Availability
Showing In Stock Items. Show All 122 Items.
Remove old cam bearings and install new ones like a professional with our Summit Racing™ cam bearing installation tools. These kits contain an arbor with the drive mount, drive spools, spool stabilizers, and a drive cap. Even if it's your first time installing cam bearings, the instructions will walk you through the process with success.
( 194 )
$65.99
—
$81.99
Proform cam checker tools slide down into the lifter bore and sit atop the camshaft for the accurate measurement of lobe lift and base circle runout. The kits include a dial indicator, plus two followers—one for flat tappet or hydraulic cams and the other for roller cams. Order the tool recommended for your vehicle make.
( 37 )
$99.99
COMP Cams lobe indicator tools are designed to measure lobe lift and base circle runout with a dial indicator (sold separately). They slide down into the lifter bore and are held there firmly with a built-in O-ring. The tools include a follower for solid and hydraulic flat tappet cams and one for roller cams. Order the model designed for your engine application.
( 18 )
$102.95
Now you can have perfect timing for your 4.6/5.4L Ford with these Trick Flow® cam degree supplemental kits. These supplemental kits are additional tools that, when used with a Trick Flow® cam degree kit, make degreeing your cam much easier! These Trick Flow® cam degree supplemental kits include a steel plate for the magnetic base, an adjustable set-up lash adjuster, an extension for the dial indicator, and an Allen key.
( 15 )
$52.99
Summit Racing™ cam bearing alignment tools are simple, sturdy, and take your engine building skill to the next level. These tools bolt to the block and extend out from the #1 cam bearing journal 16 in. They hold the cam bearing knocker's alignment cone perfectly concentric and in-line, ensuring the front cam bearing goes in dead straight every time.
( 1 )
$89.99
These COMP Cams Chevrolet camshaft installation handles will make installing your new camshaft simple. They have a bolt-on handle that provides good leverage as well as a non-slip grip. These handles have an opening in the end for convenient storage of installation hardware.
Not Yet Reviewed
$83.95
COMP Cams camshaft lobe center marking tools are constructed of aluminum and include three sizes to cover all common lifter bore diameters. With these tools, the user marks the cam lobe with a type of marking fluid, installs the cam, and then places the tool in the lifter bore. Next, the cam is turned over to mark a line around the cam lobe. The cam is then removed, and the distance from the edge of the lobe is measured. Finally, shims are changed to achieve the correct lobe-to-lifter alignment. The kits include marking tools for .842 in., .875 in., and .904 in. lifter bore diameters. Each part has 1/4-20 threads for the bolt in the top.
Not Yet Reviewed
$78.95
These COMP Cams universal camshaft installation handles will make installing your new camshaft simple. They include a comfort cushion grip and five interchangeable adapters that fit most domestic engines. These handles provide excellent leverage and support for camshaft installation or removal.
Not Yet Reviewed
$96.95
COMP Cams offers a wide range of camshaft bearing tool replacement parts—including sleeves, bearing collets, driver bars and extensions, expander components, washers, cones, and more. There's no need to buy a completely new tool when all you need is a small replacement item. Maintain your tools for optimum performance and longevity with an assist from COMP Cams!
Not Yet Reviewed
$53.95
—
$85.95
Camshaft position is critical in today's engines. OTC offers dozens of camshaft alignment tools designed to help prevent the camshaft from moving. Many of these tools are necessary for performing valvetrain service. Order the model recommended for your engine application.
( 19 )
$54.99
—
$98.99
Tired of fumbling with a magnetic base and a dial indicator to measure cam lift? Measure lift the easy way with these cam checking fixtures from Proform. They include a fixture to hold the 0 to 1.000 in. dial indicator and 5 in. extension in the correct position over the lifters, ensuring proper geometry. These kits include a dial indicator, extension, and 7/16 in. and 1/2 in. adapters for use with any size engine.
