Availability
Showing In Stock Items. Show All 72 Items.
Are you running rich or lean? Innovate oxygen sensors will monitor and tell you just what the facts are. These precision sensors collect and feed the data you need to aid in restoring accurate gauging your fuel mixture. They offer replacement Bosch LSU 4.2 and 4.9 sensors for their digital A/F ratio meter and digital wideband gauges. Plus, Innovate wideband systems allow the sensor to be recalibrated for the ultimate in accuracy, maximum performance, and safety!
( 25 )
$101.99
—
$109.99
HalTech offers a variety of data acquisition components, including this High Output IGN-1A Inductive Coil with Built-In Ignition Module. It includes matching plug and pins.
Not Yet Reviewed
$88.00
These accessories from Innovate are designed to work with your Innovate air/fuel ratio monitor. They are perfect for upgrading your current monitor or for replacing worn-out components.
( 42 )
$84.99
—
$99.99
If you're unable to use a thermocouple-style assembly due to limited space availability, Racepak liquid temperature sensors are a great alternate choice. These replacement sensors are for use with Vnet modules and require the adapter harness.
( 2 )
$89.95
All Racepak V-Net systems must be equipped with a tee cable to install the two terminator caps (one male and one female) necessary for the operation of the system. Just like the ends on the V-Net cables, all V-Net tee cables and terminator caps are blue. Racepak interface modules can also use tee cables, but they are not required for the system to operate properly. Instead, they allow you to create a branch in the system. Black interface tee cables and dust caps are used for the purposes their names indicate. Racepak gauge tee cables are used to connect Intelli-Gauges to a V-Net cable. After the first gauge, each subsequent gauge is connected with a gauge-to-gauge jumper cable.
( 1 )
$69.95
—
$99.95
Racepak serial communications cables are used to transmit or download information from the V300/V300SD/V500 data recorders and your computer. There are a number of options available, such as serial to USB port, so you can find the cable that's right for your application. Load up Racepak, keep your data handy, and start your engines.
( 6 )
$74.95
—
$99.95
Racepak V-Net 5-pin cables are designed to connect multiple sensors to tee cables—which are then connected to the V-Net port and Racepak dash. They're manufactured from high-quality wire and feature pre-terminated Weather Pack connectors for a quick installation and easy removal.
( 2 )
$84.95
—
$104.95
Innovate LSU 4.9 sensor cables provide correct connection to your wideband. Innovate's latest generation of widebands are multi-sensor compatible. The LSU 4.9 sensor cable connectors are 1 in. or 25mm at their widest point and are identified by the "4.9" molded on the plastic. They are available in three lengths. Innovate LSU 4.9 sensor cables will work with their LM-2 and LC-2 wideband meters and their MTX-L, SCG-1, DLG-1, PSB-1, and PSN-1 gauges.
( 2 )
$82.99
Knowledge is power and AiM Sports vehicle sensors will provide plenty of knowledge. Each sensor is designed to monitor a critical area of your race car, helping you tune your ride for better performance and greater consistency. Each sensor talks to an AiM sports data logger and display, allowing you to see the information in real time or download it later to analyze it for the next heat.
( 2 )
$77.99
—
$90.99
AiM Sports MyChron5 battery chargers power up the rechargeable lithium batteries in your lap timers and data loggers for kart racing. Plug into a USB port and you're ready to charge your MyChron5 battery!
Not Yet Reviewed
$60.99
On Sale
Holley EFI CAN adapter harnesses are available in several options. Offered are male to female harnesses in several lengths for Racepak and other external CAN devices, harnesses that adapt 2-pin Holley main harness CAN connectors to newer 4-pin CAN devices, and kits that directly connect Racepak Vnet/Holley to either the J1A (HP and Dominator ECUs) or J3 (Dominator ECU only) connectors. Create secure connections with genuine Holley EFI CAN adapter harnesses.
Not Yet Reviewed
$65.85
$59.27
Innovate PL-1 pocket data loggers are the latest in their motorsports lineup of products to allow for easy data logging of your MTS (Modular Tuning System)-compatible product. Whether you have an LC-2 and SSI-4, MTX gauges, or any other combination of Innovate Motorsports MTS devices, they integrate seamlessly to record all of the data from the connected devices. Includes: * 2GB SD memory card * SD memory card reader, USB to PC * Power cable, 12 V * LogWorks 3.0 software, available for download (CD not included) * MTS patch cable, locking 4-pin to 4-pin, for newer devices like the MTX gauges or LC-2 * MTS patch cable, 2.5mm to 4-pin, needed for LC-1, SSI-4, TC-4, and LMA-3
( 3 )
$109.99
HalTech offers a variety of data acquisition components, including this 2.5mm black anodized aluminum bracket with integrated visor and laser-etched logo. The mounting bracket is designed for the HalTech iC-7 display dash.
