Availability
Typical aftermarket exhaust manifold bolts are much shorter than stock which after numerous heat cycles can cause them to fatigue and start to stretch, leading to exhaust leaks and possible breakage after repeated re-torques. The finish and coating on most of these bolts can also lead to premature corrosion and zinc embrittlement. Replace damaged or corroded exhaust manifold bolts with BD Diesel class 10.9 bolts and spacers which improve thermal durability to stand up to the heat and non-Zinc plated fasteners prevent zinc embrittlement. Order the kit recommended for your vehicle and engine application. BD Diesel exhaust manifold bolt and spacer kit #1041483 details: * Exhaust spacers ensure fastener operates in elastic stretch without fracture or permanent yield * Class 10.9 hardware * Non-zinc plated fasteners prevent zinc embrittlement * Includes 16 exhaust spacers (18mm) * Includes 16 flange head exhaust bolts (M8x1.25 – 40mm 10.9)
Not Yet Reviewed
$95.95
We have put together these Summit Racing™ exhaust gasket and bolts Pro Packs to ensure a leakproof seal for your headers. They feature Fel-Pro Performance exhaust header gaskets made from high-temperature, high-density fiber material around a perforated steel core for durability and heat resistance. To provide a tight seal, we include Stage 8's Grade 8 locking header bolts. They use a patented system that consists of a grooved hex head bolt, a retainer, and a snap clip. The retainer fits over the bolt head and locks the bolt against the header tube, and the snap clip holds the retainer in place. Use one of these Summit Racing™ exhaust gasket and bolts Pro Packs to eliminate blown header gaskets from loose bolts.
( 7 )
$73.39
—
$99.99
Get your vehicle's timing in check using one of these Summit Racing™ LS2 timing chain and accessory kits. They include a timing chain set, crankshaft bolt, timing cover gasket, and valve cover gasket sets. You'll be able to freshen up your timing system with all of the necessary components. Order the model recommended for your year/make and engine application.
( 8 )
$99.96
Cometic MLS marine head gaskets are designed to provide maximum sealing performance for today's high-output marine engines. These high performance gaskets feature multi-layer stainless steel construction that provides excellent strength, rebound, and corrosion resistance. Their outer layers are embossed and coated on both sides with Viton®, which meets the demands of harsh sealing environments, load conditions, and surface finishes. The center layer is uncoated stainless steel, which is available in multiple thicknesses. Cometic MLS marine head gaskets promote an even clamp load across the sealing surface for reduced bore distortion, with no need to retorque.
( 7 )
$90.53
—
$95.06
Clean, flat surfaces are essential to a good seal. However, that type is surface is rarely available. The best way to seal a warped or uneven exhaust is with SCE Pro Copper embossed exhaust gaskets. These replacements feature an embossed O-ring around the exhaust port to increase sealing pressure for tight, leak-proof performance, even on imperfect surfaces. Whether your ride is a motor home or hot rod, or is used for towing or racing, you'll appreciate the trouble-free seal of SCE Pro Copper embossed exhaust gaskets, available for a wide range of port styles and sizes.
( 105 )
$50.99
—
$62.59
Cometic MLS head gaskets are constructed from multiple layers of stainless steel for strength and contain load-controlled embossments that conform load distribution across the sealing area. This creates an exceptional seal by requiring less clamp load—resulting in less bore distortion. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing. MLS head gaskets are available for most aftermarket cylinder heads; as with all of Cometic's MLS head gaskets, no sealants or re-torque is required.
( 553 )
$87.95
—
$99.81
Mahle sealing products are trusted by OEMs and technicians around the globe. They are the leaders in domestic, Asian, and European applications. Mahle engine conversion gasket sets offer the right sealing performance for your project. These kits are precision-cut and contain the correct selection of gaskets and seals needed. Some kits may include RTV for upper and lower pan gaskets. Need a full set? Just add one of Mahle's head sets and you will have everything you need. Features include: * Meet or exceed the original equipment specifications * Utilize OE equivalent or better materials * Packaged in a shrink-wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
( 13 )
$60.99
—
$65.99
Common symptoms of poor intake manifold gasket sealing may include leaks, rough idling, and stumbling. For your next engine build, use Mahle Original intake manifold gaskets to seal your engine up tight! It's a known fact—proper sealing is vital to create maximum horsepower within the engine, and these gaskets will allow you to achieve a good, positive seal. They utilize premium materials and are precisely designed to match OE quality, fit, form, and function. Order the intake manifold gasket designed for fitment on your particular vehicle by Mahle Original, one of the most trusted names in professional sealing solutions for engines and exhaust.
( 103 )
$70.99
—
$95.99
Not all solid copper gaskets are created equal. SCE uses premium 99 percent pure copper sheets that are precisely rolled to our specifications and tested for uniform flatness to assure precise cylinder head-to-block alignment and eliminate uneven loading. After processing, each gasket is annealed to ensure optimum mating and provide measurable gains in cylinder sealing, as evidenced by lower leak-down percentages. O-ringing is recommended. Pro Copper gaskets are available in many bore and thickness combinations to suit your performance needs.
( 19 )
$69.14
—
$99.61
Standard Motor valve cover gaskets feature a precision-molded, high-temperature rubber construction to ensure maximum performance, extended service life, and airtight sealing. Their design matches the application cylinder head mating surface and the anti-corrosion material resists oil. The precision manufacturing, multiple layers of testing, and detailed validation process ensure Standard parts don't just fit, they perform and they last. Order the Standard Motor valve cover gasket best suited for your application.