( 4 )
$78.99
Proform universal camshaft checker tools slide down into the lifter bore and are adjusted until expanded securely. These kits include a dial indicator, plus two followers—one for flat tappet or hydraulic cams, and the other for roller cams. The tools are designed for lifter bores measuring 0.750 to 1.050.
( 5 )
$87.99
OTC camshaft retaining tools are oversized retaining plates that lock camshafts together at top dead center. These 3-plate kits are used to tighten both sets of cams to prevent them from turning while setting timing. The OTC camshaft retaining tools extra-large size prevents valve covers from being installed with the plates in place, protecting the engine. When you need to get the job done right the first time, use quality tools from OTC.
Not Yet Reviewed
$59.99
Melling engine camshaft gear installation tools are useful for both single-bolt and 3-bolt LS camshafts. Their dual-purpose design makes them a powerful aid when installing your camshaft sprocket or VVT actuator, and their heat-treated alloyed tool steel will stand the test of time. Don't work harder; work smarter with Melling engine camshaft gear installation tools.
Not Yet Reviewed
$98.99
ICT Billet camshaft installation handles are crafted from aluminum. They are offered in two lengths to make the install or removal of your camshaft easier. Get good leverage and a good grip with ICT Billet camshaft installation handles.
( 12 )
$58.99
CTA offers a wide range of professional automotive specialty tools including Chevy camshaft locking tool kits that are designed to lock the camshaft in its required timing position. These specialty tools ensure proper alignment of the camshaft and are compatible with GM 1.6L and 1.8L 16V engines. The kits are engineered for use with Aveo, Cruze, G3, 9-5, Alfa Romeo and Fiat vehicles from 2003-2012. These tools come packed in a blow-molded case.
Not Yet Reviewed
$69.33
Summit Racing™ cam phaser tools pressurize the phaser with air, allowing it to float for piston-to-valve clearance checks through the phaser's range. Available in several styles, select the appropriate to your application.
Not Yet Reviewed
$99.99
Lisle timing tools help ensure camshaft alignment during removal and installation of the timing chain. Make the job quick and easy using the right tools—Lisle timing tools will do just that!
( 7 )
$50.99
—
$59.99
Proform universal dial indicators can be used on a cam checking tool, a magnetic dial indicator base, or a deck bridge—for finding top dead center and other measurements. It's like adding several tools to your toolbox. Order the model that best suits your application needs.
( 5 )
$79.99
CTA's Ford timing tool kits can help simplify the process of timing belt or chain replacement, making it easier and faster for mechanics to perform the work. The primary function of these timing tool kits is to facilitate the safe and accurate replacement or adjustment of timing belts or chains. These timing tool kits are designed to engage with specific points on the camshaft, crankshaft, and other related components. Using the correct tools during the Ford vehicle's servicing can help to reduce risk of damage to the engine components, such as the crankshaft, camshaft, and timing belt or chain.
Not Yet Reviewed
$54.30
—
$57.16
OTC secondary timing chain holders are part of OTC cam tool sets—and are also offered individually. These special tools hold the camshaft secondary chains in place on the idler sprocket during timing chain installation. Service your timing chains with the help of OTC specialty tools.
( 3 )
$68.99
COMP Cams crankshaft sockets are the perfect addition to your engine-building toolbox. They accept 1/2 in. drive ratchets for versatility and easy engine rotation. They're precision-machined for an accurate fit over the crank snout, and their knurled retaining nut threads-on to sandwich a degree wheel in place. The nut can be loosened, while on the crank snout, so that the wheel can be turned independently of the engine when finding top dead center.
( 194 )
$59.95
—
$70.95
These seal cutters from Howards Cams allow the engine builder to modify your cylinder heads to fit the desired springs and valve stem seals to suit your application. A choice of sizes is available.
( 37 )
$86.99
—
$92.99
Want a precise way to measure installed height? Howards Cams valve spring height micrometers will assist you, making the job convenient and accurate. They offer several choices made from quality steel or aluminum for conventional and beehive-style springs. Choose the micrometer range to best suit your needs and your springs.
( 1 )
$62.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
