Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
67 Results Found For "back"
Showing In Stock Items. Show All 88 Items.
King HP-Series Cam Bearings
King HP-Series cam bearings are precision-machined to tight tolerances to control installed oil clearances, reducing operating bearing pressure. These cam bearings are constructed from seamless steel tubing with a thin layer of lead based babbit material to reduce microscopic deflections. The babbit is quickly cooled in the casting process to achieve a very fine grain structure, doubling tensile strength, therefore, the HP-Series offers much more fatigue strength than conventional bearings, and can withstand racing spring loads, while maintaining the excellent surface characteristics of babbit. King also offers HP-Series bearings with a fluoropolymer coating. Bearings with this coating retain engine oil on the surface, even under extreme heat and pressure—a great advantage! Plus, being a lubricant, it provides backup during start-up and in the event of momentary oil starvation. Use track-tough King HP-Series cam bearings in your engine—and experience the difference.
( 17 )
$53.99
—
$97.99
Summit Racing™ Cam Bearings
These Summit Racing™ camshaft bearings are just what you need to freshen up your engine. Why? They use silicon aluminum bi-metal construction. Silicon aluminum is the choice for many of today's engine manufacturers because of its high fatigue strength and superior temperature threshold. Bearing wear is dramatically reduced and the fatigue strength is greatly improved.
( 66 )
$54.99
Sealed Power CP-Series Rod Bearings
Federal Mogul CP-Series rod bearings feature classic tri-metal construction and are a good choice for either street or moderate competition use. They have rugged 1010 steel backings, covered by Federal Mogul's H-24 copper-lead alloy. On top of this is a nickel barrier, followed by the tri-metal (lead-tin-copper) overplate that gives these bearings their strength and fatigue resistance. The bearings are then entirely covered with a flash coating of tin. Order the set designed for use with your make/model and engine application.
( 119 )
$50.99
—
$98.99
Sealed Power Cam Bearings
Today's engines operate under very demanding conditions. Sealed Power has responded to this challenge with their babbit high performance cam bearings. They feature high embedability and conformability and a special "sacrificial" design that enables the bearing surface to deform under extreme loads, preventing any wear and damage to the camshaft.
( 118 )
$50.99
—
$87.99
King BB-Series Cam Bearings
King Engine BB-Series cam bearings are recommended for OE rebuild applications. These cam bearings are babbitt on steel, and are precision machined and then micro-finished to offer long-lasting durability. Save yourself a costly rebuild with King Engine BB-Series cam bearings—stock replacements that been proven, time and time again, to get the job done.
( 14 )
$50.99
—
$78.99
Moroso Oil Filter Block-Off Plates
Moroso oil filter block-off plates are designed for use with the Moroso dry sump oiling system or external oil pump. They are drilled and tapped to accept a 1/2 in. NPT fitting to provide increased clearance for installing an input pressure line. Mounting hardware and O-rings are included.
Not Yet Reviewed
$92.99
Crown Automotive Camshaft Bearings
Camshaft bearings have a relatively easy life compared to other bearings, but they too, eventually need to be replaced. Get Crown Automotive camshaft bearings if they're scored, showing copper, out of spec, or you want all-new parts. They're designed and manufactured to OEM specs for excellent fitment, dependability, and correct sizing.
( 2 )
$59.99
—
$77.99
Kanter Cam Bearings
Cam bearings provide a low-friction surface, supporting the cam shaft, allowing it to spin freely, and critical for proper engine operation. Kanter offers new cam bearings for old cars, covering all domestic makes and models from the 1930s to the 1980s. Made from quality materials, they will provide the proper fit and function to repair or restore your vehicle's operation. Available individually or in sets, select the Kanter cam bearing(s) needed.
Not Yet Reviewed
$53.99
—
$94.99
Sealed Power Connecting Rod Bearings
Sealed Power engine products are a complete system of application-engineered replacement components, including pistons, piston rings, engine bearings, camshafts, oil pumps, timing components and valvetrain products. Sealed Power connecting rod bearings are available with different linings to meet every engine's needs. They're made using either tri-metal or aluminum bi-metal construction for the utmost in performance and durability for all stock rebuilds and mild performance applications. Tri-metal alloys feature a steel base coated with a sintered layer of copper-lead alloy, followed by layers of electro-plated nickel and babbit to produce the ultimate bearings. Bi-metal aluminum types carry all of the same features without the babbit, as specified by many of today's top engine builders. Sealed Power bearings are available for a multitude of engines in sizes ranging from standard to 0.060 in. oversized.
( 8 )
$50.99
—
$79.99
King MC-Series Rod Bearings
King introduces the new solution for the aftermarket demand of superior service life and performance in modern engines. The King MC-Series rod bearings were engineered in the wake of ongoing internal combustion engine development—resulting in ever-decreasing minimum oil film thickness values; higher cylinder pressures, temperatures and loads; smaller load carrying bearing surfaces; and lighter components. Additionally, "start/stop" technology produces more frequent mixed lubrication and metal-to-metal contact conditions. The new King MC-Series rod bearings feature a nano-composite polymer coating, known as K-340. It's designed for applying over relatively hard substrates: bronze, aluminum alloys, sputter overlay, and King silver overlay. These bi-metal silicone aluminum sets are available in different sizes for fitment on countless car and truck applications.
