Availability
Aeroquip replacement brass sleeve fittings are quality fittings for your air conditioning hoses. They are available in several sizes to suit your automotive needs.
( 2 )
$52.99
RapidAir Products Maxline outlet blocks assist in setting up your compressed air system. These outlet assemblies can be strategically placed through your planned layout for convenient usage. They're available in different fitting sizes.
( 4 )
$70.99
—
$79.99
Save yourself time and money with brake line fitting assortment sets from Summit Racing™. Manufactured from quality material, the fittings are available in thread pitches and configurations to suit your specific brake setup. Each kit includes a convenient plastic storage case with separated compartments labeled with the proper sizing of each fitting for quick, easy identification.
Not Yet Reviewed
$90.99
These Allstar Performance brake shut-off valves allow you to easily control brake fluid flow. They feature a 1/8 in. NPT inlet and outlet and are rated at 2,000 psi for racing applications. The valves have an easy to use plastic handle at the top for quick shut-off.
( 11 )
$69.99
Flaming River offers a variety of power steering adapter fittings. They're made from materials such as brass zinc plated steel. Order the sizes needed to connect your power steering hoses.
( 22 )
$58.99
—
$68.99
Direct from Detroit, New Vintage USA LS temperature sender installation kits allow standard 1/8 in.-27 NPT threaded senders to be installed in the standard LS ports. The included M12 bushings are handmade from brass hex stock and enable you to use full-length temperature senders—there is no need for special "short" units. A pre-wired step-up resistor for tachometers reading a tach signal from the PCM is also included. Choose New Vintage USA LS install kits for accuracy, proper fitment, and American craftsmanship.
( 2 )
$65.99
The Stop Shop offers brake fitting assortments in a variety of materials, such as aluminum, brass, and steel. They come in sets ranging from 16 to 45 pieces, and are furnished in sizes to fit specific brake line applications. The fittings include tube nuts in styles such as male inverted flare and male bubble flare. Order the kit that best suits your brake project.
( 5 )
$56.99
—
$64.99
Pete and Jake`s thru-frame fitting kits allow you to pass your brake lines through your frame. These kits include additional brass fittings to assist you with your brake line installation. Pete and Jake`s thru-frame fitting kits are ideal for use on frame widths up to 2 in.
( 3 )
$60.99
VIAIR push-to-connect fittings attach airlines quickly and effortlessly. They are manufactured from nickel plated brass with a working pressure of 0 to 200 psi. They are also DOT approved, and available in several styles and sizes. From straight unions to swivel T-fittings, to 90 degree elbows, and more, VIAIR has the secure connections to make the installation of pneumatic systems as simple as possible.
( 1 )
$52.95
—
$98.95
McLeod quick-disconnect fittings make disconnecting hydraulic lines quick and easy. Their brass construction is naturally tough and corrosion-resistant and precision-machined to create a tight, leak-free fit. McLeod offers these quick-disconnect fittings individually or as a set, so you can choose just what you need.
Not Yet Reviewed
$59.50
The Stop Shop offers CNC-bent front brake lines that are exact factory replacements on specific vehicles, which uses the original proportioning valve and bracket. Simply remove all original rusty lines and put the new tubes in place. The brake lines are available in 304 stainless and Galfan coated steel tubing. Tube nuts are made from steel, plated for corrosion resistance; and the fittings and tube size will match factory tubes. Spring guards to protect the tubing will be in factory positions (if stock tubes had spring guards). Order the front brake lines recommended for your vehicle.
( 6 )
$50.79
—
$107.99
These Earl's Performance shut-off valves are ideal for use as emergency fuel shutoffs, drain valves, or even as anti-theft devices. They have a lever design, which makes them quick and easy to use.
( 39 )
$66.59
HardDrive replacement petcocks are designed to maximize fuel flow. They are crafted from highly polished steel, and then chrome plated. Whether you need a left spigot, right spigot, or straight down, HardDrive has the selection of replacement petcocks to bring the best out of your gas tank.
