Availability
Since the Touring Edition exhausts don't require the use of the S7's factory valves, they're eliminated. When this happens, the ECU stores what is known as a "soft code." While this code is not harmful, who wants it? Enter the AWE Tuning Electronic Valve Simulators. These simple devices plug right into the factory harness in place of the exhaust valves—and prevent any code from ever being stored in the ECU due to the removal of the exhaust valves. Plug them in. Start it up. Drive away. That simple. Comes as a set of two. Exhaust valve simulators are available for a variety of European autos, such as Audi, BMW, Mercedes-Benz, Porsche, and Volkswagen.
Not Yet Reviewed
$70.00
Since the Touring Edition exhausts don't require the use of the AFM factory valves, they're eliminated. When this happens, the ECU stores what is known as a "soft code." While this code is not harmful, who wants it? Enter the AWE Tuning Electronic Valve Disabler Brackets. These simple bracket bolts to the factory AFM exhaust valves—and prevent any code from ever being stored in the ECU due to the removal of the exhaust valves. Bolt them in. Start it up. Drive away. That simple.
Not Yet Reviewed
$75.00
By wrapping your headers with Thermo-Tec exhaust wrap, you keep exhaust heat in your pipes where it belongs. This reduces underhood temperatures up to 70 percent, and cools the incoming air/fuel mixture to increase horsepower and fuel efficiency. Not only that, but the reduced heat also extends the life of electronic components. Exhaust wrap can withstand continuous heat up to 2,000 degrees F, and installs easily with standard hose clamps or the optional stainless steel Snap Straps.
( 114 )
$55.18
—
$113.98
Funk Motorsports offers turbo heat shields for a wide range of (universal) applications, as well as vehicle-specific models for select BMW, Honda, Ford, and Subaru vehicles from 2002 and up. These turbo and/or turbo wastegate thermal blankets work to insulate the hot side and retain the heat within the exhaust gasses themselves. Hotter gasses accelerate faster, leading to them leaving the system sooner—improving spool up and throttle response. Insulating the turbo also helps to lower the amount of heat that dissipates into the engine bay and intake pipework. A cooler intake results in higher performance and more consistent power figures over time. The 4-layer shields are offered in three finishes: titanium twill, carbon fiber twill, and inside out (for turbos in contact with a heat source). Additional details: * Inside-out blankets have internal material mirrored on the outside, as well * Available for a variety of turbocharger and wastegate styles * A turbo is an absolute furnace within the engine bay. Excess heat produced by the turbo can cause devastation to surrounding sensitive components. Protect anything from oil lines, coolant lines, electronics, and even bodywork positioned close to the turbo from the dangers of excess heat * Funk shields feature specifically developed thread construction to allow for exceptional durability when removal is necessary for routine turbo maintenance. The new fireproof ultra-high temperature stainless steel thread is around 1mm in diameter and can now remain highly durable with temperatures in excess of 1,300 degrees C * New, thicker internal heat lagging insulation provides up to 3x improved heat reduction. This insulation wool is created from a ceramic silica complex matting to improve durability over prolonged heat cycles, as well as insulation quantities * ROHS tested and approved to ensure compliance and desired parameters * NOTE: Turbo blankets are not flammable. However, if any flammable fluids are introduced into close proximity of the blanket, the blanket could become a suitable ignition source for a flame to be produced. Please ensure that all necessary precautions are taken in regard to the appropriate maintenance of all oil and fuel lines and fittings surrounding the turbo charger and fuel injection system. Funk Motorsports takes no responsibility for fluid contamination their products.
( 1 )
$101.95
—
$105.47
Techflex ThermaShield Wrap creates a thermal buffer between wires, hoses, and cables and the high-temperature environments surrounding them. ThermaShield is engineered by laminating an aluminized metallic heat shield to a layer of strong, tightly braided fiberglass insulation. This system provides superior protection from radiant heat by reflecting it away from sensitive electronics, wiring, and hoses. A very aggressive, high-temperature adhesive eliminates the need for high-temp Mylar tape or other adhesive. Techflex ThermaShield Wrap endures temperatures up to 1,200 degrees F without delaminating, turning brittle, or suffering adhesive failure. Especially useful where disassembly is difficult or impractical, it is ideal for any situation where protection from radiant heat is a primary concern.
( 2 )
$59.99
—
$119.99
Funk Motorsports thermal protection covers provide additional reliability on starter motors which are prone to failing due to fatigue caused by heat and debris. Easily secured around the starter motor, each cover will ensure your motor is protected from over-exposure to heat. This can prevent costly replacements of the sensitive component. Like all electronics, the relay and solenoid within the starter motor can easily be penetrated by heat. These covers can be easily cut to size. Protect your starter motor and improve performance with a thermal cover from Funk Motorsports!
Not Yet Reviewed
$63.28
Funk Motorsport sensor and injector heat covers provide added protection to sensitive components. Sensors and electrical components are usually exposed to various heat sources and can skew the data and information that is being read by that component. This can provide adverse effects upon your engine running and ultimately cause damage or poor performance down the line. Protect your knock sensor to keep your car running longer. Oil temperature sensor protection can also ensure that your car is running at its optimum. These protectors are made in an easy-to-fit format, which will allow a slide on and secure using Velcro©. They're created using a high-shine heat reflective material to maximize the heat shield qualities. Imagine this product as a specific electronic heat insulation jacket for your ECUs main feeds. The more reliable your boost sensor readings, the more consistent and safe engine performance will be. With modern cars becoming more reliant on electronics, it's important to provide maximum heat protection for sensors. Sensor protection and injector protection covers ensure that these components continue to work as intended for lasting reliability. Each cover provides a strong locking system that can be adjusted to suit your individual component. Available in packs of 2, 4, 6, 8, 10.
Not Yet Reviewed
$56.25
—
$67.50
Walker Direct-Fit SoundFX mufflers provide a quality repair alternative—at a competitive price. These OE-style exhausts feature an internal design with two tubes and two partitions for premium performance and acoustics. The 100 percent aluminized steel construction ensures longer life and a professional appearance. SoundFX mufflers are offered in a variety of shapes, lengths, and inlet/out diameters and quantities for fitment on thousands of vehicle applications.
( 314 )
$86.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
