Availability
Showing In Stock Items. Show All 50 Items.
Get your vehicle's timing in check using one of these Summit Racing™ LS2 timing chain and accessory kits. They include a timing chain set, crankshaft bolt, timing cover gasket, and valve cover gasket sets. You'll be able to freshen up your timing system with all of the necessary components. Order the model recommended for your year/make and engine application.
( 8 )
$99.96
Cometic MLS marine head gaskets are designed to provide maximum sealing performance for today's high-output marine engines. These high performance gaskets feature multi-layer stainless steel construction that provides excellent strength, rebound, and corrosion resistance. Their outer layers are embossed and coated on both sides with Viton®, which meets the demands of harsh sealing environments, load conditions, and surface finishes. The center layer is uncoated stainless steel, which is available in multiple thicknesses. Cometic MLS marine head gaskets promote an even clamp load across the sealing surface for reduced bore distortion, with no need to retorque.
( 7 )
$90.53
—
$95.06
Cometic MLS head gaskets are constructed from multiple layers of stainless steel for strength and contain load-controlled embossments that conform load distribution across the sealing area. This creates an exceptional seal by requiring less clamp load—resulting in less bore distortion. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing. MLS head gaskets are available for most aftermarket cylinder heads; as with all of Cometic's MLS head gaskets, no sealants or re-torque is required.
( 553 )
$87.95
—
$99.81
Mahle sealing products are trusted by OEMs and technicians around the globe. They are the leaders in domestic, Asian, and European applications. Mahle engine conversion gasket sets offer the right sealing performance for your project. These kits are precision-cut and contain the correct selection of gaskets and seals needed. Some kits may include RTV for upper and lower pan gaskets. Need a full set? Just add one of Mahle's head sets and you will have everything you need. Features include: * Meet or exceed the original equipment specifications * Utilize OE equivalent or better materials * Packaged in a shrink-wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
( 13 )
$65.99
Common symptoms of poor intake manifold gasket sealing may include leaks, rough idling, and stumbling. For your next engine build, use Mahle Original intake manifold gaskets to seal your engine up tight! It's a known fact—proper sealing is vital to create maximum horsepower within the engine, and these gaskets will allow you to achieve a good, positive seal. They utilize premium materials and are precisely designed to match OE quality, fit, form, and function. Order the intake manifold gasket designed for fitment on your particular vehicle by Mahle Original, one of the most trusted names in professional sealing solutions for engines and exhaust.
( 103 )
$95.99
Not all solid copper gaskets are created equal. SCE uses premium 99 percent pure copper sheets that are precisely rolled to our specifications and tested for uniform flatness to assure precise cylinder head-to-block alignment and eliminate uneven loading. After processing, each gasket is annealed to ensure optimum mating and provide measurable gains in cylinder sealing, as evidenced by lower leak-down percentages. O-ringing is recommended. Pro Copper gaskets are available in many bore and thickness combinations to suit your performance needs.
( 19 )
$69.14
—
$99.61
Standard Motor valve cover gaskets feature a precision-molded, high-temperature rubber construction to ensure maximum performance, extended service life, and airtight sealing. Their design matches the application cylinder head mating surface and the anti-corrosion material resists oil. The precision manufacturing, multiple layers of testing, and detailed validation process ensure Standard parts don't just fit, they perform and they last. Order the Standard Motor valve cover gasket best suited for your application.
Not Yet Reviewed
$94.99
Holley throttle body base plate gaskets are designed to fit the exact bore diameter of the Holley TBI Pro-Jection units. They are made of a composite material to withstand engine compartment temperatures while providing a leak-free seal.
( 3 )
$76.45
Flatout Gaskets makes a broad line of quality intake gaskets from premium materials so that they can handle the stresses of high performance applications. Don't take chances with inferior gaskets on your next performance buildup. Trust Flatout gaskets to seal up right the first time.
( 30 )
$57.99
Trick Flow® StreetBurner® and Track Heat® intake manifold hardware kits include all of the hardware originally packaged with a Trick Flow® manifold. Kits include: * Four 5/16-24 in. nuts * Four 5/16-24 in. x 1 3/4 in. studs * Three 3/8 in. NPT pipe plugs * Two 1/4 in. NPT x 1/4 in. hose barb fittings * Two 1/4 in. vacuum caps * Two 5/16-18 in. x 6 in. bolts * One 1/4 in. NPT x 3/8 in. hose barb fitting * One 3/8 in. vacuum cap * One 1/4 in. heater hose spacer * One 7 in. fuel line protective sleeve
( 2 )
$50.99
These Trick Flow® R-Series and 351W intake manifold hardware kits include all of the hardware originally packaged with Trick Flow® manifolds. Includes: * Five 5/16-24 in. nuts * Five 5/16-24 in. x 1 3/4 in. studs * Two 3/8 in. NPT pipe plugs * Two 1/4 in. NPT x 1/4 in. hose barb fittings * Two 1/4 in. vacuum caps * One 5/16-18 in. x 6 1/2 in. bolt * One 1/4 in. NPT x 3/8 in. hose barb fitting * One 3/8 in. vacuum cap * One 1/4 in. heater hose spacer * One 7 in. fuel line protective sleeve
( 2 )
$57.99
Clearance
Fel-Pro's PermaDryPlus valve cover gaskets feature precision edge-molded silicone rubber, which resists high heat and delivers reliable sealing on irregular surfaces. This silicone rubber is wrapped around a rigid carrier that adds strength to the gasket to resist being sucked in under high vacuum or blown out when under pressure. At the same time, it also prevents over-tightening of the mounting bolts. Note, however, that these gaskets are not intended for race applications.
