Availability
Showing In Stock Items. Show All 45 Items.
Moroso electric float switches allow single-point detection of coolant high/low levels through a sidewall of your tanks using "normally open" or "normally closed" contacts. Wire these 30-watt-rated switches into your OEM low-coolant-level circuits or use them as switches for aftermarket coolant-level lights. They include a bung so that the level sensor option can be added by drilling and welding to the coolant tank. The combination of highly skilled craftsmen and highly accurate machinery guarantees that the tradition of quality continues with each and every one of Moroso's products.
( 1 )
$57.99
MSD relay modules are designed to be easily installed in most automotive electrical systems where a high amperage relay is needed. These relay modules are perfect use with high amperage electric fuel pumps and high CFM electric cooling fans. The relay housing comes with a labeled lid that snaps into place providing a clean installation and protecting the main power stud and triggers from contamination or accidental contact. MSD offers these relay modules with different channel outputs, select the model that's designed to meet your application needs. Features include: * 7 V to 20 V supply to fit a wide variety of applications * Independent 40A outputs, to supply power to most aftermarket fuel pumps and electric fans * Configurable single-wire activation with Ground (-) input or 12 V (+) input, with removal of the Tie-Bar * Removable cover for easy accessibility * Low-profile JCASE fuses provide ample protection in case of a short * LED status indicators, show you which channel is triggered at a glance
( 12 )
$99.95
Holley trans-brake input protection modules allow for an ECU input to be safely connected directly to the 12 V side of the trans-brake solenoid. They are designed to protect the ECU input from damaging fly-back voltage, which occurs when the trans-brake is released. Not using one of them will cause damage to the ECU over time.
( 4 )
$59.25
ACDelco GM Genuine Parts HVAC blower control modules manage the temperature, air distribution, blower fan, and air conditioning functions in automatic climate control systems, and they are GM-recommended replacements for your vehicle's original component. These original equipment HVAC control modules have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 4 )
$72.99
Clearance
BD Diesel boost module push-button switch kits are designed specifically for use with the company's throttle sensitivity booster for on-the-fly adjustments. These kits offer six additional modes: stock, low +50 percent mode, medium +75 percent mode, high +100 percent mode, ludicrous +400 percent mode, and valet mode.
( 3 )
$70.95
$59.50
Diode Dynamics SmartTap CF18 LED flasher modules add unique, programmable functions to your turn signals. They're compatible with any vehicle using a CF18 flasher. With plug-and-play installation, it offers a lot more than your average relay: an embedded microcontroller is loaded with exclusive software, which adds new functionality to your vehicle! You can program features just the way you'd like, with the help of an included programming guide. Add more safety and smart functions to your ride with Diode Dynamics SmartTap CF18 LED replacement flasher modules. Features and items: * Tap-to-signal: a single tap will cause your turn signal to blink a specific number of times that you program in—ideal for lane changes * Unique built-in hazard functions: includes strobe, slo-mo, and wig-wag to help your vehicle stand out; can be applied separately, together, or with strobe for up to 8 unique functions * Arrival/departure modes: when your vehicle is locked or unlocked, your turn signals will steadily glow for 10 to 90 seconds for better visibility; can also be disabled (not compatible with all vehicles) * SmartTap flasher relay * Programming guide
( 2 )
$99.95
AutoLoc one-touch up and down window units are fully compatible with domestic, import, and aftermarket power window systems. Simply tap the switch once and the window will travel all the way up or down. There is no need for any aftermarket switches; AutoLoc one-touch up and down window units work with the OEM power window switches. They can also be used with alarm systems and keyless entry kits. Order the switch or module style preferred for your vehicle.
( 4 )
$58.80
ICT Billet offers wiring harness extensions for use with many Chevrolet LS-based engine applications from 1997 and up. These connectors are available in a variety of lengths, with 2, 3, 4, 8, or 10 pins. They can help with installing camshaft sensors, alternators, throttle pedals, throttle bodies, temperature sensors, MAP sensors, EVAP solenoids, and more. Each harness extension is made from factory-style materials and specs to ensure proper connection and optimum performance.
( 2 )
$58.99
Fleece Performance offers wiring pigtails and replacement connectors for a wide range of vehicles—including many Dodge, Chevrolet, GMC, Ford, and Ram models from the 1990s and up. These replacement parts are ideal for sensors, starter solenoids, cooling fans, and other components under the hood. Fully automated in-house wire cutting and terminal crimping ensure you get the highest quality connectors and pigtails to get your car or truck back on the road quickly. Order the model that corresponds to your electrical application.
