Availability
Showing In Stock Items. Show All 406 Items.
ACDelco GM Genuine Parts flex fuel sensors will tell you the composition of your fuel. How much ethanol is in your system? Well, you're about to find out. These sensors measure the ethanol/gasoline ratio of the fuel being used—and then send a signal to your ECM so adjustments can be made for optimum operation of your flexible fuel vehicle. Allow GM Genuine Parts flex fuel sensors to provide the right answers for you to regain reliable, efficient performance.
( 7 )
$61.99
—
$94.99
ACDelco GM Genuine Parts knock sensors are the GM recommended replacement for the vehicles original component. They monitor the engine for pinging or spark knock. The sensors create a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion. The engine control module then uses that signal to adjust the ignition timing and air/fuel mixture. These GM Genuine Parts knock sensors have been manufactured to fit your GM vehicle, providing you with the same performance, durability, and service life you have come to expect from General Motors.
( 104 )
$58.99
—
$63.99
ACDelco engine oil pressure indicator switches are quality replacement parts you can feel good about installing. They offer the fit, form, and function—along with value—you expect and want. ACDelco has a wide selection of components to optimize your GM vehicle's performance, as well as products to cover many other makes and models. Order the ACDelco oil pressure safety switch designed for your specific vehicle.
( 25 )
$56.99
—
$58.99
Is your check engine light on and vehicle running rough? Could be a failed knock sensor. Dorman knock sensor kits combine the necessary sensor and wiring harness that joins them for a complete repair in one package. Features include: * Plug-and-play installation--matches original wiring harness, requiring no cutting or splicing * Quality assured--benchmarked against original components for performance and quality * Excellent value--original equipment quality at significant cost savings
( 20 )
$61.99
—
$77.95
Engine knock is one of the most unwelcome problems to plague a vehicle. When your ignition timing becomes faulty, the results are felt unless corrected through a sensor. Chevrolet Performance knock sensor wiring harnesses should be used when replacing those key sensors, providing fresh OEM wiring and grommets. The harness units are available for over a hundred submodels from makers such as Chevrolet, GMC, Cadillac, Pontiac, Buick, and Hummer.
( 33 )
$74.99
ACDelco GM Genuine Parts mass airflow sensors are a key part of the engine management system, and they are GM-recommended replacements for your vehicle's original component. The MAF sensor measures the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject. This ensures the most efficient air/fuel mixture for the best fuel economy and power, while reducing harmful exhaust emissions. These original equipment mass air flow sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 22 )
$58.99
—
$88.99
ACDelco GM Genuine Parts oxygen (O2) sensors are special feedback sensors on your vehicle's exhaust system and are GM-recommended replacements for your vehicle's original components. They measure the proportion of oxygen in exhaust gases, then using the measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Choose the O2 sensor designed for your vehicle.
( 107 )
$50.99
—
$101.99
ACDelco GM Genuine Parts manifold absolute pressure sensors measure the intake manifold pressure, and are GM-recommended replacements for your vehicle's original component. The MAP sensor is a part of the fuel and engine management system. Its signal is used by the engine control module along with the throttle position sensor to calculate the amount of air entering the engine so that the correct amount of fuel is injected for optimum combustion. GM Genuine Parts manifold absolute pressure sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 23 )
$60.99
—
$81.99
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 102 )
$50.99
—
$109.99
FuelTech specializes in developing and manufacturing state of the art performance engine management systems, including their fuel pressure sensors. These replacement sensors are used to monitor fuel, oil, and wastegate pressure, as well as nitrous bottle and brake pressure (application dependent). Available options include black composite or stainless steel body construction and with or without a mating plug kit. FuelTech fuel pressure sensors are also available in several psi ratings, so choose the version best suited for your vehicle's style and application.
Not Yet Reviewed
$99.00
These AEM Electronics wideband UEGO sensors are used in AEM single channel UEGO systems. They may also work with other wideband UEGO controllers. Features include: * Much more accurate AFR readings than OEM sensors * Response time of less than 100 milliseconds * Measure from 11:1 AFR to atmospheric air * Latest Nernst cell/oxygen pump hybrid technology * Planar-configured zirconium dioxide sensor * Integrated heater element warms up in less than 20 seconds * PTFE insulators withstand temperatures of up to 1,400 degrees Fahrenheit (800 degrees Celsius) * Low current draw
( 22 )
$111.95
HalTech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These "Red" single-channel hall effect sensor components are made from high-quality materials and built to ensure proper fit and function. * Thread: M12 x 1.0 * Suits: Wheel Speed, Crank/Cam etc. * Includes: Matching set of Deutsch DTM 3 connectors (HT-031014)
( 1 )
$88.00
Summit Bucks
Delphi engine crankshaft position sensors exceed OE requirements and undergo certified electrical testing. They feature enhanced sensing functionality that delivers reduced emission, improved reliability, and superior drivability. Delphi engine crankshaft position sensors are not impacted by temperature changes and provide robust, long-lasting sensor protection. Choose Delphi for the OE replacement parts that your car was born with.
