Availability
Showing In Stock Items. Show All 13 Items.
On Sale
PerTronix Flame-Thrower III ignition coils were developed for use with the new Ignitor III electronics. They feature an ultra-low resistance of 0.32 ohms with 45,000 V. The coils are engineered to charge to peak current typically 30-70 percent faster than other ignition coils. This means that maximum spark energy is sustained to higher engine RPM. The economical units are available in a black or chrome finish.
( 119 )
$64.15
—
$75.85
$57.74
—
$68.26
On Sale
Upgrade from your stock coil to more powerful PerTronix Flame-Thrower II coils. Designed for use with PerTronix's own Ignitor II® ignition systems, these 0.6 ohm coils deliver more than 45,000 V to your plugs for fuller, more complete combustion. Most have oil-filled canisters to keep the low-resistance windings secure and cool for reliable long-term performance. But there also are epoxy-filled versions for when vibration protection is needed. The Flame-Thrower IIs are available in chrome or black (epoxy, black only) and are not for use with original Ignitor ignition systems.
( 284 )
$63.10
—
$71.05
$56.79
—
$63.94
On Sale
Taylor Spiro-Pro spark plug wire sets are the finest high performance street and race wires available today. They offer maximum firepower without radio interference, provide up to 10 times less resistance than standard resistor core wire—and are a must for electronic ignitions, on-board computers, stereos, and pit radios. Other features include: a 100 percent silicone inner and outer jacket that provides heat protection up to 600 degrees F; low-profile silicone boots with grips; and double spring locking spark plug terminals for a secure connection. The wire sets are available in a variety of boot and distributor terminal ends, assembled or not, and nine vibrant color options. Order the universal or vehicle-specific set that best suits your application.
( 662 )
$60.75
—
$121.45
$54.68
—
$109.30
On Sale
PerTronix Flame-Thrower upgrades your stock coil to something with more wallop! Flame-Thrower coils deliver more than 40,000 V of spark energy to your plugs for fuller, more complete combustion. They're available in a variety of primary resistance ohm versions, with either oil-filled canisters—which keep their low-resistance windings secure and cool for reliable long-term performance—or epoxy-filled canisters for extra vibration protection. Flame-Throwers are available in chrome or black (epoxy, black only). Order the style and options preferred for your application.
( 519 )
$55.65
—
$78.50
$50.08
—
$70.65
On Sale
PerTronix's Flame-Thrower 7mm "Stock Look" spark plug wire sets are designed to give you the ultimate in high performance, while retaining a stock appearance. The core consists of a carbon-impregnated fiberglass center that is spiral-wound with stainless steel alloy. They also feature: * Low 500 ohm per foot resistance * Silicone jackets to resist high temperatures, moisture, oil, and chemicals * EPDM rubber inner insulation for superior heat resistance and the prevention of arcing and voltage leaks * Fiberglass reinforcing braid for added strength and flexibility
( 140 )
$64.60
—
$79.55
$58.14
—
$71.60
On Sale
Flame-Thrower spark plug wires from PerTronix deliver a "high performance" look to your engine compartment, along with true high performance! They're available in universal or application-specific sets; assembled or not; for a variety of engines; with different distributor terminal and spark plug boot end options; multiple colors, sizes, and more. Features include: * Low 500 ohm per foot resistance * Silicon jackets to resist high temperatures, moisture, oil, and chemicals * EPDM (Ethylene Propylene Diene Monomer) rubber inner insulation for superior heat resistance and prevention of arcing and voltage leaks * Fiberglass reinforcing braid for added strength and flexibility * Two current paths for reliability and redundancy
( 118 )
$55.65
—
$112.45
$50.08
—
$101.20
On Sale
Taylor's Pro Wire 8mm TCW core spark plug wire sets beat the competition, both in looks and performance. They're 100 percent pure silicone insulated with a fiberglass reinforced jacket. The TCW core conductor is designed for racing applications where RFI is not a concern and is an excellent choice for Magneto, point type, and non-electronic ignition applications. Available in four colors, these wires feature Taylor's exclusive low profile, 100 percent silicone Pro Boot with finger grips and vibration proof spring lock terminals, and are designed to withstand over 600 degrees F when underhood temperatures are high.
