Availability
Showing In Stock Items. Show All 54 Items.
AEM Electronics No-Weld O2 sensor mounts enable users to mount a wideband O2 sensor without having to weld a sensor bung onto the exhaust. This is especially helpful for those that don't know how to weld or can't find someone that does. Simply drill a hole in the exhaust, install the gasket, and bolt the clamp. It's that easy!
( 23 )
$66.45
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 92 )
$50.99
—
$111.99
On Sale
Standard Motor ABS speed sensors supply information regarding wheel movement to the ABS computer. They're often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again. Replacement ABS speed sensors are available for hundreds of makes/models. Just match up your vehicle specs to order the correct unit.
( 16 )
$121.99
$50.39
—
$109.79
Clearance
Denso air/fuel ratio sensors (A/F sensors) were developed to measure air-to-fuel ratios under a wider range of driving conditions than oxygen sensors. A/F sensors, also known as wide-band oxygen sensors, send information to the engine management computer to make adjustments based on driving conditions. Their wider range and variable adjustments allow engines to burn fuel more efficiently and produce fewer emissions. As A/F sensor technology has evolved, Denso has been there every step of the way. From the first thimble-type sensors to today's heated, quick-response sensors required to meet ever more stringent emissions regulations, Denso has supplied OEMs with quality components and continues to innovate. Denso helped to develop this important technology and you can rely on Denso First Time Fit A/F sensors. Features and benefits of Denso air/fuel ratio sensors include: * Tarnish-proof platinum electrode provides longer life and maintains accuracy * Quick-response planar zirconia element quickly detects oxygen concentration * Measures air/fuel ratios from approximately 12:1 to 19:1 * Increased performance by mapping air/fuel ratios throughout the RPM range * Lower emissions by optimizing the air/fuel mixture * Reduces fuel consumption and maximizes catalytic converter life * First Time Fit design delivers the right part the first time
( 22 )
$161.99
$53.99
—
$101.99
Ride height sensors can wear out and are vulnerable to damage from road debris, accidents, water, and salt intrusion. By replacing faulty sensors, you can prevent further damage to your vehicle's air suspension system. Arnott suspension ride height sensors are manufactured from quality components to restore the vehicle's ability to respond to road conditions, and increase comfort and dynamic capability for a premium ride. Their aftermarket ride height sensors level your vehicle by measuring the varying distances between the road and the vehicles chassis. The sensors provide your vehicle's Electronic Control Unit (ECU) with the information and send a signal to the air suspension compressor to increase or decrease the air in the air struts appropriately. Choose the sensor designed for your vehicle.
Not Yet Reviewed
$64.78
—
$95.74
ICT Billet knock sensor brackets allow LS Gen III knock sensors to be retained and relocated from the valley pan area to the bottom edge of the engine block. Machined from aerospace-grade billet aluminum, the brackets are compatible with all Gen III harnesses and knock sensors. Mounting hardware is included.
( 2 )
$87.99
Holley EFI sensor blocks provide a clean and safe solution for mounting multiple 1/8 in. NPT pressure sensors. Rigidly mounting pressure transducers to your engine is never a good idea. Holley EFI sensor blocks are a better idea. Features include: * Compatible with all transducers that utilize 1/8 in. NPT male threads and 7/8 in. or smaller body/hex diameter * Four independent ports, each with three inlets/outlets, allows for the remote mounting of transducers which eliminates inaccuracies due to vibration and heat * Improve engine bay organization by mounting transducers all in one easy to reach location * Four mounting holes designed for the use of 5/16 in. socket head cap hardware for secure and robust mounting * Crafted from military grade 2024 aluminum * Optimized design weighing only 0.50 lbs. * Anodized black for durability and laser-etched with the Holley EFI logo
( 3 )
$65.85
If you have a modern engine swap, chances are you need to find a way to attach or mount the mass air sensor. VaraRam mass airflow sensor housings are ideal for mounting your MAF sensors. They are constructed from billet aluminum for durability and are made to fit the vehicles specified in the applications. They will improve airflow and horsepower and look good under the hood.
