Availability
Showing In Stock Items. Show All 25 Items.
Jet-Lube SS-30 Pure Copper Anti-Seize will literally “copper plate” mating and sliding surfaces to protect against seizure, galling, and heat freeze. This non-melting, non-volatile base grease contains a high content of micro-size copper flakes that prevent metal-to-metal contact. It also maintains lubrication qualities under wide variations of temperature, expansion, contraction, and cyclic loadings. The compound contains no lead or graphite, does not require mixing, and will not separate, settle out, harden, or dry out in storage. SS-30 is fortified with antioxidants and corrosion inhibitors—and has many uses: taps, lugs, wiping contacts, drum switches, slip rings, and more. Multiple container sizes are available. Additional Jet-Lube notes: * Environmentally-preferred anti-seize thread lubricant and conductive termination compound * Contains high concentration of copper flakes, required for heavy loads or compression * Controlled frictional characteristics allow surfaces of the nut and bolt to be torqued correctly * Assures full hydraulic efficiency, allowing metal surfaces to slide over each other without contact * Works as a similar and dissimilar metal between two metal surfaces to prevent seizing * Will not melt in high temperatures; improves conductivity and continuity
( 12 )
$69.99
Great for use in highly corrosive environments, Summit Racing™ copper anti-seize spray is three products in one! This special protective coating offers excellent adhesion as it lubricates, seals, and protects. The aerosol also helps to prevent galling, seizing, and galvanizing action. Bulk orders contain six cans.
( 1 )
$75.55
Clevite assembly lube is a "must" when you're rebuilding a motor. You should lube all of the bearings as a coating to prevent rust and engine failure for the initial start-up. A 1/3 oz. tube should be enough for an entire engine project.
( 56 )
$81.99
Red Line GL-5 gear oil has been engineered to provide the highest degree of protection and improvement of your differential efficiency. Formerly Lightweight gear oil, this new formula contains additional friction modifiers for suitability with clutch-type limited slip differentials, and for most, no additional friction modifiers would be required. This gear oil offers excellent lubrication, a high viscosity index, and the ability to lower operating temperatures, as well as exceeding API GL-5 specifications. Reduce friction for better performance--add the improved formula of Red Line GL-5 gear oil.
( 92 )
$92.84
3M Products black rubberized body undercoatings with corrosion protection and high-build capabilities provide excellent spray patterns and sound deadening qualities. Easy to apply these 3M Products body undercoatings will give your vehicle an excellent aesthetic appearance.
( 1 )
$52.99
Isky RevLube delivers unequaled protection for camshaft lobes, engine bearings, lifters, distributor drive gears, timing chains and gears, wrist-pins, rocker arms, valve stems and guides, and pushrod ends. It features a proprietary, heat-activated, extreme chemical that virtually eliminates bearing, camshaft, and gear wear. Isky RevLube does this with a special microscopic smoothing action that effectively redistributes loading over a wider surface area.
( 28 )
$64.99
Lucas semi-synthetic assembly lube is designed for mechanics and technicians to prelube bearings, cams, lifters, and valvetrain components. It contains zinc, moly, and other high-pressure additives, which offer maximum protection during engine break-in. Lucas semi-synthetic assembly lube is super-slick, easy to use, and will eliminate dry starts and prevent galling, seizing, and scuffing.
( 91 )
$68.99
—
$80.99
Lucas Extreme Duty Gun Oil is a special blend of oil and petroleum-extracted additives—producing a lubrication specially formulated for high volume, high heat, and friction firearms. It is designed for semi-auto rifles, shotguns, and pistols, as well as full auto firearms and suppressors. The oil offers superior burn-off resistance. Its polymeric film protects metal from rust and moisture—and dramatically reduces wear during all shooting conditions. Applying Lucas Extreme Duty Gun Oil to bores, bolt carriers, and gas pistons makes clean-up of powder residue, copper, and carbon fouling a much easier task. It neutralizes acids from fingerprints and resists drying for long-term storage use. Lucas Extreme Duty Gun Oil is great for lubrication on all high-heat, high-use firearms. It is sold in a variety of sizes and quantities.
( 2 )
$79.99
Baileigh Industrial band saw coolant is a flood coolant formulated to assist in most metal cutting and machining operations on ferrous, non-ferrous, and specialty alloys. The fluid is a non-chlorine, non-sulfur, non-phenol and non-nitrate based formula. Unlike other cutting fluids on the market, Baileigh Coolant is a non-petroleum based product blended with bio-degradable ingredients, making cleanup a breeze. The coolant is offered in 1- and 5-gallon sizes, with a 20:1 mixing ratio, and will last longer than others on the market.