Not Yet Reviewed
$94.99
Flatout Gaskets offers a comprehensive line of performance seals—including these 4- and 6-bolt flange collector gaskets, which are engineered from top-grade material to take on high heat produced by your exhaust headers. Their high thermal conductivity pulls heat away from the heat source and allows them to expand and contract without damage. Flatout collector gaskets feature smooth contours, accurate hole locations and tight tolerances to provide an exceptional fit and seal. Get the most performance out of your engine; use Flatout collector gaskets—they seal where others don't!
Not Yet Reviewed
$50.99
Holley throttle body base plate gaskets are designed to fit the exact bore diameter of the Holley TBI Pro-Jection units. They are made of a composite material to withstand engine compartment temperatures while providing a leak-free seal.
( 3 )
$76.45
Flatout Gaskets makes a broad line of quality intake gaskets from premium materials so that they can handle the stresses of high performance applications. Don't take chances with inferior gaskets on your next performance buildup. Trust Flatout gaskets to seal up right the first time.
( 30 )
$57.99
Summit Bucks
ACDelco GM Genuine Parts engine cylinder head gasket kits include the necessary parts to replace your vehicle's engine cylinder head gasket, including the entire valve cover bolt assembly. The head gasket contains all the heat and compression generated by your vehicle's engine. It seals the combustion chambers and coolant and oil passages between the cylinder head and the engine block. These engine cylinder head gasket kits are GM-recommended replacements for your vehicle's original components. The original equipment kits contain components that will provide the same performance, durability, and service life you expect from General Motors. Order the model designed to fit your application.
Not Yet Reviewed
$71.99
Stop dripping oil with these Dorman valve cover gaskets. They are manufactured from high-quality materials to help seal the valve cover to the cylinder head. Available for a variety of engines and configurations, these Dorman valve cover gaskets are an excellent choice for your OEM rebuild.
( 18 )
$70.99
Fatout Armored RCC (rubber coated copper) header gaskets features a rubber coating that is inert to almost all fluids and solvents and can withstand the extreme temperatures produced by the hottest drag motors. The dry coating is very thin to ensure low torque loss and is durable enough to be reused in most cases.
( 13 )
$61.99
These Summit Racing™ exhaust gaskets are made from thick copper, and feature an embossed ridge around the exhaust port for a tight, leakproof seal. The copper gaskets help even out the flow between the head and header flange to minimize warping. Also, they'll conform to rough or irregular surfaces to maintain a positive seal, while keeping the header bolts tight.
( 210 )
$51.99
—
$52.99
Trick Flow® StreetBurner® and Track Heat® intake manifold hardware kits include all of the hardware originally packaged with a Trick Flow® manifold. Kits include: * Four 5/16-24 in. nuts * Four 5/16-24 in. x 1 3/4 in. studs * Three 3/8 in. NPT pipe plugs * Two 1/4 in. NPT x 1/4 in. hose barb fittings * Two 1/4 in. vacuum caps * Two 5/16-18 in. x 6 in. bolts * One 1/4 in. NPT x 3/8 in. hose barb fitting * One 3/8 in. vacuum cap * One 1/4 in. heater hose spacer * One 7 in. fuel line protective sleeve
( 2 )
$50.99
These Trick Flow® R-Series and 351W intake manifold hardware kits include all of the hardware originally packaged with Trick Flow® manifolds. Includes: * Five 5/16-24 in. nuts * Five 5/16-24 in. x 1 3/4 in. studs * Two 3/8 in. NPT pipe plugs * Two 1/4 in. NPT x 1/4 in. hose barb fittings * Two 1/4 in. vacuum caps * One 5/16-18 in. x 6 1/2 in. bolt * One 1/4 in. NPT x 3/8 in. hose barb fitting * One 3/8 in. vacuum cap * One 1/4 in. heater hose spacer * One 7 in. fuel line protective sleeve
( 2 )
$57.99
Remflex gasket material is perfect for the do-it-yourselfer. With your choice of three sizes, these sheets are blank and ready for your pattern to be traced, have the bolt holes punched, and finally, cut out with a sharp utility knife or razor blade. And you can count on the unique flexible graphite material to perform like no other. It's designed to withstand incredible heat—up to 3,000 degrees F—and it will seal warped flanges with no re-torquing necessary. Tailor your own gaskets with the assistance of Remflex material.
( 14 )
$65.59
Clearance
Fel-Pro's PermaDryPlus valve cover gaskets feature precision edge-molded silicone rubber, which resists high heat and delivers reliable sealing on irregular surfaces. This silicone rubber is wrapped around a rigid carrier that adds strength to the gasket to resist being sucked in under high vacuum or blown out when under pressure. At the same time, it also prevents over-tightening of the mounting bolts. Note, however, that these gaskets are not intended for race applications.
( 253 )
$51.99
—
$99.99
Simple logic says that one of the best ways to avoid oil pan leaks is to make the pan gasket one piece. That's the philosophy behind Milodon's one-piece pan gaskets. They end leaks at the corners, where multi-piece gaskets often fall down on the job. Molded in one continuous piece of rubber, with steel inserts around each bolt hole, the bolts can be securely tightened but not over-tightened. Because of this construction, these gaskets are reusable.
( 8 )
$50.95
SCE MLS Spartan head gaskets are strong, simple to use, and ready for battle. These multi-layer stainless steel (MLS) gaskets feature fluid sealant coating applied to all inner and outer gasket plates. This proprietary method provides a continuous, unbroken coating that seals up to 60RA surface finishes on block and heads, and a superior cold seal. Choose the model designed for your vehicle. SCE Spartan head gaskets, with their advanced manufacturing, delivers trouble-free, bolt-on performance without extra sealants.
( 3 )
$74.77
—
$98.97
These COMP Cams belt drive replacement components are designed for use in the ultimate in cam timing systems. These components provide competition engine builders with the most accurate valvetrain replacement components available today. COMP Cams has all of the parts you'll need, from cam gear bolts to shims, washers, gears, and more.
( 10 )
$68.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
