Availability
Showing In Stock Items. Show All 118 Items.
These SPC Performance wheel centering sleeves are designed to thread on the wheel studs of your heavy-duty truck. They are also designed to decrease tire vibration, reduce tire cupping, cut re-balancing costs, improve fuel mileage, and improve tire life. The sleeves are manufactured from durable steel and then zinc plated to resist corrosion. Make your ride smoother, quieter, safer, and more efficient with these SPC Performance wheel centering sleeves.
Not Yet Reviewed
$69.99
COMP Cams camshaft lobe center marking tools are constructed of aluminum and include three sizes to cover all common lifter bore diameters. With these tools, the user marks the cam lobe with a type of marking fluid, installs the cam, and then places the tool in the lifter bore. Next, the cam is turned over to mark a line around the cam lobe. The cam is then removed, and the distance from the edge of the lobe is measured. Finally, shims are changed to achieve the correct lobe-to-lifter alignment. The kits include marking tools for .842 in., .875 in., and .904 in. lifter bore diameters. Each part has 1/4-20 threads for the bolt in the top.
Not Yet Reviewed
$78.95
Keep it clean! Forget the old rags and put the paper towels back in the kitchen--SCA Tork Center Pull 2-ply A-Tork wiper towels just work better. They are soft and non-abrasive, providing protection for delicate surfaces. A-Tork wipers are also solvent-resistant and long-lasting, providing faster and more effective wiping. Why put up with smears, holes, and residue when you can have a clean, absorbent towel every time? These high-quality, 2-ply wipers are great for cleaning windhields and perfect for oil, grease, and dirt clean up.
( 8 )
$59.99
Rhodes Race Cars pinion centering plates provide an assist with narrowing your rear end. The plates are precision machined to locate your pinion centerline or use when checking offsets.
Not Yet Reviewed
$79.95
Chicago Brand combination square/dial protractor center gauge sets are designed to measure angles between surfaces to within 15 minutes of angle. They include a combination square with bubble level and a protractor with bubble level. These sets include a plastic case where all pieces are stored in protective foam.
Not Yet Reviewed
$80.99
Summit Bucks
Performance Tool punch and chisel sets are made from durable high-carbon steel with vinyl-covered shanks to absorb vibration. They also offer a combination of high-carbon steel and chrome vanadium steel sets. Sets are available with different punch and chisel combinations and quantities to suit your needs.
( 4 )
$66.99
For precision hole-making in sheet metal and frame materials up to 1/2 in. thick, choose Blair Rotabraoch cutter kits. These annular cutters are ideal for sheet metal fabrication or PDR and rust proofing access holes because the snap-in plugs fit perfectly. Blair Rotabroach cutter kits are designed to make clean, burr-free round holes with no deforming of stock or damage to the surrounding material. For your serious fabrication projects, use Blair Equipment.
( 13 )
$100.99
Classic Tube swivel handle tube benders feature a swivel handle that can be repositioned midway through a bend when both handles begin to meet. This allows easily fabricated bends up to 180 degrees—with better control and without the crossing of handles, typical of most other tube benders. The tools are made from durable steel, and are available for use on sizes ranging from 1/4 in. to 1/2 in. O.D. tubing—as well as on various materials like soft copper, steel, aluminum, stainless steel. Order the tool size that is best suited to help complete your fabrication project.
Not Yet Reviewed
$93.99
Allstar Performance carburetor stands are designed to simplify carb maintenance and to hold your carb up off of the workbench surface. These aluminum stands will work with the carb in either direction and fit a variety of carburetors.
( 4 )
$54.99
Are you honing a cylinder block? GBD Flex-Hone tools from BRM easily solve your deburring and surface finishing problems. These flexible honing tools from Brush Research offer a soft cutting action to produce a superior surface finish for increased performance. Silicon carbide globules are attached to a high-density nylon filament to create a unique construction that allows the abrasive globules to float, making these Flex-Hone tools self-centering and self-aligning to your cylinder bores. BRM has a variety of sizes and grits available to match your needs. Remove peaks and imperfections in your cylinder walls with American-made GBD Flex-Hone tools from BRM.
( 178 )
$72.99
—
$101.99
COMP Cams crankshaft sockets are the perfect addition to your engine-building toolbox. They accept 1/2 in. drive ratchets for versatility and easy engine rotation. They're precision-machined for an accurate fit over the crank snout, and their knurled retaining nut threads-on to sandwich a degree wheel in place. The nut can be loosened, while on the crank snout, so that the wheel can be turned independently of the engine when finding top dead center.
( 194 )
$55.95
—
$79.95
If you're building an engine or doing a cam swap, you'll want one of our Summit Racing™ crankshaft sockets in your toolbox. They're available for a variety of engine applications. Not only do these accept 1/2 in. drive ratchets or breaker bars for turning your engine over, but we've built in the provision to mount a cam degree wheel. Each crank socket features a durable black oxide finish and is precision machined from carbon steel for a tight fit over the crank snout. We've knurled the degree wheel retaining nut for a tool-free grip and quick adjustment when turning the degree wheel on the socket for finding top dead center.
( 5 )
$50.99
—
$69.99
Mr. Gasket rear main seal installation tools are special alignment tools that center the front or rear cover when it is installed, allowing an easier way to install the seal (by lightly tapping on the tool with a rubber mallet). The timing cover and rear cover on GM LS series engines don't have dowel pins to ensure correct alignment to the center line of the crankshaft--often leading to annoying leaks at the front damper seal and rear main seal. Mr. Gasket durable plastic rear main seal installation tools are your resolve to a leak-free installation.
( 15 )
$75.65
The Proform dial indicator stands will fit over any cylinder bore up to 4.500 in. They are designed to check piston-to-deck clearance, as well as the piston position at top dead center.