Not Yet Reviewed
$82.00
Attach your Racepak or Haltech IQ3 display dash with ease—using one of the Racepak IQ3 mount brackets. These sleek looking dash brackets allow custom mounting within your gauge cluster area. The aluminum mount brackets feature a center hole cutout with pre-drilled holes to facilitate installation. They're available in a natural aluminum or anodized black finish.
( 2 )
$69.95
FuelTech exposed tip thermocouples offer faster and more accurate temperature reading for exhaust gases. The exposed tip gives the sensor a lower thermal inertia, allowing for faster reading during temperature variation. FuelTech exposed tip thermocouples are available in several wire lengths, and each includes a weld-in bung for installation and an extra ferrule for compatibility with other EGT bung brands. Choose the one you prefer. Additional notes: * Temperature range: 32 degrees F to 2,200 degrees F * The K-Type EGT probe is compatible with the EGT-8 CAN and ETM-1 conditioners
Not Yet Reviewed
$89.00
HalTech offers a wide range of data acquisition components, including this 12-Position Rotary Trim Module (Boost/Fuel/LGN, etc.). It includes two position decals and a matching set of Deutsch DTM 3 connectors (HT-031014).
Not Yet Reviewed
$82.00
FuelTech's remote pressure sensor mounting blocks are the perfect solution to mount your pressure sensors in one common place. Each port is individually connected from top-to-bottom, allowing you to run up to four separate pressure sensors on a small lightweight billet mounting block away from vibration and for easier access. (Sensors are sold separately.)
( 1 )
$79.00
Edge Products offers simple, inexpensive, non-expandable EGT sensors for your diesel rig. If you're not going to be adding optional accessories and you just want the basics and good quality, Edge EGT sensors are for you. Simply, Edge exhaust gas temperature sensors allow you to accurately monitor critical temperatures and prevent engine damage. Make sure that the added power of your rig isn't creating excessive heat with Edge EGT sensors.
( 4 )
$57.79
Summit Racing™ offers numerous data acquisition components help you identify, measure, and log a variety of sensor outputs for your engine, driveline, and suspension. Whether for replacement or upgrade, these parts are made from top-quality materials and factory-type specifications to ensure a proper fit and optimum performance. Technology advancements in the auto industry supply an increasing amount of information to drivers in order to direct maintenance decisions and facilitate a smooth, efficient ride. Order the part needed to collect the data for your vehicle.
Not Yet Reviewed
$99.99
Edge EAS temperature sensors are supplied with connectors to plug directly into the Edge universal sensor input system. With these sensors for the Expandable Sensory System (EAS) you will be able to monitor several temperatures, like transmission, differential/axle oil, engine coolant, air intake, pre and post intercooler and more. Using the Edge EAS sensors with their universal sensor input and CS/CTS monitors will allow you to view critical temperatures on state-of-the-art products.
Not Yet Reviewed
$75.75
Connect your sensors, cameras, and data loggers with AiM Sports patch cables. These replacement cables will help extend their reach and make your wiring setup easier. AiM offers several styles to fit their loggers, including thermocouple extensions and dual thermocouple Y-cables. Dozens of cable types are available for automotive, drag race, Jr. drag race, street performance, and kart applications. Keep the data flowing efficiently and accurately through AiM Sports patch cables.
( 2 )
$54.99
—
$59.99
AiM Sports Solo 2 DL cables are offer in several styles, each specially designed to get your GPS log-timer connected for performance. Keep the lines of communication open with AiM external power cables. Cables to choose from: * CAN/K-Line/external power cable with OBDII connector * CAN/RS232 external power cable * RPM/external power cable (if your vehicle has no ECU)—connects Solo 2 to an rpm wave to synchronize rpm to the position on the track
( 1 )
$56.99
Racepak USM connector cables are designed to allow easy connection of Racepak Universal Sensor Modules to a variety of data acquisition components. They are available to connect fluid temperature, rpm, shock travel, ride height, infra-red temperature, 0 to 5 V, and TI-style pressure sensors.
Not Yet Reviewed
$65.89
Innovate's TC-4 Plus is ideal for applications such as dynamometers, data acquisition systems, or standalone ECUs. For accurate measurement, pair it with Innovate EGT probes. Available individually for replacement or as an added accessory, the probes include a weld-in stainless steel fitting and bung with 6 ft. wire. They will work with the TC-4 Plus, LMA-3, DL-32, and TC-4 (Innovate products that include a Thermocouple channel).
Not Yet Reviewed
$109.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