( 253 )
$54.99
—
$91.99
Simple logic says that one of the best ways to avoid oil pan leaks is to make the pan gasket one piece. That's the philosophy behind Milodon's one-piece pan gaskets. They end leaks at the corners, where multi-piece gaskets often fall down on the job. Molded in one continuous piece of rubber, with steel inserts around each bolt hole, the bolts can be securely tightened but not over-tightened. Because of this construction, these gaskets are reusable.
( 8 )
$50.95
SCE MLS Spartan head gaskets are strong, simple to use, and ready for battle. These multi-layer stainless steel (MLS) gaskets feature fluid sealant coating applied to all inner and outer gasket plates. This proprietary method provides a continuous, unbroken coating that seals up to 60RA surface finishes on block and heads, and a superior cold seal. Choose the model designed for your vehicle. SCE Spartan head gaskets, with their advanced manufacturing, delivers trouble-free, bolt-on performance without extra sealants.
( 3 )
$74.77
—
$98.97
Summit Bucks
ACDelco offers rear main seal housings for a wide range of year/make and engine applications. The one-piece aluminum replacements are designed, engineered, tested, and backed by General Motors. They are validated OE parts for specific Chevrolet, Buick, GMC, and Cadillac vehicles. These components are designed to give the engine oil leak protection from between the crankshaft output flange and the engine block. Order the engine crankshaft seal housing recommended for your ride.
( 8 )
$66.99
Chevrolet Performance composition head gaskets are recommended for stock and mildly modified engines. They're available in a variety of bores, compressed thicknesses, and volumes for fitment on specific vehicle and engine applications.
( 121 )
$65.99
When you need an oil pan gasket for your high performance Ford engine, why not get the ones designed by the folks who made the engine? These Ford Performance Parts oil pan gaskets are a one-piece design that features rubber sealing material bonded to a solid steel core, for a strong, reliable seal.
( 95 )
$76.99
Mahle Original offers a choice of cylinder head gaskets to fit your project with the most effective, leak-free seal. Because vehicles and performance levels are as different as the people who drive them, a head gasket that works for you may not work for another. Mahle Original knows this. Their list of head gasket materials includes multi-layered steel, Solicor, VR-2000, Nitroseal, and VR500. Each does their job differently, but you can rest assured that the sealing job they do will be effective and efficient. Positive sealing is available with Mahle Original cylinder head gaskets. Order the style designed for fitment with your vehicle and engine application.
( 45 )
$51.99
—
$99.99
Chevrolet Performance has the official parts that your classic vehicle needs to keep it in pristine condition, including these head gaskets, which offer a precision fit between the cylinder head and header to improve exhaust flow. These head gaskets feature durable quality construction to maintain a reliable seal under high pressure and temperature changes. Whether you're installing a new set of heads or are just reinstalling your stock factory manifolds, add Chevrolet Performance head gaskets to ensure a precision fit and a tight, leak-free seal.
( 26 )
$78.99
—
$96.99
Ford Performance Parts performance cylinder head gaskets minimize blowout and are available in several sizes and thicknesses to accommodate many Ford applications. From "competition" gaskets with solid metallic cores and wire encased combustion chamber seals to gaskets with pre-flatten copper or steel wire combustion rings, genuine Ford cylinder head gaskets will deliver leak-free performance.
( 29 )
$58.99
AFR intake manifold gaskets are manufactured from high-quality composition gasket material. They provide excellent sealing and durability and can be trimmed if needed for modified ports. AFR intake manifold gaskets are ideal for OEM replacement, as well as high performance street, drag race, and oval track applications.
( 72 )
$56.70
Are you working on a marine engine? You may find that all of the gaskets and seals that you need for certain jobs are not contained in typical gasket sets. Fel-Pro Performance marine gasket sets cover those situations. They include the seals not found in head sets, including replacements for the oil pan, water pump, timing cover, fuel pump, and rear main seals (depending on the set you order). Order the marine gaskets recommended for your year/make and engine application.
( 46 )
$82.99
Flatout valve cover gaskets combine cork with a high-grade rubber polymer for a tough, long-lasting gasket. They have a heat rating from 250 to 380 degrees F and are available for a variety of applications.
( 5 )
$51.50
—
$72.99
SCE offers AccuSeal Pro oil pan gaskets for a wide range of vehicles from the 1950s and up. They are available in one or two-piece designs and are made with proprietary processes and materials like steel core laminate, rubber, silicone, PTFE coated, aluminum, and elastomer. The replacement gaskets are engineered to resist heat and seal surface irregularities. Plus, they have built-in crush limiters to prevent damage from over-tightening. For street or strip, order the AccuSeal Pro oil pan gasket recommended for your application.
( 11 )
$84.64
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