( 28 )
$52.99
Mr. Gasket LS timing cover alignment tools allow a safe, easy way to install the seal—by lightly tapping on the tool with soft rubber mallet. These specialized tools are designed to center the front or rear timing cover when it's installed to provide the correct alignment to the centerline of the crankshaft, and to help avoid seal leaks at the front or rear damper cover when installed. Mr. Gasket LS timing cover alignment tools are made of quality material, and are available in styles for use with or without a front seal in the timing cover.
( 16 )
$56.69
—
$62.95
LSM Racing speed handles enable you to change valve springs with ease! These specialty tools measure 6 in. long with two 7/16 in. hex positions, and are contoured for optimum thumb and finger positioning. The center location makes for quick spin on/off, while the outer location provides increased leverage.
( 1 )
$59.99
Summit Bucks
3M wide plastic sheeting is engineered with static cling, enabling one person to quickly and efficiently mask a vehicle. The clear, high-density film provides effective paint protection and is tear-resistant yet easy to cut around the work area. Specially treated for high paint adhesion, the sheeting effectively captures paint overspray to prevent contaminating the repair. Additional notes: * The film is easy to cut, so the required area can be removed with maximum speed and accuracy * Treated to ensure maximum overspray adhesion so flecks don't contaminate fresh paint * Center printing helps with alignment * Multiple sizes available * Dispenses vertically or horizontally from 3M Overspray Protective Sheeting Masker (P/N 06780, sold separately)
Not Yet Reviewed
$60.99
COMP Cams machined aluminum deck checkers incorporate magnets to hold itself firmly to the block for simple and accurate measurements. Mount a dial indicator (not included) in the center for deck height, or mount one indicator in each end to check piston rock.To calculate true compression ratio it's necessary to measure the distance between the deck surface of the block and the piston deck. Choose COMP Cams magnetic deck checkers to do the job.
( 1 )
$97.95
COMP Cams LS rocker trunnion installation and disassembly tools are nicely engineered pieces that simplify improving your rocker arms' stability. They're compatible with all stock LS rockers. The tools can be used with a bench vise, arbor press, and C-clamp, making them the most resourceful alternatives on the market. With precision-machined cylindrical steel construction, the tools are black oxide plated for corrosion resistance and increased lifespan. A centering die with an embedded magnet is included to ensure consistent bearing placement and one-handed assembly. COMP Cams engineers have helped make this task quick and easy for you.
( 3 )
$59.95
GearWrench magnetic swivel spark plug socket sets make tough jobs easy. These specialty sets contain 3/8 in. drive 6-point tools in different lengths. They all feature durable alloy steel construction with a full polished chrome finish that can be easily wiped clean and resists corrosion. GearWrench's swivel design provides better access to hard-to-reach spark plugs and the magnetic inserts hold on to the spark plugs making removal and installation easier. Work more efficiently with a GearWrench magnetic swivel spark plug socket set. Additional features and benefits: * Rubber insert protects spark plug and centers the socket * Designed for use with a 3/8 in. square drive tool * Off-corner loading design reduces fastener rounding * Serration depth is as deep as the fastener
( 1 )
$61.99
These COMP Cams universal dial indicators can be used on a cam checking tool, a magnetic dial indicator base, or a deck bridge, for finding top dead center and other measurements. It's like adding several tools to your toolbox.
( 11 )
$59.95
When working in difficult, tight spaces, Titan's 7-piece Auto-Flex universal joint socket sets are the best tools for the job. They're available in SAE or metric kits. The unique professional feature of Auto-Flex spring-loaded socket design helps gain access to fasteners in hard-to-reach areas. Auto-Flex joints spring back to center for ultimate control. Each piece is constructed of chrome-vanadium steel for exceptional strength and longevity. Additional details: * SAE sets include: 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, and 9/16 in. sockets * Metric sets include: 6, 7, 8, 10, 11, 12, and 13mm sockets * 360 degree rotation allows fit into tight spaces * Auto-Flex articulates under spring tension, providing semi-rigid directional control and accuracy; no more hanging or using tape to secure sockets into position * Rust-resistant mirror polish and red (SAE) or blue (metric) electrostatic finish * Sizes stamped for easy identification * 12-point SAE or metric socket set * Low-profile shallow socket heads * Storage rail included
Not Yet Reviewed
$52.99
—
$69.99
Top-quality Powerbuilt T-handle metric hex key wrench sets offer speed, strength, style, and precision. Each wrench is constructed of premium chrome vanadium steel for durability and a precise fit into metric hex head fasteners. Slide the T-handle to the center position, hold the free-spinning sleeve on the shaft, and tighten or loosen those hex head screws fast! Slide the T-handle to the end position and cinch those screws down. With their reach, grip, and convenience, Powerbuilt 8-piece T-handle metric hex key wrench sets will quickly become part of your go-to toolset! More product features include: * Up to 11 in. reach (10mm wrench) * Down to 4 1/2 in. reach (2mm wrench) * Every size between 2mm and 10mm offers more reach than L-type hex keys * Positive grip and precise fit from the friction-treated hex tips (less chance of rounding and cam-out) * Always keep within reach with the included storage rack * Speed sleeve and T-handle save time and effort
( 1 )
$65.99
Howards Cams Professional 2-sided degree wheels are not stamped, but are CNC-machined from billet aluminum for accuracy. These oversized degree wheels are precisely etched on both sides with 1 degree increments. They feature easy-to-read intake valve opens, intake valve closes, exhaust valve opens, and exhaust valve closes on one side, and an intake lobe center line on the other. The degree wheels are designed with a standard 1 in. center hole for use with most degree wheel sockets and they come with instructions and a laminated, reusable specification sheet.
( 7 )
$96.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