( 1 )
$104.99
On Sale
Aeromotive VaporWorx fuel pressure sensor datalogging kits are designed to monitor and record the fuel pressure in a vehicle's fuel system, allowing users to precisely analyze and adjust fuel pump speed based on real-time pressure readings, ensuring optimal fuel delivery and performance, particularly in high-performance applications where fuel demand can fluctuate significantly. Essentially, these kits provide valuable data to fine-tune a fuel system for efficiency and power delivery by monitoring pressure changes under various driving conditions. Key points about VaporWorx fuel pressure sensor datalogging kits: * Perfect for datalogging systems or as a replacement kit for your VaporWorx PWM kit (sold separately) * Precise fuel pressure monitoring—the kit includes a dedicated fuel pressure sensor that accurately measures the pressure in the fuel rail, providing detailed data for analysis * Pump speed adjustment—by reading the fuel pressure data, the VaporWorx controller can dynamically adjust the fuel pump speed to maintain the desired fuel pressure at all times, optimizing fuel delivery based on engine demands * Datalogging capability—the system allows users to record fuel pressure data over time, enabling them to identify potential issues like pressure drops during acceleration or inconsistencies under different driving conditions * Performance enhancement—by precisely regulating fuel pressure, users can optimize engine performance, improve throttle response, and potentially increase horsepower * Troubleshooting Tool—datalogging data can assist in diagnosing problems related to fuel pressure regulation, such as a failing fuel pump or a faulty fuel pressure regulator Note: Some applications, depending on where the sensor is mounted, may require a 10-20uf capacitor to be installed across the output and ground. The 5-volt supply not included.
Not Yet Reviewed
$79.55
$71.60
Dorman crankshaft position sensors are direct-fit replacements that are easy to install and offer long, reliable service. They are constructed from high-quality plastic with metal-reinforced mounting points to protect against failure. Dorman sensors accurately measure crankshaft location to detect misfires and control engine timing. They are manufactured to strict engineering quality standards and are available for a wide variety of applications.
( 2 )
$60.95
These Standard Motor Products replacement crankshaft position sensors are designed to send a signal to the ECM to determine engine rpm, crankshaft position, and engine misfire. They consist of a permanent magnet, yoke, and coil. The Standard Motor Products replacement crankshaft position sensors are mounted close to a tooth gear. As each tooth moves by the sensor, AC voltage pulses are inducted into the coil. Each tooth produces a pulse; as the gear rotates faster, there are more pulses produced. The ECM then determines the speed at which the component is revolving, based on the number of pulses. Therefore, the number of pulses in one second is the signal frequency. If you're experiencing crankshaft position sensor failure, try one of these Standard Motor Products replacement crankshaft position sensors.
( 26 )
$52.99
—
$104.99
Beck/Arnley ABS speed sensors supply information regarding wheel speed to the ABS computer. They are often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, then the computer modulates the anti-lock feature until the speeds are equal again.
Not Yet Reviewed
$52.99
—
$103.99
Clearance
Dorman ABS speed sensors are designed to supply information regarding wheel speed to the ABS computer. One of the most common omissions in maintaining a modern anti-lock brake system (ABS) is checking out the speed sensors. They are often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again.
( 37 )
$104.99
$56.50
Canton Racing Accusump electric pressure control valve kits are available for discharge/refill in different psi ranges to suit your needs. These valves have the convenience of an electric valve for remote-mounted units and the rapid refill rate of a manual valve as required in racing. The electric pressure control valving will only allow the Accusump to discharge oil when the engine's oil pressure drops below a predetermined level, and only refills when the pressure rises above that level. Each kit comes with a regulator, electric valve, wire, toggle switch, pipe nipple, terminals, and instructions.