( 2 )
$56.99
High-quality, direct-replacement Standard Motor wiring connectors help eliminate the need for a harness by letting you swap only the damaged connector for a cost-effective repair solution. The terminals feature high-grade materials like copper alloy, brass, and phosphor bronze. Together they provide the connectors with prolonged life and superior performance in harsh environments for each specific application. Standard Motor electrical connectors are 100 percent tested for the proper mechanical and electrical fit, form, and function for your vehicle.
( 139 )
$52.99
—
$80.99
When you need to replace or repair electrical connectors on your vehicle, Standard Motor pigtails are a great choice. Standard offers pigtails for everything from your alternator and manifold air temperature sensor … to headlight switches and window motors. These factory-type replacement assemblies are available for thousands of specific applications. Choose the Standard Motor parts needed for your make/model.
( 3 )
$51.99
—
$78.99
If you're in need of a replacement relay, Dorman relays are a perfect choice. They are constructed of high-quality materials for long-lasting durability and made to exceed OEM specifications for accurate and maintenance-free operation. Dorman offers a comprehensive line of relay connectors for a wide range of applications.
( 8 )
$58.99
—
$103.99
These XFI ignition adapter harnesses and connector kits are used with the XFI units that have the latest in flash microprocessor technology to deliver a significant increase in processing speed. They are able to process, analyze, and adjust four times faster than previous EFI systems. These kits enable you to keep your software current without ever removing the XFI from your vehicle.
( 1 )
$92.95
American Autowire Factory-Fit wiring harnesses are OE replacements and are manufactured according to the original General Motors specifications. Each part number is fully assembled, taped, and ready to install upon arrival. They are best suited for a restoration project with minimal to no modification from the factory specification. American Autowire Factory-Fit harnesses are offered for individual dash, engine, forward lamp, console, rear body, and more, but the best thing is you can purchase a wiring harness as you need it or can afford it, making them great for those on a budget. Plus, since they are OEM-styled the fit is perfect and the installation time is less.
( 26 )
$69.35
—
$100.70
NOS solid-state relays address the need for reliable, rugged, and affordable control of various electrical equipment on your race car. Originally designed to control the high-current switching loads of nitrous solenoids, these relays can also be used to control other high-current devices—such as electric water pumps, trans-brakes, and line locks. NOS relays feature an ultra-low activation/release time of less than 16 microseconds to ensure no delays in reaction times. The solid-state relays can also be Pulse Width Modulated (PWM) with no minimum-duty cycle at frequencies up to 1000hz. NOS solid state relays feature: * 5-20 V DC operation * Rugged solid-state circuitry * Easy 3-wire connection * Included terminated pigtail * Included extra contacts for build-your-own wiring * Ultra-fast activation, under 16 microseconds * Pulse Width Modulation (PWM) compatible * PWM 0-100 percent * Up to 1000hz frequency * Vibration-resistant * Maximum continuous current = 40 amps * Maximum switching current = 20 amps
( 14 )
$92.45
If your vehicle is equipped with LED lighted gauges, then you may also want to hook yourself up with these LED lighted gauge dimmers from New Vintage USA! Since LED gauges are inherently brighter than stock dash lights, the LED brightness can be hard on the eyes. These compact modules allow for isolated dimming of LED lighted gauges separately from your vehicle's OEM dash and can support up to seven gauge instruments.
( 1 )
$54.95
Painless Performance Jeep CJ Duraspark II ignition wiring harnesses are designed to easily convert the old points-style components in your electronic ignition systems to a modern Duraspark II system. A wiring harness is, first and foremost, engineering; Painless engineering assures you that your headlights shine, the blinkers blink, and the engine starts. These harnesses allow for the factory location of your module and coil, and are recommended if you are also replacing the chassis harness. You'll find a harness compatible with Jeep CJ models as far back as the mid-1960s.