Not Yet Reviewed
$96.99
Sealed Power Main Bearing Sets
Today's engines operate under very demanding conditions. When these Sealed Power main bearing sets are used in performance applications, all components are pushed to their limits—and many must be changed to meet these special demands. Federal Mogul, a longtime supplier to both OEM and the aftermarket, has responded to this challenge with its tri-metal, copper-lead, high performance main bearing sets. They're tested in the lab and proven on the track. The bearings are available for various crankshaft undersizes, for direct replacement or performance usage on a wide range of specific applications.
( 98 )
$52.99
—
$86.99
King XP-Series Rod Bearings
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 70 )
$50.50
—
$99.99
Clevite H-Series Main Bearings
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 141 )
$81.99
—
$99.99
Mahle Original Premium Piston Ring Sets
Mahle Original piston ring sets are designed to be installer-friendly. They are pre-lapped to seat immediately, virtually eliminating break-in time. Ring materials and coatings, as well as ring tension, are all optimized for reduced friction and extended life in each application. The compression rings feature a barrel-faced contact area for more efficient compression and CNC-controlled gap chamfer to optimize compression and reduce blow-by. Intermediate rings have a reverse twist design for better groove side sealing, and taper race machining to enhance contact. The CP-20 oil ring assemblies feature a 20 degree ear angle, an exclusive feature that provides the best possible side seal against the cylinder wall, and a special chemical polish on the oil ring expander offers enhanced oil drain back. Mahle Original piston ring sets provide unmatched quality and ease of installation, making them the rings of choice for today's engine builders.
( 56 )
$50.99
—
$99.99
Clevite P-Series Main Bearings
Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
( 254 )
$61.99
—
$99.99
Clevite P-Series Rod Bearings
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 293 )
$52.99
—
$99.99
Sealed Power MA Series Main Bearings
These Sealed Power MA Series main bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank whose surface hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better control of wall variance. It also helps to minimize debris embedding, which can score the crank's surface.
( 76 )
$50.99
—
$99.50
ACL Performance Race Series Rod Bearing Sets
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 9 )
$52.99
—
$94.99
King XP-Series Main Bearings
Built with enhanced tri-metal, King XP-Series main bearings have a layered copper lead construction, with a nickel plate barrier and lead/tin/copper Babbitt overlay over a steel backing--in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors: an amazing +/- .0001 in. The XP-Series main bearings are narrowed for large radii crankshafts and feature enlarged, chamfered oil holes with full, 3/4 in., or 1/2 in. grooving for improved oiling. They deliver consistent and reliable performance with a high-load capacity. These race-only Xtreme Performance (XP-Series) Tri-Lecular main bearings are proven track-tough to handle the ground-shaking power of your race engine. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 45 )
$50.50
—
$99.99
ACDelco GM Genuine Parts Oil Pump Pickups
ACDelco GM Genuine Parts oil pump pickups are designed, engineered, and tested to rigorous standards and backed by General Motors. These replacement pickups are true OE parts, delivering the correct fit along with predictable performance. They're available in different styles for hundreds of applications from the 1990s and up. Maintain your GM vehicle with genuine factory parts from ACDelco.
( 5 )
$50.99
—
$75.99
Clevite AL-Series Main Bearings
For some engines, the softer and more conformable nature of aluminum is preferable to the stiffer characteristics of the steel backings used for many bearings. Clevite AL-Series main bearings offer the features found in OE-type aluminum bearings, combined with the distinct advantages of proven Clevite know-how. That includes things such as carefully chosen eccentricities tailored to the application, and that means solid, reliable performance. Clevite AL-Series main bearings are a great choice for anything from OEM-style rebuilds to mild performance applications. Clevite recommends these main bearings for most engines using a cast crankshaft.
( 10 )
$52.50
—
$97.99
Ford Performance Parts High-Volume Oil Pumps
Ford Performance Parts high-volume oil pumps are high-quality, pressure-tested, and hand-turned to deliver more oil than stock pumps. They are offered for most popular Ford V8s. Additional information: * Most are high-volume with standard pressure * Also available for select applications requiring higher volume and pressure * May require bolt-on style pickup (not included) * Some are not recommended for use with stock-capacity oil pans due to their higher pumping capacity * Because of their larger size, some pumps will not fit stock rear sump oil pans * Where applicable, includes a steel backing plate to reduce internal leakage and cavitation erosion
( 46 )
$63.99
—
$72.99
Chevrolet Performance Windage Trays
Windage is the turbulent flow of air within the crankcase caused by rotation of the crankshaft. As rpm increases, so does windage. Chevrolet Performance windage trays reduce aeration of the oil from windage, permit rapid oil return, and protect from oil splash-back—resulting in more horsepower and improved oil control for your performance engine. Select the right windage tray for your specific vehicle and engine application; get more positive engine lubrication, and reclaim lost horsepower!
( 21 )
$75.88
—
$92.56
Dart Cam Bearings
If you're building up a Dart block and want the best bearings with the correct sizing, then you'll want Dart cam bearings. They're fully grooved, made from steel-backed babbit, and specifically designed for high performance use. To all of this, Dart adds their own moly-PTFE coating for even better performance and durability. This coating is approximately 0.0005 in. thick, which translates into 0.001 in. less overall clearance.
( 34 )
$92.99
—
$98.99