( 1 )
$59.36
—
$67.46
The Stop Shop offers a wide range of brake fittings in a variety of materials, finishes, sizes, and configurations to help you facilitate your automotive plumbing. Whether it's inverted or bubble flare fittings, unions, tees, banjo bolts, adapters or other hardware, The Stop Shop has got you covered!
( 23 )
$50.79
—
$54.99
RapidAir Products offers MaxLine inline hand valves for a variety of tubing sizes. These brass shutoffs are nickel plated, and allow you to easily open or close the flow of compressed air with a simple turn of the handle. The inlet and outlet compression fittings are the same dimension, enabling these valves to be connected anywhere within your tubing route.
Not Yet Reviewed
$61.99
On Sale
Clearance
Prevent backflow with Waterman Racing fluid check valves. Offering a selection of styles and AN sizes made from brass or aluminum, their valves protect systems from damage, while ensuring proper operation and starting of your vehicle. Select the check valve needed to plumb your system.
Not Yet Reviewed
$105.99
$64.50
—
$95.39
Gardner-Westcott transmission line adapters are designed to give your fittings good looks, while retaining high-quality standards. They are made of brass and feature a chrome plated finish for a show-car shine. Gardner-Westcott transmission line adapters are available in different sizes to accommodate multiple hose configurations.
Not Yet Reviewed
$59.99
OTC fuel injection adapters are equipped with a quick-connect Shrader valve for safety. Many are included in OTC Master and Pro Master kits, but are offered individually as replacements, extras, or to supplement your fuel tester kit.
( 1 )
$61.99
S.U.R.&R. 1/4 in. brake line fitting assortments will assist you with numerous brake job applications. These boxed kits come with a variety of metric and standard fittings organized in a durable storage case for easy selection. The sizes and styles included offer plenty of versatility. Convenience and efficiency—you'll have the connection you need every time with S.U.R.&R. 1/4 in. brake line fitting assortments.
Not Yet Reviewed
$65.99
Aeroquip AN to NPT pipe adapters are made from high-quality materials, like steel or anodized aluminum, to precise aerospace tolerances. Get equipped for your plumbing projects with Aeroquip pipe adapters.
( 229 )
$54.99
Dorman 101-piece grease fitting tech trays are time-saving kits that contain their most popular grease fittings. Each fitting is constructed from high-quality materials for long-lasting durability. Plus, the tray is lightweight and convenient to transport between home and work, or from job to job. Features include: * Cost-efficient and time-saving alternative to purchasing components separately * Saves bay time by helping you keep the hardware you need organized and close at hand * All pieces available for reorder * Includes a matching visual reference guide on the inside cover to identity parts
Not Yet Reviewed
$57.99
Aeroquip high-pressure adapters feature high-quality material construction to precise aerospace tolerances. They get built to handle the pressure, making them perfect for any of your plumbing needs. Get your fabrication on with the Aeroquip high-pressure adapters best suited to match your needs!
( 23 )
$59.99
Looking for a cool way to dress up your engine compartment? Check out our vast assortment of Summit Racing™ hose fittings. They're available in chrome plated steel, brass, stainless steel, or anodized aluminum versions. As with all Summit Racing™ parts, the fittings are designed to provide quality and a proper fit. They are available in a wide range of sizes, angles, finishes, styles, and attachment options.
( 387 )
$52.99
High performance street or race applications call for Jiffy-tite quick-connect 5000 Series fittings for safe, secure fluid connections. Offered in different series to allow you to make the best choice for your flow needs, the 5000 Series range in size from -8 AN to -12 AN, as well as 3/8 in., 1/2 in., and 3/4 in. NPT. Crafted from lightweight 6061-T6 aluminum, brass valves, and stainless steel ball bearings, these fittings are corrosion-resistant to last. Unlike with traditional threaded fittings, Jiffy-tite 5000 Series fittings one-two connections happen in seconds—and with no fluid mess! The fittings provide minimal flow for any fuel, water, or oil system and are offered with buna nitrile seals for those who to choose to burn alcohol and methanol. Get on the fast track to safer, more secure, slip-proof connections with Jiffy-tite 5000 Series quick-connect fluid fittings.
( 4 )
$51.32
—
$108.25
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
