Availability
Showing In Stock Items. Show All 50 Items.
FAST fluid temperature sensor and converter kits provide an easy and economical way to measure fluid temperature and convert to a universal 0 to 5 V output, perfect for use with EFI systems and dataloggers. Designed around the widely available GM-style intake fluid temperature sensors, these FAST kits are ideal when trying to measure engine oil, coolant, transmission, intercooler/heat exchanger fluids, and rear differential temperatures. FAST fluid temperature sensor and converter kits come complete with fluid temperature sensor and pre-terminated sensor module, and installation is simple, with only three wires to connect.
( 1 )
$87.95
FuelTech hall effect converters are designed to read an analog VR signal and transform init to a digital signal (Hall). This is recommended when using VR speed sensors (found in most ABS systems) or when using VR fuel flow meters. (Note: Not compatible with differential hall-effect or magneto-resistive sensors.)
Not Yet Reviewed
$89.00
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 93 )
$50.99
—
$111.99
Are you experiencing hard starts, stalling issues, rough idle, or hearing a slight pinging within your engine? Don't panic. It may be related to a bad throttle position sensor. Delphi throttle position sensors are designed to sense throttle movement and change of position. They also regulate various engine and vehicle operations, including spark timing, air and fuel ratio, torque converter lockup, air conditioning, and idle speeds. With that said, throttle position sensors are an important component, and if your existing sensor seems to have gone bad, just swap it out for a new one from Delphi.
( 13 )
$52.99
—
$123.99
Standard Motor accelerator pedal sensors indicate the position of the accelerator pedal by converting pedal movement and position into electrical signals. These sensors are direct replacements for the factory components.
( 49 )
$55.99
—
$106.99
Rostra vehicle speed sensors are speed signal generators that will help you convert to the signal type that you need. The GM sensors include a wiring harness, a GM cable adapter, and a sensor adapter. The universal sensors include a wiring harness and a magnetic pickup to provide a usable speed sense signal.
( 35 )
$58.99
—
$102.99
Avoid conductivity issues that can cause your engine to run poorly and be difficult to diagnose. ICT Billet MAF/IAT breakout harnesses are assembled with OEM tooling and use OEM harness wire colors, as well as OEM Delphi connector, lock, seals, and terminals. ICT Billet MAF/IAT harnesses are offer in different styles for retaining MAF in factory position while breaking (relocating) IAT sensor to different location, converting small 3-wire MAF to larger 5-wire MAF/IAT sensor, or when you need more length when relocating intake/air filter to opposite side of engine from factory harness and IAT is relocated external to the MAF sensor. Choose the one that meets your "breaking" needs.
Not Yet Reviewed
$65.99
Replace your worn or malfunctioning vehicle speed sensor with one of these Standard Motor Products vehicle speed sensors. Depending upon a vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early-model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points. Don't take chances with your vehicle's performance--insist on Standard Motor Products quality vehicle speed sensors.
( 15 )
$54.99
—
$103.99
Are you having problems with your electronic throttle? If so, then pick up one of these Dorman accelerator pedal position sensors. They are designed to indicate the position of the accelerator pedal by converting the accelerator pedal movement into two electrical signals so that the computer can provide the proper change in throttle position. Available for a variety of vehicles, the Dorman accelerator pedal position sensors are sure to solve any of your electronic throttle issues.
( 16 )
$51.95
—
$90.50
Denso air/fuel ratio sensors (A/F sensors) were developed to measure air-to-fuel ratios under a wider range of driving conditions than oxygen sensors. A/F sensors, also known as wide-band oxygen sensors, send information to the engine management computer to make adjustments based on driving conditions. Their wider range and variable adjustments allow engines to burn fuel more efficiently and produce fewer emissions. As A/F sensor technology has evolved, Denso has been there every step of the way. From the first thimble-type sensors to today's heated, quick-response sensors required to meet ever more stringent emissions regulations, Denso has supplied OEMs with quality components and continues to innovate. Denso helped to develop this important technology and you can rely on Denso First Time Fit A/F sensors. Features and benefits of Denso air/fuel ratio sensors include: * Tarnish-proof platinum electrode provides longer life and maintains accuracy * Quick-response planar zirconia element quickly detects oxygen concentration * Measures air/fuel ratios from approximately 12:1 to 19:1 * Increased performance by mapping air/fuel ratios throughout the RPM range * Lower emissions by optimizing the air/fuel mixture * Reduces fuel consumption and maximizes catalytic converter life * First Time Fit design delivers the right part the first time
( 22 )
$53.99
—
$103.99
Worn-out sensors can cause engine performance problems and premature catalytic converter damage. Bosch premium universal type oxygen sensors with OE SmartLink produce precise output in proportion to the air/fuel ratio, due to a sophisticated sensing element. These premium sensors also use a patented connector system, which allows them to be added to an existing OE sensor harness. Keeping a properly functioning oxygen sensor in your vehicle saves money on fuel cost and is good for the environment, too!