Not Yet Reviewed
$53.55
Brush Research hone oil is specially formulated and designed for flex hones. Just apply a few squirts of this oil to your flex hone and you are ready to go. The oil contains: * Blend of honing and lapping oils * Lard oil to prevent the galling of aluminum * Moisture dispersant * Non-ionic surfactant wetting agent to ensure complete lubrication of the surface * Special additive to help keep metal cuttings and contaminants in suspension * Emulsided, anti-bacteria agent.
( 33 )
$63.99
Driven Racing Oil assembly grease is used by some of the top engine builders because it is a name they know and can trust. It provides proven extreme-pressure protection for heavily loaded parts during initial break-in. The unique formula completely dissolves in oil. Driven Racing Oil assembly grease can be used to prelube cams and lifters, and applying it to the piston ring land prevents micro welding during initial engine break-in. It can also be used on wrist pins, distributor gears, pushrods, and valve retainers.
( 54 )
$77.88
Lucas Penetrating Oil loosens rusted-on nuts and bolts, finding its way into the tiniest of crevasses between metal parts and lubricating them. This penetrating oil is fortified with powerful corrosion inhibitors and wetting agents that ensure protection to parts exposed to the elements. Evaporation is slow, leaving a tenacious film that fights water and corrosion. The aerosol can be used on bolts, hinges, sliding doors, bearings, bicycle chains, and a hundred other uses around the garage, shop, office, or home! Equipped with a locking pop-up tube and 360 degree applicator for precision application, Lucas Penetrating Oil goes where you want it to—and you never lose the applicator straw! Key features and benefits include: * A truly superior penetrant designed to dissolve corrosion and rust without drying * Provides a microscopic film that rust-proofs for up to a year indoors and outdoors * Aerosol can of penetrating oil can be used in any position—even upside down! * Excellent protection against water (even salt water) * Fortified with anti-seize agents * Low odor * Stops annoying squeaks on hinges, doors, etc.
( 2 )
$90.99
Melling Mell-Lube engine assembly and break-in fluid contains a special additive that plates wear surfaces to prevent scoring or galling during engine startup. Mell-Lube also contains corrosion inhibitors to prevent rust and pitting to new engines.
( 7 )
$78.99
Red Line applied their legendary ShockProof technology to this unique chain lubricant for road and off-road chain driven vehicles, including O-, X- and Z-ring chains. This chain lube by Red Line is a fully synthetic lubricant specially formulated to protect against rust and corrosion and doesn't attract dirt—and in most cases will help to make cleaning easy! Additional product features and benefits: * Industry-leading rust and corrosion prevention * Resists dirt, sand and grit adhesion * Minimal fling-off * Reduces wear to extend life of chain and sprocket * Protects even in muddy and wet conditions * Reduced friction for better power transfer
( 1 )
$96.73
Lucas air tool lubricants are designed to extend the life of your air tools. They fight rust and tarnish while coating the working parts with a cushion of waterproof lubrication for protection against extreme temperatures and blowouts. Order the product type, size, and quantity needed.
( 9 )
$95.69
Lucas gun oil is a special blend of oil and petroleum-extracted additives. Lucas gun oil can be used to waterproof, rustproof, or cut through rust that's already taken place. It is an excellent polishing compound for stainless steel and also resists fingerprints. Lucas gun oil was originally developed to maintain machine guns. It resists burning out or blowing out many times longer than conventional gun oils. Lucas gun oil can be applied heavily for rustproofing during long-term storage or applied lightly for immediate use.
( 15 )
$55.99
Initial startup is the most critical time in the life of any camshaft. COMP Cams Pro Cam lube can break in your camshafts properly. This lube must be spread generously on all lobes of the cam, the bottom of the lifters, and the distributor gear when installing a cam. This is the instant protection that you need to guard against any premature wear.
( 95 )
$76.95
Klein Tools Premium Synthetic Polymer Lubricant is an excellent all-purpose product for electrical and telecommunications and data applications. It's compatible with all types of cable, including polyethylene and semi-conducting jackets. This easy-to-apply gel clings instantly to the cable and allows for easy handling and application; superior ''cling-ability'' coats wires and conduit evenly. The clean, non-staining, non-toxic slow drying formula makes for safe and easy cleanup. Order the size needed for your applications.
Not Yet Reviewed
$79.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