( 7 )
$99.99
Want to make the switch from the original Sniper EFI to Sniper 2 and don't want to rewire your system? This harness is designed to do exactly that! The Holley Sniper adapter harness is a plug-and-play solution to connect your existing Sniper 1 wiring harness to a Sniper 2 throttle body! It can be used with any Sniper 2 system that is not equipped with a power distribution module (PDM). Simply remove your Sniper EFI throttle body from the intake manifold, unplug all of the connectors, and plug the Sniper EFI 2 adapter harness into your existing main harness. Cycle your ignition key, run a fresh wizard on the display of your choosing, and enjoy the benefits of Sniper EFI 2. Make the switch to Sniper 2 in minutes! Sniper EFI 2 is a high performance electronic fuel injection system designed for a wide range of engines and horsepower goals. It provides improved engine performance, better fuel efficiency, and easier starting, making it the perfect upgrade for any enthusiast looking to take their ride to the next level. With its easy installation and advanced technology, the Sniper EFI 2 is the ultimate fuel injection system for any conventional V8 engine. Features: * Update your Sniper 1 to Sniper 2 in less than an hour: One-step, plug-and-play upgrade from your existing Sniper EFI install to a Sniper 2 throttle body * Eliminates the need to rewire your existing Sniper EFI installation * The wiring harness included with the Sniper 2 kit will not be used. This adapter is intended to be used with the original Sniper EFI wiring harness and new Sniper 2 EFI throttle body Sniper 2 EFI benefits: * (NEW) Next Generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires)  * (NEW) "Hidden Harness" wiring harnesses exit from the rear of throttle body for a clean appearance  * (NEW) Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V) and 1x tach output  * (NEW) Next Generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection 
( 2 )
$56.09
MSD solid state relays clean up your wiring. These modules take the place of four standard relays and eliminate unsightly wiring. Four independent channels can be activated using either power or ground, and each channel is capable of handling up to 20 amps of continuous current—providing up to 80 amps of power. MSD solid state relays provide a compact and clean design to make your wiring project a breeze.
( 23 )
$58.15
2018+ Dodge/Chrysler/Jeep vehicles all have a new security module that renders the OBD2 port inoperable for all aftermarket devices and tuners. Z Automotive double bypass kits overcome that obstacle by installing a secondary OBD2 port in the trunk, bypassing the security module. The quick plug-and-play installation takes under 5 minutes—with no wire splicing or cutting. The double bypass harnesses will also work on 2011-17 Chargers/300s and 2015-17 Challengers, for those who want to relocate their Z Automotive devices to the trunk, freeing up the factory OBD2 port for their Diablo Sport / SCT / HP Tuners device.
( 3 )
$55.00
Digital Guard Dawg Slim Line OEM-style start buttons are modified versions of the factory models that have been converted to work with all 2GO Keyless modules--plus they are only 1/4 in. thick! They can be mounted anywhere with ease--even directly over an existing ignition switch for a beautiful factory finish look. Digital Guard Dawg includes a mounting platform, a finished trim ring, and a nylon sleeved harness that simply plugs into the 2GO Keyless control modules. Put starting power at the tip of your fingers with Digital Guard Dawg Slim Line start buttons.
( 1 )
$69.30
No doubt the aluminum F150 is a capable truck, and if you've already upped the ante by making more power, new wheels, and fatter tires, then it's time to ditch the stock lighting setup too. Morimoto's unbeatable XB LED fog lights have been top sellers forever, and now the lineup expands with offerings such as the new high performance XB LED taillights! * COMPATIBLE: With all Non-BLIS F150s from 2015-20, these complete taillight assemblies will swap directly in place of the original F150 taillights, use all of the stock mounting points, and should only take around 30 minutes to install. * PLUG-N-PLAY: Wiring is easy too! The XB LED tails are designed to work without any special wiring (2018-20 do require the optional harness). They will plug into the factory connectors for the stock lights; and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug-n-play install. No additional resistors, modules, etc. needed! NOTE: 2018-20 F150S REQUIRE THE OPTIONAL HARNESSES, HOWEVER THESE ARE STILL NOT COMPATIBLE WITH OEM LED OR OEM BLIS TAILLIGHT-EQUIPPED TRUCKS. * STYLE: While they look radical, they don't look out of place like other aftermarket options. The geometry flows with the body lines like a boss. The XB LED tails for your F150 are available with either a smoked or red lens. Both will illuminate red. * WELL-BUILT: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is lightweight and much stronger than comparable cheap alternatives. The XB taillights may not be the cheapest new taillights for your F150, but they're OE quality.
Not Yet Reviewed
$56.00
On Sale
Racepak Smartwire to Switch Panel Cables are the quickest and easiest way to connect a switch panel, switch module, or keypad to the Racepak Smartwire unit. Ranging from 6 in. to 10 ft., these cables are the perfect choice for almost any application from drag racing to off-road and even pulling! Connect your remote module with Racepak Smartwire to switch panels today!
Not Yet Reviewed
$109.95
$57.95
—
$109.95
AEM Electronics' BMS connector plug and pin kits are the replacement connectors for their battery management systems Master and Satellite modules for VCU. The kits contain a quick-connect, waterproof connector and are supplied with terminals, seals, and housings. For a proper fit and optimal performance, service your AEM EV battery management systems with their BMS plug and pin kits.
Not Yet Reviewed
$68.65
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