( 9 )
$98.00
Don't let a winch installation rob you of your vehicle's camera functionality. Rough Country front camera relocation brackets move your camera from the grille to the winch fairlead, ensuring clear visibility during all your adventures, plus a bonus. Crafted from robust 11-gauge material and custom-bent to perfectly fit RC's high-mount kit with safari bar, they are built to last. The camera clamp bracket, made from durable 14-gauge material, adds extra strength. With a sleek, flat black powdercoat finish, they not only perform but look great too. And here's the bonus--you can keep an eye on your winch cable entering the winch drum. Style and added functionality—Rough Country front camera relocation brackets.
Not Yet Reviewed
$69.95
Clearance
Astemo offers throttle position sensors a wide range of domestic and import vehicles. These stock replacements are built to OEM specifications for performance and longevity. A throttle position sensor is used to measure how open the throttle valve is—and therefore controls the amount of air which can flow into the engine's intake manifold. Astemo's quality control and attention to detail make their parts the go-to choice for many car manufacturers. Order the TPS model recommended for your application.
Not Yet Reviewed
$55.99
—
$56.99
On Sale
Replace your worn or malfunctioning vehicle speed sensor with one of these Standard Motor Products vehicle speed sensors. Depending upon a vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early-model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points. Don't take chances with your vehicle's performance--insist on Standard Motor Products quality vehicle speed sensors.
( 15 )
$61.99
—
$109.99
$55.79
—
$98.99
Ride height sensors determine vehicle height. They can wear out and are vulnerable to damage from road debris, accidents, water, and salt intrusion. Arnott aftermarket ride height sensors are designed to level your vehicle by measuring the varying distances between the road and the vehicle's chassis. The ECU is provided with this information and sends a signal to the air suspension compressor to increase or decrease the air in the air struts appropriately. Arnott ride height sensors are manufactured with quality components, lab tested up to 1 million cycles, and offer plug-and-play installation to restore your vehicle's ability to respond to road conditions, ensuring comfort and capability for a premium ride. Available for numerous applications, select the sensor designed for your vehicle.
Not Yet Reviewed
$53.91
—
$103.95
Dorman ride height sensors are designed to replace damaged, faulty, or missing ride height sensors. They give input to your suspension systems, changing the way they react to various road conditions or loads. They're positioned behind the tire to deliver ride control and suspension leveling. Get a smoother ride with these easy-to-install OE parts--avoiding the wear and tear of the most difficult road conditions.
( 2 )
$100.95
Clearance
Aisin ride height sensors are vehicle specific, featuring OE form, fit, and function. They are built using Aisin's original equipment technology and know-how to ensure top-notch product quality and reliability for every application. Each one is ready to install with no modifications required. Additional features of Aisin ride height sensors include: * Assemblies include sensor and linkage arm (adjustable or non-adjustable, depending on application) * Sends continuous electric signals to the computer * Maintains correct headlight alignment and suspension height (varies with make and model)
Not Yet Reviewed
$118.99
$68.50
Standard Motor Products ride height sensors are direct-fit OE replacements that ensure ease of installation. These sensors are made of high-quality materials to withstand extreme conditions, and they undergo extensive testing to ensure reliability. Order the model recommended for your vehicle application.
Not Yet Reviewed
$89.99
URO Parts offers ride height sensors for a variety of applications, including many Land Rovers. These suspension components are ideal replacements for worn or faulty originals, and will help restore normal shifting operation of the transmission. The sensors are calibrated with OE specification to accurately measure vehicle speed. Guaranteed to fit, the ride height sensors carry a 24-month unlimited mileage warranty. Order the model recommended for your vehicle.
Not Yet Reviewed
$50.99
—
$72.99
Do you feel every bump on a rough road? You will if you're driving with worn-out suspension leveling sensors. New ride height sensors from Delphi give input to your suspension systems, changing the way they react to various road conditions or load. They're positioned behind the tire to deliver ride control and suspension leveling. Get a smoother ride with these easy-to-install OE parts--avoiding the wear and tear of the most difficult road conditions.
Not Yet Reviewed
$82.99
—
$86.99
Maintain proper ride height while driving using one of these Delphi ride height sensors. They are made from OEM quality materials to ensure reliability and a direct-fit installation.
( 1 )
$96.99
—
$113.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