Not Yet Reviewed
$105.00
$94.50
On Sale
Mallory Pro Sidewinder spark plug wire sets are the company's most advanced wires. Their special construction provides the RFI suppression needed for electronic ignition, radio, and computer operation without interference—and at the same time allows the type of ignition system performance previously available only with Mallory Pro wires. The high-temperature silicone jackets can withstand more than 500 degrees F. Pro Sidewinders are available in ready-to-use sets cut for specific applications, or extra-long universal sets. Features: * Low 300 ohm resistance spiral core delivers high energy output for maximum spark at the plug * Great RFI suppression meets the demands of today's on-board electronics, such as electronic ignition, sound systems, and computer controls * 8mm ozone-resistant red silicone jacket repels water, oil, grease, and fuel—and withstands temperatures up to 500 degrees * Available in ready to install kits for various applications or universal V8 kits
( 33 )
$145.75
—
$167.45
$80.95
—
$92.95
On Sale
Holley EFI Smart Coils are a bolt-in ignition upgrade for your Gen III HEMI or Coyote engine. Here's the difference over a stock coil: they produce more spark energy while consuming less power without sacrificing voltage output. This means you get hotter spark at the plug to burn the maximum amount of fuel in each cylinder while using less power from your electrical system. The Smart Coils are available individually and in sets of 8. * For Hemi combinations currently using Holley EFI or Terminator X, use Smart Coil Ignition Harnesses 558-312 and Coil Extension Harnesses 558-326 for a plug-and-play solution. Features: * Direct bolt-on to factory valve covers * Same wiring pinout as other IGN-1A coils for easy plug-in upgrades (Will not work with factory wiring) * More spark energy than any other smart coil on the market for maximum fuel burn during combustion sequence * Low current draw means less demand on the electrical and charging system * Built-in ignitor for compatibility with Holley EFI and many other aftermarket ECUs * Maximum operating voltage of 18 V—for compatibility with both 12 V and 16 V electrical systems found in many performance/race applications
Not Yet Reviewed
$106.95
$58.95
On Sale
Outshine the competition in both looks and performance with Taylor Spiro-Pro universal spark plug wire sets. Order the model that's compatible with your engine application. Features include: * 100 percent silicone inner core and outer jacket * Spiro-wound core consists of highly conductive resistor conductor spiral with stainless steel wire, covered with a fluorocarbon conductive material * More firepower to the spark plugs than OEM resistor core wires, and up to 10 times less resistance than standard resistor core wires * Eliminate radio frequency interference (RFI) * Highest temperature-rated wire on the market (600 degrees F) without the need for additional sleeving * Taylor's exclusive low-profile, vibration-proof, 100 percent silicone Pro Boot with grips * Double spring-locking spark plug terminals * Choice of many vibrant colors
( 2 )
$66.30
—
$94.40
$59.67
—
$84.96
On Sale
Slip on a set of PowerCables spark plug wires from JBA Performance Exhaust to up the game of your ride! These plug wires feature 100 percent silicone jackets and unique boot ends that are designed to offer maximum clearance, while withstanding severe wear and tear for a longer lifespan. Don't put old spark plug wires on your new fully equipped engine when you can add JBA Performance Exhaust PowerCables spark plug wires for better performance and the reliability you expect! Features and benefits: * Extra thick diameters * Ultra-low resistance design * Wire wound mag conductors * Custom tailored lengths with cylinder I.D. labels * Improved under hood appearance * Resistant to heat and abrasion * Improved performance through ignition system * Superior Electro Magnetic Interference (EMI) suppression
( 55 )
$73.20
—
$112.95
$65.88
—
$101.66
On Sale
Bigger, better wire! Taylor 409 Race-Fit Pro Race spark plug wires start with Taylor's 8mm wires (available in spiral-wound or solid core) with a silicone inner insulator, fiberglass braid, and a 100 percent pure silicone jacket. Then they add a heat-treated fiberglass mesh skin and a third layer of pure silicone to get a full 10.4mm diameter. Taylor bonds pure silicone boots directly to the wires. The results are wires that have a 100,000+ V dielectric strength rating that gets more spark to your plugs.
( 157 )
$71.60
$64.44
On Sale
Molded in impact-resistant thermoplastic, these ACCEL Motorcycle Power Pulse coils feature everything that your V-Twin needs from a coil. They offer higher spark voltage, faster rise time, and longer spark duration.
Not Yet Reviewed
$184.95
$101.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