( 16 )
$51.99
—
$109.99
Summit Racing™ offers OEM GM flex fuel sensors for a wide range of applications, including many Chevrolet, GMC, Buick, and Cadillac models from 2011 and up. These replacement sensors measure the ethanol/gasoline ratio of the fuel being used—and then send a signal to your ECM so adjustments can be made for optimum operation of your flexible fuel vehicle. The sensors are made from factory materials and specs to ensure proper fit and performance. Ensure the fuel system efficiency you expect; order the model recommended for your vehicle.
Not Yet Reviewed
$79.99
On Sale
Holley coolant temperature sensors are designed to work with Holley's Pro-Jection fuel injection systems. They are available for both digital and analog systems and feature a Weatherpack connection that will easily plug into your Pro-Jection wiring harness.
( 19 )
$51.75
Designed for use with their WB-O2 Nano, Alcohol O2, WB-O2 Datalogger, and WB-O2 Slim products, FuelTech WB-O2 sensors measure the amount of oxygen in your vehicle's exhaust gases. Your engine's computer uses this data to help figure out the current air/fuel ratio. FuelTech also offers an alcohol model designed for high horsepower alcohol combinations, providing high accuracy and low AFR readings. Maintain fuel efficiency and emissions standards with the FuelTech WB-O2 sensor best suited for your application.
Not Yet Reviewed
$69.00
On Sale
Maintain optimum idle and rpm with Holley throttle position sensors. They are available for standard Holley carburetors and Holley's Pro-Jection. The sensors use quick-connect Weatherpack connectors, so installation is a snap.
( 14 )
$87.55
$78.80
—
$99.95
BBK oxygen sensor extension harness sets are direct plug-in designs to prevent the cutting and lengthening of your oxygen sensor wires. They are ideal for full-length headers and other specific applications.
( 45 )
$69.99
—
$89.99
Edelbrock Pro-Flo 3 EFI fuel pressure sensors are top-quality replacements for use with the Pro-Flo 3 systems. Affordable and easy to install, these plastic/steel sensors have 1/8 in.-27 NPT threads and include a -6 AN fuel pressure take-off adapter fitting. The sensors help to ensure that your fuel pressure readings are accurate. No laptop is required for installation.
( 1 )
$92.95
A worn oil pump drive assembly will probably trigger a check engine light and will make a funny squeaking sound that has been described as a laughing barrel of monkeys, however it is no laughing matter. The factory design poses a lack of lubrication, that could result in premature failure. Crown Automotive oil pump drive assemblies (OPDA) feature redesigned internals to eliminate the problems with the factory units, a seal under the upper bearing which caused the bearing to fail prematurely. Crown's OPDA has the seal relocated to above the upper bearing and an oil groove in the shaft which is designed to bring oil up to both the upper and lower bearings. Replace your Jeep's worn unit with the peace-of-mind offered with Crown oil pump drive assemblies.
( 21 )
$107.99
ACDelco Gold manifold absolute pressure sensors are high-quality replacements for many vehicles on the road today. MAP sensors are part of the fuel and engine management system, measuring the intake manifold pressure. Their signal is used by the engine control module, along with the throttle position sensor, to calculate the amount of air entering the engine--so that the correct amount of fuel is injected for optimum combustion. Order the model recommended for your application.
( 8 )
$72.99
—
$85.99
These AEM Electronics coolant temperature sensor kits allow you to monitor the temperature of your coolant. They include an aluminum weld-in bung, a connector plug with a flying lead, and a sensor.
( 6 )
$54.45
—
$70.79
To maintain your vehicle's top performance, you need the proper idle and rpm from your Holley-style 4-barrel carburetor. Innovate throttle position sensors will ensure that you are in the zone. Plus, installation is straightforward. Rely on Innovate to keep your vehicle running properly.
( 8 )
$116.99
ACDelco offers air charge temperature sensors for thousands of applications from the 1980s and up. These direct-fit OE replacements install easily and deliver factory-style performance. Maintaining the right temperature for the correct mix of air and fuel is crucial to engine efficiency. Order the sensor recommended for your vehicle.
( 20 )
$59.99
—
$65.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