( 13 )
$54.99
—
$63.99
Replace your worn or malfunctioning vehicle speed sensor with one of these Beck/Arnley vehicle speed sensors. Depending upon your vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air-control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points.
( 1 )
$52.99
—
$98.99
Twin Power crankshaft position sensors provide an exact OEM fit and function. Being stuck on the side the road is not fun. These sensors are endurance tested to 60,000 miles to ensure sensor longevity, as well as 100 tested to OEM specifications and assembled with OEM-style connectors. Your motorcycle's crankshaft position sensor is one of the most important parts—without it, your bike will not run. Trust Twin Power to keep your Harley® on the road with their sensors.
( 2 )
$51.36
Summit Bucks
ACDelco GM Genuine Parts oxygen (O2) sensors are special feedback sensors on your vehicle's exhaust system and are GM-recommended replacements for your vehicle's original components. They measure the proportion of oxygen in exhaust gases, then using the measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Choose the O2 sensor designed for your vehicle.
( 109 )
$65.99
Mopar Replacement oxygen sensors offer high-quality, along with an original equipment fit and function to keep your favorite Chrysler, Dodge, or Jeep rolling down any road you choose to travel. When you need to replace and you want the proper fit, correct calibration, and reliable operation choose genuine Mopar Replacement oxygen sensors. Order the model designed for your specific vehicle application.
( 1 )
$69.99
—
$81.99
Clearance
Astemo offers mass air flow sensors for countless cars, trucks, and vans. These stock replacements are built to OEM specifications for performance and longevity. MAF sensors play a fundamental role in your vehicle, measuring the amount of air entering the internal combustion engine. Astemo's quality control and attention to detail make their parts the go-to choice for many car manufacturers. Order the mass air flow sensor recommended for your application.
( 5 )
$82.99
—
$89.99
Clearance
Mopar Replacement exhaust temperature sensors are direct-fit OEM replacements that will provide the matching fit and function of your originals. Mopar sensors are manufactured from quality materials, and are the smart choice in servicing and maintaining the best performance of your Chrysler, Dodge, or Jeep vehicle. Order the sensor model for your application needs.
Not Yet Reviewed
$96.99
$55.50
Clearance
Standard Motor battery current and voltage sensors measure the temperature of the battery, regulating voltage to the vehicle charging system to function properly at all times. Standard Motor ensures these sensors are direct-fit, by testing every unit before it is packaged. These sensors are unrivalled for fit, form, function, and quality. Replace your worn or faulty battery current and voltage sensor with one from Standard Motor.
Not Yet Reviewed
$97.99
$60.50
Clearance
Mopar Replacement ABS speed sensors are genuine OE-replacements. That means your Chrysler, Dodge, Plymouth, Jeep, and even some Mitsubishi models will receive the perfect part to repair and/or restore performance and safety, just as it should be. These sensors are engineered from high-quality materials to provide reliable, long service with the right fit, function, and value. Make the operation of your anti-lock brake system safe again; order the Mopar ABS speed sensor designed for your vehicle application.
( 3 )
$106.99
$51.50
Delphi ABS wheel speed sensors meet your OE requirements and those of your wallet. Delphi speed sensors provide accurate, clean signal input to your vehicle's ECM. Designed for the maximum signal to noise ratio, these ABS wheel speed sensors are not impacted by temperature changes and provide robust, long-lasting sensor protection. When it's time to replace, choose Delphi ABS wheel speed sensors for reliability and superior drivability.
( 1 )
$61.99
—
$100.99
Clearance
Holstein Parts ABS sensor line has superior coverage for domestic and import applications. Anti-lock Braking, ABS Systems allows the driver to maintain control of the car in an emergency braking situation. The ABS system relies on sensors to monitor the wheel's speed and communicate with the ABS computer to ensure ideal performance. The data from the ABS sensor then allows the computer to balance the speed of each wheel to prevent the brakes from locking up and avoiding dangerous skidding situations. Holstein Parts focuses on using only the highest quality materials for their products, all parts are manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part.
( 3 )
$73.99
—
$94.99
Hella ABS speed sensors maintain safe, smooth operation for your anti-lock braking system, traction control, and stability control. Hella sensors are high-quality replacements with availability for many European manufacturers. Wheel speed sensor faults can cause other safety systems to fail. Keep your braking performance optimal with Hella ABS speed sensors.
( 1 )
$66.99
—
$105.99
These Delphi camshaft position sensors feature a digital output design for maximum signal to noise ratio. They are not impacted by temperature changes and provide long-lasting sensor protection. These Delphi camshaft position sensors are also manufactured to meet or exceed OE requirements to ensure quality and long-lasting durability.
( 13 )
$101.99
Keep your vehicle safe with EBC disc brake pad electronic wear sensors. These units help keep you aware of how much material is left on your brake pads and indicate when you need to replace them. The EBC sensors are available for a variety of submodels from BMW and Audi, in particular.
Not Yet Reviewed
$61.35
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
