Availability
Showing In Stock Items. Show All 12 Items.
A worn oil pump drive assembly will probably trigger a check engine light and will make a funny squeaking sound that has been described as a laughing barrel of monkeys, however it is no laughing matter. The factory design poses a lack of lubrication, that could result in premature failure. Crown Automotive oil pump drive assemblies (OPDA) feature redesigned internals to eliminate the problems with the factory units, a seal under the upper bearing which caused the bearing to fail prematurely. Crown's OPDA has the seal relocated to above the upper bearing and an oil groove in the shaft which is designed to bring oil up to both the upper and lower bearings. Replace your Jeep's worn unit with the peace-of-mind offered with Crown oil pump drive assemblies.
( 22 )
$107.99
Tanks Inc. fuel pump safety switch and relay wiring kits are helpful when you're switching to an electric pump on a carbureted engine. Proper wiring is crucial to the performance and longevity of your fuel pump. Make sure that your fuel pump is receiving full voltage from the battery with this heavy-duty kit. It will provide a continuous supply of voltage to prevent drop-off that's common with OE wiring—which will protect your fuel pump from damage. Additionally these FPSSK kits feature an oil pressure safety switch to turn off the fuel pump in the event of oil pressure loss. Without a safety switch your fuel pump will continue to run, even if a fuel line comes loose or in the case of an accident. Once oil pressure is lost, this kit will turn off the power to the pump. Included with the Model FPSSK kit: * 50 amp relay with socket and pigtail * 30 amp circuit breaker * 15 ft. of 12-gauge fuel pump power wire * 5 ft. of 12-gauge relay power wire * 5 ft. of 14-gauge relay ground and trigger wire * 10 ft. of 16-gauge starter wire * 10 ft. of 16-gauge ignition wire * 1/8 in. NPT male to 1/8 in. NPT female brass tee fitting * 3-prong oil pressure safety switch * Includes terminals and mounting hardware
( 4 )
$69.99
Dorman engine oil accumulator solenoid valves are made from durable materials for reliable performance. Oil pump flow control valves often fail from varnish build-up, and the original manufacturer requires replacing the entire oil pump assembly. These Dorman oil pump flow control valves are quality replacements for a clogged or damaged original equipment control valve and are an excellent value compared to the original equipment part.
Not Yet Reviewed
$57.19
VDO oil pressure safety switches are designed to sense when oil pressure drops below a specific minimum pressure—and shut-off the fuel pump for precaution. The heavy-duty replacement switches are available in a variety of pressure ranges. Select the model best suited for your application.
Not Yet Reviewed
$54.99
high-quality MSD bronze distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5% nickel. This material creates high strength gear teeth which are less prone to wear when used with high volume oil pumps but does not harm the cam like steel or iron gears. With the proper cam and gear combination you'll be sure to have flawless, extended performance in the harshest conditions.
( 93 )
$89.35
—
$90.85
It's always a good idea to place a safety switch in the circuit when installing an electric fuel pump. Holley safety fuel pressure switches will ensure the electric pump will not work unless the engine has oil pressure. It will prevent the pump from running in a situation where the motor may stall with the ignition on. Wiring the switch through the starter solenoid circuit energizes the pump on engine start-up. After the engine is running, the switch continues to provide power to the pump as long as there is oil pressure to keep the switch turned on.
( 18 )
$53.49
Howards Cams distributor gears are available in a variety of materials, styles, and diameters—machined to exacting tolerances. They feature a high-strength tooth design that resists wear, even when used with high-pressure oil pumps. Order the model recommended for your year/make and engine application.
( 25 )
$52.99
—
$87.99
Don't ruin your new steel roller cam by running the wrong distributor gear. Install one of these quality bronze distributor gears from COMP Cams. A stock cast iron gear is not compatible with a steel camshaft and can cause serious damage. These bronze gears are machined from AMPCO-45 extruded aluminum bronze with 5 percent nickel. They feature a high-strength tooth design that resists wear, even when used with high-pressure oil pumps.
( 39 )
$74.95
—
$96.95
High-quality, direct-replacement Standard Motor wiring connectors help eliminate the need for a harness by letting you swap only the damaged connector for a cost-effective repair solution. The terminals feature high-grade materials like copper alloy, brass, and phosphor bronze. Together they provide the connectors with prolonged life and superior performance in harsh environments for each specific application. Standard Motor electrical connectors are 100 percent tested for the proper mechanical and electrical fit, form, and function for your vehicle.
( 139 )
$53.99
—
$57.99
When you need to make automotive repairs, ACDelco's selection of replacement wiring harness connectors offers you the best fit and function sockets and pigtails to do a variety of jobs. These quality-built, OE-like connectors and adapters provide you with efficient, less costly repair options for GM and American Motors vehicles. They're available in male or female, with an assortment of pins/cavities to fill your needs. Service your vehicle with a name you know and trust--ACDelco.
( 24 )
$50.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
