Availability
Summit Bucks
ACDelco GM Genuine Parts camshaft position sensors are a GM recommended replacement ideal for many vehicles on the road today. They monitor the rotational position of the camshaft(s). These sensors provide a signal to the engine control module, which compares the camshaft position with the crankshaft position to determine ignition and fuel injection timing. GM Genuine Parts camshaft position sensors have been manufactured to provide you with the performance, durability, and service life you expect from General Motors.
( 11 )
$65.99
Summit Bucks
ACDelco Gold camshaft position sensors are high-quality replacements ideal for many vehicles on the road today. They monitor the rotational position of the camshaft(s). These sensors provide a signal to the engine control module, which compares the camshaft position with the crankshaft position to determine ignition and fuel injection timing. Gold camshaft position sensors are manufactured to meet or exceed your expectations for fit and performance. Order the model recommended for your application.
Not Yet Reviewed
$62.99
Don't take chances with an old, questionable, or malfunctioning camshaft position sensor that can leave you stranded. Camshaft position sensors read the camshaft position and relay this information to your vehicle's ECM. This information is required for functions such as initiating injection on sequential injection engines, the trigger signal for the magnet valve on pump valve injection systems, and for cylinder-specific knock control. Standard Motor Products replacement cam position sensors are designed to exceed OEM specifications for accurate, reliable, maintenance-free operation. Trust your vehicle's engine management system needs to Standard Motor Products.
( 14 )
$75.97
On Sale
MSD puts their years of experience to work in making these top-notch iron distributor gears. Their high grade, ductile iron is micro polished for a smooth and scuff-free finish then Melonite QPC coated to reduce friction and initial wear. Excessive clearance causes timing fluctuation throughout the rpm range, resulting in lost horsepower, so MSD also designed these oversized gears for tighter mesh between the camshaft and distributor drive gears.
( 60 )
$59.25
$53.35
Summit Bucks
The average vehicle today has hundreds of wiring connectors. ACDelco connectors are available for everything needed, from antennas to trailer wiring, as well as an array of multi-purpose connectors to maintain the optimal operation of your vehicle. Choose GM-recommended replacement wiring connectors to ensure the same performance, durability, and service life you've come to expect from General Motors products.
( 37 )
$51.99
—
$87.99
Tired of setting your points, or hitting that magical point at higher RPM where they seem to float, costing you power and performance? It's time to pull out those ancient contacts and benefit from modern day, digital technology with FAST XR-i Points-to-Electronic Ignition Conversion Kits. The XR-i is a compact module that bolts directly in place of the breaker point assembly. It simply triggers from the factory cam lobe, making installation a breeze with only two wires to connect. The microcontroller of the module manages the signal and dwell time in the coil to produce a much higher output spark that will improve the performance and drivability of your classic as well. Another great feature is a built-in adjustable rev limiter to protect your engine in the event of driveline failure or a missed shift. Features include: * Increased spark output for improved drivability * Pinpoint accurate timing * Better fuel mileage * Faster and more reliable engine starts * Digital and maintenance free * Fully sealed from moisture and dirt * Adjustable rev limiter can be set from 4,000 to 8,000 RPM
( 24 )
$102.95
PRW bronze distributor gears are designed to minimize wear to your high performance camshaft. They are crafted from superior quality bronze aluminum and are precision CNC-machined to provide a smooth, consistent operation. PRW bronze distributor gears are easily replaced and include a roll pin.
Not Yet Reviewed
$53.85
—
$61.29
On Sale
These Extreme distributor caps from MSD are replacement covers designed to be installed on stock HEI distributor cams with no modifications.
( 8 )
$86.99
$78.25
For over 40 years, Cardone's innovative remanufacturing processes have provided a high-quality, lower-cost alternative to new replacement parts. It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot--Cardone is your source for the highest quality remanufactured parts. Through "reverse-engineering" failed parts, their engineers see where, and why, they failed. They reengineer their remanufactured products, where applicable, to reinforce failure-prone areas for longer-lasting performance. Cardone remanufactured parts cost up to 50 percent less than new--especially true with late-model, high-tech products. Cardone restores used auto parts back to their original fit and function, using only about 20 percent of the energy and raw material needed to build a new part; so you not only save money, but you also help save our planet. Features of Cardone remanufactured distributors include: * All electronic module components are 100 percent computer-tested to ensure full functionality * Automated test equipment verifies signal strength, correct polarity of wire harness, air gap, and crank reluctor tooth size, as well as ignition coil and pickup performance * Cardone uses the right gear hardness for the appropriate application: if the gear is too hard, it will damage the cam; if it's too soft, the gear itself will be damaged, potentially causing severe engine damage (many offshore manufacturers use only one gear hardness) * OE components with consistently high failure rates are 100 percent replaced or repaired to meet or exceed OE performance * Precise machining tolerances prevent oil leakage, poor timing, the setting of the "Check Engine" light, and premature failure
( 101 )
$59.99
—
$114.99
Mallory's steel distributor gears are precision-machined from alloy steel to exacting OE specifications. The gears have been heat-treated to ensure the proper hardness and deliver trouble-free service when used with the proper cam.
( 11 )
$79.85
Your vehicle's engine crankshaft position sensor reports the precise location of the crank to the Powertrain Control Module (PCM) to determine engine mechanical operation, as well as possible cylinder misfire. NTK camshaft position sensors are manufactured to operational performance standards to meet or exceed OE fit, form, and function, ensuring proper position and/or rotating speed of the engine's crankshaft. They undergo extreme testing conditions that include thermal shock, vibration, and OBD verification. They feature sealed connections to prevent leaks, environmental corrosion, and performance issues. O-rings and seals are included where applicable, and they are backed by a 3 year/36,000-mile warranty. Select the NTK crankshaft position sensor needed for your vehicle.
Not Yet Reviewed
$54.99
Pioneer distributor gears feature rugged bronze construction for use with billet steel cams. A critical link in your timing, Pioneer offers several gears in different shaft sizes to meet your application needs. Purchase a quality distributor gear to mesh with your cam gear from Pioneer.
Not Yet Reviewed
$75.99
Proform's Race HEI distributors are the real deal. They're designed to meet the high-performance demands of racing and keep on ticking. The distributors are built with 100 percent new parts, including the housing for guaranteed durability. They come in your choice of polished or unpolished aluminum housings, and four different cap colors. This distributors produce a 50,000 V spark through 7,500 rpm, for an enormous increase over OE HEIs. Also included are a 50 V coil, true spark alignment for instantaneous response, a high-performance curve, a premium cap with brass terminals, and a low-saturation ignition module.
( 82 )
$100.99
—
$108.99
On Sale
High-quality, direct-replacement Standard Motor wiring connectors help eliminate the need for a harness by letting you swap only the damaged connector for a cost-effective repair solution. The terminals feature high-grade materials like copper alloy, brass, and phosphor bronze. Together they provide the connectors with prolonged life and superior performance in harsh environments for each specific application. Standard Motor electrical connectors are 100 percent tested for the proper mechanical and electrical fit, form, and function for your vehicle.
( 139 )
$56.99
—
$85.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
