Availability
Showing In Stock Items. Show All 72 Items.
Don't let a winch installation rob you of your vehicle's camera functionality. Rough Country front camera relocation brackets move your camera from the grille to the winch fairlead, ensuring clear visibility during all your adventures, plus a bonus. Crafted from robust 11-gauge material and custom-bent to perfectly fit RC's high-mount kit with safari bar, they are built to last. The camera clamp bracket, made from durable 14-gauge material, adds extra strength. With a sleek, flat black powdercoat finish, they not only perform but look great too. And here's the bonus--you can keep an eye on your winch cable entering the winch drum. Style and added functionality—Rough Country front camera relocation brackets.
Not Yet Reviewed
$69.95
BBK oxygen sensor extension harness sets are direct plug-in designs to prevent the cutting and lengthening of your oxygen sensor wires. They are ideal for full-length headers and other specific applications.
( 45 )
$69.99
—
$89.99
Summit Bucks
ACDelco GM Genuine Parts oxygen (O2) sensors are special feedback sensors on your vehicle's exhaust system and are GM-recommended replacements for your vehicle's original components. They measure the proportion of oxygen in exhaust gases, then using the measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Choose the O2 sensor designed for your vehicle.
( 108 )
$58.99
—
$82.99
NTK is the world's leading supplier of OEM oxygen sensors. They're individually tested to ensure the highest level of quality and reliability—designed to continuously detect the composition of exhaust gases. As the output from the sensors changes, the ECU instructs the fuel mixing system to alter the mixture. This ensures that the air/fuel mix is always correct and promotes efficiency. A new NTK oxygen sensor can help lower emissions, improve fuel mileage and engine efficiency, and extend catalyst life. These components meet or exceed OE specs and are equipped with waterproof, factory-fitted connectors to ensure a perfect fit every time. Order the model recommended for your vehicle.
( 81 )
$50.99
—
$65.99
Clearance
Motorcraft ABS wheel speed sensors are designed for use with electronic systems in Ford and Lincoln vehicles. They are responsible for relaying the wheel speed to the ECU so that it can tell the ABS system how much pressure to safely apply. Maintain your vehicle with the proper fit and function Motorcraft parts, the preferred choice of Ford.
( 2 )
$50.99
—
$96.99
Does some custom exhaust work require you to relocate your oxygen sensors? Then Kooks Headers oxygen sensor harnesses are just for you. They're available in several different lengths and for various applications. These harnesses are also assembled from high-quality components to meet or exceed OEM specifications. For an easy, hassle-free installation on your next exhaust project, choose Kooks oxygen sensor harnesses.
( 7 )
$94.50
—
$108.00
On Sale
Standard Motor ABS speed sensors supply information regarding wheel movement to the ABS computer. They're often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again. Replacement ABS speed sensors are available for hundreds of makes/models. Just match up your vehicle specs to order the correct unit.
( 16 )
$121.99
$50.39
—
$109.79
Chevrolet Performance oxygen sensors will keep your engine operating at its peak. A malfunctioning sensor can rob your vehicle's engine of power and efficiency. These replacement O2 sensors provide the proper fit and function for many makes and models. Order the model recommended for your vehicle and engine application.
Not Yet Reviewed
$70.99
—
$78.99
Summit Bucks
Why tempt fate? Replace faulty measuring devices ASAP with ACDelco ABS wheel speed sensors—to restore proper braking function and performance. Hundreds of models are available for fitment on vehicles from the 1980s and up. These recommended replacements ensure the same durability, quality performance, and service life you expect from General Motors parts.
( 9 )
$57.99
—
$90.99
Clearance
PowerStop has a reputation for precision and adherence to the strictest OEM standards. Extending those standards, PowerStop's electronic brake wear sensors are designed to meet the same form, fit, and function as the original OEM part. Brake wear sensors wear down with the pads and illuminate the brake pad wear indicator light/warning. When that happens, it's time to replace the brake pads as well as the sensors. PowerStop electronic brake wear sensors are designed to withstand high-temperatures, assure excellent electrode conductivity, and they will continue to work after thousands of miles, providing the safety and performance drivers count on.
( 5 )
$94.26
$61.50
—
$98.75
Ride height sensors determine vehicle height. They can wear out and are vulnerable to damage from road debris, accidents, water, and salt intrusion. Arnott aftermarket ride height sensors are designed to level your vehicle by measuring the varying distances between the road and the vehicle's chassis. The ECU is provided with this information and sends a signal to the air suspension compressor to increase or decrease the air in the air struts appropriately. Arnott ride height sensors are manufactured with quality components, lab tested up to 1 million cycles, and offer plug-and-play installation to restore your vehicle's ability to respond to road conditions, ensuring comfort and capability for a premium ride. Available for numerous applications, select the sensor designed for your vehicle.
Not Yet Reviewed
$53.91
—
$103.95
Clearance
Dorman impact sensors signal the vehicle's onboard computer system during sudden, extreme deceleration--helping the computer to determine whether or not airbag deployment is necessary. They are plug-and-play for easy, economical installation, with no reprogramming necessary. The sensors are direct replacements for a proper fit; they also turn off the airbag light and help restore your airbag system to proper operation.
