Availability
Showing In Stock Items. Show All 21 Items.
Perfect for your project car, these Summit Racing™ tubing, flare tool, and tubing bender Pro Packs feature all of the right components to bend, cut, and flare tubing. They include a 25 ft. roll of tubing, a 45 degree flare tool, a tubing cutter, and a tubing bender that can create up to 90 degree angles. Summit Racing™ tubing, flare tool, and tubing bender Pro Packs are available in your choice of 1/4 in., 3/16 in., 5/16 in., or 3/8 in. tubing diameters.
( 6 )
$85.96
—
$94.96
These OTC hydraulic hoses are lightweight and rugged enough to use around the garage or service station. OTC manufactures these high-flow hoses from durable materials to ensure dependability. These hoses have an operating pressure of 10,000 psi and comply with MHI standards IJ100.
Not Yet Reviewed
$99.99
Summit Racing™ stainless steel multipurpose hard lines are ideal for plumbing your brake or fuel systems. These Marine-grade, 316L Polished stainless lines feature a standard 0.028 in. wall thickness for strength while remining workable and are soft-annealed for easier flaring, cutting and bending compared to other stainless steel lines. Molybdenum is also added for ultimate corrosion resistance. These lines meet SAE J1677 and ASTM A249 specifications. They're rated for a minimum burst pressure of 5,945 psi (and higher depending on line OD) and have been pressure tested and checked for safety. Order the tubing diameter needed for your applications. NOTE: Stainless steel is more difficult to bend and flare, compared to typical steel line. We recommend that a professional-grade flaring tool be used with these lines. Stainless steel can also be difficult to seal when replacing an existing brake or fuel line. The previously installed line can create a wear pattern on the flare seat which will not allow the new stainless steel flare to seal properly. When replacing an existing line we recommend a thorough inspection of the existing brake fitting, fuel fitting, junction block, wheel cylinder, brake caliper, etc. It's possible that the existing component may need to be replaced for a proper seal.
( 10 )
$54.99
—
$58.99
Mishimoto push lock hoses are fast and easy solutions for creating high-quality, reliable lines for your custom build. They are constructed from chemical-resistant nitrile and CPE, making them perfect for a wide variety of applications including petroleum fuels, ethanol, oil, coolant, or air. Push-lock hoses offer simple installation with minimal tools and without the need for clamping in low-temp/low-pressure applications. Mishimoto push-lock hoses are rated for pressures up to 290 psi and temperatures between -40 degrees F and 257 degrees F, making them ideal for use in a wide range of systems, vehicles, and locations. Available in sizes ranging from -4 to -12 AN and 10 ft. or 20 ft. lengths, Mishimoto has the push-lock hose to meet your needs. Like all their products, these hoses are backed by the Mishimoto Lifetime Warranty.
Not Yet Reviewed
$85.95
—
$92.95
Anyone who's owned an older vehicle in areas with four seasons knows what it's like to have broken fuel lines. When they need to be replaced, use Classic Tube stainless tubing coils. Stainless steel resists rust and holds up to the abrasive chemicals in fuel better than regular line. Just cut it to the desired length, slide on some fittings, and flare the line (fittings and flaring tools are not included). For long-lasting performance, choose Classic Tube stainless tubing coils.
( 5 )
$53.99
—
$91.99
Earl's Performance annealed stainless steel tubing will assist you in creating precision hardline systems. The straight lengths of 304 stainless steel are easily formed with tools and can be flared. Plus, they can be polished for a custom look. Earl's tubing is available in several diameters and lengths to fulfill your application needs.
( 11 )
$53.25
—
$99.95
Vibrant Performance pre-assembled hoses are perfect for a wide range of applications, including fuel, oil, coolant and more. These professionally assembled lines feature crimp-on fittings that are installed using a hydraulic crimping tool for a leak-free connections and each hose assembly is pressure tested to its rated working pressure. Vibrant pre-assembled hoses are available in a variety of sizes, lengths and finishes to best suit your plumbing needs.
( 23 )
$51.50
—
$74.50
S.U.R.&R. Max Flex brake line alloy tubing is the ideal solution for easily bending and installing replacement fluid lines. This quality copper nickel tubing can be used for brake, fuel, power steering, transmission, and related line applications. It's flexible for easy bending by hand; no bending tools required. Additional notes: * Avoids kinking * Rust and corrosion-resistant line material * Excellent for use in harsh environments * Available in 3/16 in., 1/4 in., 5/16 in., and 3/8 in. sizes
Not Yet Reviewed
$50.99
Speedflow 120 Series Start-Lite hose is lightweight, durable, and race proven. Available in several hose sizes and lengths, they are made from smooth-bore CPE liner with pre-dyed black Nomex cover. If you are looking for less weight than conventional high performance assemblies, Start-Lite hose assemblies would be your solution. They use Speedflow 100 Series reusable hose ends, and there is no crimping machines or special tools are required.
Not Yet Reviewed
$60.89
—
$89.28
Plumb out your classic ride's brakes with pre-bent and flared lines to fit your manufacturer's specifications. Classic Performance brake line kits let you replace worn-out lines in your vehicle, or with some models, you can convert your drum brakes to disc. The installation is clean and hassle-free, with most models not requiring bending or flaring tools. Get your brakes done right, and with the least stress--you should only be stressed if you don't replace those worn-out lines.
( 40 )
$54.99
—
$59.50
Our Summit Racing™ Twist-Tite hose was designed for reduced weight, increased flexibility, and, best of all, affordability. The hose features an elastomer inner tube bonded with a reinforced textile braid, and covered in high-temperature synthetic rubber. The hose is compatible with a wide variety of fluids and is good to 250 psi when used with our Twist-Tite fittings. The red and blue anodized fittings install without tools--they simply Twist-Tite.
( 50 )
$50.99
—
$81.99
Installing your brake tubing can be a breeze. S.U.R.&R. E-Z bend tubing can be easily bent by hand, making routing simple. This hydraulic brake tubing is pressure-rated up to 3,000 psi and meet SAE specifications. You can replace multiple brake lines using metric and standard fittings with this low-cost, labor-saving tubing.
( 60 )
$65.99
—
$103.99
If your vehicle's current A/C lines are damaged with pin holes, have kinks, or are cracked, S.U.R.&R. offers an easy fix with their quality replacement air conditioning hoses. These lines are made of durable rubber material and come in the most common sizes and lengths to help restore your A/C operation.
( 14 )
$78.99
—
$93.99
Fuel line replacement is a common problem due to rust, corrosion, or road debris. S.U.R.&R. fuel-rated nylon fuel tubing is flexible and easy to route. Unlike rigid steel lines, there's no difficulty in handling. You can quickly produce fuel lines to fit virtually any vehicle. This nylon replacement fuel line is made with precision and quality in mind and holds up to 200 psi. It can be cut to size, fixed on top of your fitting, and the clamp tightly crimp-sealed.
( 2 )
$56.99
—
$101.99
Milton Industries has been producing driveway signals for over 40 years and driveway signal bells and chimes would not be complete without a driveway signal hose. Milton Deluxe driveway signal hoses are both UV- and oil-resistant. The deluxe rubber hose is 50 ft. in length and designed for use at service stations, bank/restaurant drive-up windows, home garages, and/or anywhere seeking an attendant to be alerted.
Not Yet Reviewed
$60.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
