time your vehicle starts moving until it stops, the parts in the transfer case are in action and under stress. When time, use, and stresses overcome these parts, replace them with Crown Automotive transfer case components. These components are OE-quality and designed to directly replace the originals. Transfer cases are constantly on the go, and when put into 4WD, they are downright abused. Rebuild or refresh your vehicle's case as needed with Crown Automotive transfer case components.
( 32 )
$53.99
—
$99.99
You'll need an Advanced Adapters Jeep crossmember mount kit when using one of their transfer case adapters. Unlike other company-designed mounts using a soft car type rubber cushion, Advanced mounts are designed with the weight of the transfer case in mind. These Jeep Wrangler crossmember mount kits support heavier loads and easily adapt to the existing skid plate location.
Not Yet Reviewed
$73.20
—
$76.56
Have you ever heard someone say, "I can't get this dang thing into 4-low"? Crown Automotive transfer case rebuild kits are available for most Jeep models with small parts through master overhaul designs. The parts in these kits are OE quality for excellent fit and reliability. Make certain to check the notes for the correct unit for your application. Transfer cases are strongly built for years of service, but occasionally need rebuilt. Crown Automotive transfer case rebuild kits have the parts you need to do the job right.
( 16 )
$76.99
Advance Adapters offers a variety of overdrive replacement components—including these T90 transfer case single handle shifters. They're available for many Jeep and truck applications, from the 1940s and up.
Not Yet Reviewed
$92.40
The problem with the stock transfer case shifter linkage is that it attaches your shifter to the body and is then attached to the transfer case. The patent-pending design of these Skyjacker transfer case shifter brackets eliminates the attachment point at the body, also eliminating geometric discrepancies from the stock location. Usually, this problem occurs with vehicles using a body lift, engine swap, transmission mount, or riser-type motor mounts. Engage your transfer case the correct way with one of these Skyjacker transfer case shifter brackets.
Not Yet Reviewed
$90.56
Advance Adapters power steering box mounting plates support your Saginaw steering box. These steel brackets provide stability and secure positioning of the box to the front driver side frame rail, and ample surface area for a complete perimeter weld. Installing your power steering box has never been easier, thanks to Advanced Adapters.
( 4 )
$89.51
Clearance
OMIX-ADA transfer case replacement components are manufactured by a community of enthusiasts dedicated to producing the finest in off-road solutions. OMIX-ADA products have been propelling 4WD vehicles down highways, back roads, and over the world's roughest terrain for about two decades. OMIX-ADA's team of engineers has developed, tested, and trail-ridden many of their products until they were perfected for you. So, when you're looking for transfer case replacement components, choose OMIX-ADA.
( 1 )
$53.99
—
$99.99
USA Standard Gear transfer case oil pumps help to lubricate the moving parts inside the case. When you need to replace your pump, they offer several choices that will provide the right fit for your application. USA Standard Gear transfer case oil pumps are a great option when quality is must, and price is a factor.
Not Yet Reviewed
$71.99
—
$77.99
Trail-Gear transfer case shifters are stock replacement shifter handles and base. Get back in gear faster with these shifters. They bolt in using your stock bolts and fit the top shift gear drive transfer cases on the vehicles noted in applications.
( 1 )
$99.99
Advance Adapters Saturn overdrive shifter kits contain the necessary components to complete your project. Their shift linkage universal shift kits allow various transmission options, and should be used when coupling a Saturn overdrive to a vehicle that is not equipped with the factory transmission. Their T14 3-speed Saturn shift kits, as well as their T90/T86 with single stick Dana 18, and T90 dual lever shifter kits work with their respective transmissions. Move your Saturn overdrive in gear with Advanced Adapters shifter kits.
Not Yet Reviewed
$92.40
Trail-Gear offers transfer case flanges that will allow Toyota owners to run a driveshaft in 1310 Series or 1350 Series, single joint, or double Cardan. Converting things over to the American-style components will make it easier to have a driveshaft made to fit from just about any driveshaft shop. Plus, if you are one of the people who are running big tires and dual cases, you can finally upgrade to the 1350 series and avoid breaking driveshafts. Trail-Gear transfer case flanges are made from forged SAE 5140 chromoly steel with drilled bolt patterns and are available in models with or without a dust shield.
Not Yet Reviewed
$59.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