Not Yet Reviewed
$149.99
$98.50
Clearance
Beck/Arnley ABS speed sensors supply information regarding wheel speed to the ABS computer. They are often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, then the computer modulates the anti-lock feature until the speeds are equal again.
Not Yet Reviewed
$138.99
$52.99
—
$93.99
Ride height sensors can wear out and are vulnerable to damage from road debris, accidents, water, and salt intrusion. By replacing faulty sensors, you can prevent further damage to your vehicle's air suspension system. Arnott suspension ride height sensors are manufactured from quality components to restore the vehicle's ability to respond to road conditions, and increase comfort and dynamic capability for a premium ride. Their aftermarket ride height sensors level your vehicle by measuring the varying distances between the road and the vehicles chassis. The sensors provide your vehicle's Electronic Control Unit (ECU) with the information and send a signal to the air suspension compressor to increase or decrease the air in the air struts appropriately. Choose the sensor designed for your vehicle.
Not Yet Reviewed
$70.27
—
$93.66
Clearance
Dorman ABS speed sensors are designed to supply information regarding wheel speed to the ABS computer. One of the most common omissions in maintaining a modern anti-lock brake system (ABS) is checking out the speed sensors. They are often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again.
( 37 )
$104.99
$56.50
Clearance
Mopar Replacement ABS speed sensors are genuine OE-replacements. That means your Chrysler, Dodge, Plymouth, Jeep, and even some Mitsubishi models will receive the perfect part to repair and/or restore performance and safety, just as it should be. These sensors are engineered from high-quality materials to provide reliable, long service with the right fit, function, and value. Make the operation of your anti-lock brake system safe again; order the Mopar ABS speed sensor designed for your vehicle application.
( 3 )
$116.99
$51.50
—
$139.99
Delphi ABS wheel speed sensors meet your OE requirements and those of your wallet. Delphi speed sensors provide accurate, clean signal input to your vehicle's ECM. Designed for the maximum signal to noise ratio, these ABS wheel speed sensors are not impacted by temperature changes and provide robust, long-lasting sensor protection. When it's time to replace, choose Delphi ABS wheel speed sensors for reliability and superior drivability.
( 1 )
$50.99
—
$145.99
Hella ABS speed sensors maintain safe, smooth operation for your anti-lock braking system, traction control, and stability control. Hella sensors are high-quality replacements with availability for many European manufacturers. Wheel speed sensor faults can cause other safety systems to fail. Keep your braking performance optimal with Hella ABS speed sensors.
( 1 )
$50.99
—
$112.99
Do you feel every bump on a rough road? You will if you're driving with worn-out suspension leveling sensors. New ride height sensors from Delphi give input to your suspension systems, changing the way they react to various road conditions or load. They're positioned behind the tire to deliver ride control and suspension leveling. Get a smoother ride with these easy-to-install OE parts--avoiding the wear and tear of the most difficult road conditions.
Not Yet Reviewed
$86.99
Maintain proper ride height while driving using one of these Delphi ride height sensors. They are made from OEM quality materials to ensure reliability and a direct-fit installation.
( 1 )
$96.99
—
$113.99
Brembo offers brake pad wear sensors for a wide range of vehicles—including many BMW, Audi, Porsche, Volkswagen, Mercedes-Benz, Mini Cooper, Jaguar, and Land Rover models. These stock replacements are made from original materials and designed to factory specs to ensure proper fitment and performance. Order the sensors recommended for your application.
( 1 )
$57.53
On Sale
Standard Motor Products ABS wheel speed sensor wiring harnesses are critical for getting information from your ABS sensor to your vehicle's computer and keeping your antilock braking system properly functioning. These quality replacement harnesses meet or exceed OE specifications, ensuring peak performance and service life.
( 3 )
$58.99
$53.09
—
$107.99
Caspers Electronics knock sensor wiring harnesses with LS1 cam sensor adapter allow the cam sensor used on the front of an LS2/3/4/7/9 engine to be plugged into the LS1 cam sensor connector located at the back of the intake manifold. They are ideal for LS2/3/4/7/9 motor conversions and are compatible with the PCM harness in LS1/LS6 vehicles. Additionally, they include a knock sensor extension, which allows the single-wire LS1 knock sensors located on top of the LS1 manifold to be relocated on both sides of the LS2-series block, using the factory LS1 engine harness. The Caspers Electronics knock sensor wiring harnesses with LS1 cam sensor adapter have the correct length and thermal protection required when routing near hot engine components.
( 5 )
$55.99
APR boost tap adapter kits are modular systems that plug directly into the intake manifold and make several configuration options available. APR modular boost tap and PCV bypass systems feature a tap used for referencing boost or vacuum from the manifold, a cap (if this feature is unneeded), a T-junction to allow for multiple boost and vacuum references, and a "no buzz" restrictor pill for proper manual boost gauge operation. The systems also include a threaded PCV plug, allowing the PCV system to operate as intended by the OEM, as well as blocked off, if needed, for a specific PCV or catch-can setup. Temporarily installing the threaded plug also allows for quick diagnosis of the PCV valve for boost leaks. APR's innovative and modular design ensures operation with all boost, vacuum, and PCV system combinations, leaving no compatibility worries for future configurations. Key features: * Provides manifold pressure and vacuum * Supports multiple connections * Blocks off front PCV is so desired * Includes all accessories * Plug-and-play install
Not Yet Reviewed
$79.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
