Availability
Showing In Stock Items. Show All 52 Items.
Moroso filtered fitting screen kits will do the job of effectively eliminating metal and debris from your oiling system.
Not Yet Reviewed
$105.99
Single and dual remote Perma-Cool oil filter relocation kits enable you to position your oil filter where you want it for more convenient oil changes and increased engine oil capacity. The complete kits include everything needed for an easy installation: A spin-on adapter, a remote oil filter bracket, hoses, fittings, mounting hardware, and detailed instructions. They use 3/4 in.-16 threaded, Ford-type spin-on oil filters (not included), and come with an assortment of adapters to attach the oil filter bracket to almost any engine. Relocation kits are available in universal and application-specific models.
( 60 )
$70.41
—
$92.43
Moroso breather tanks are great for low vacuum venting. They're offered in a choice of sizes to suit your application needs, and may be modified for additional fitting for dual vent hoses. These high-strength, lightweight aluminum breather tanks feature a 2 in. breather filter mounted on top and an aluminum bottom drain fitting and ball valve.
( 110 )
$57.99
—
$84.99
Moroso evacuation system valve cover adapter fittings are designed for the crankcase evacuation kits. They provide an easy way of adding a -12AN male fitting to OEM GM LS engines with an oil fill bung in the valve cover. Just remove the oil fill bung, screw in the fitting and tighten down with built-in hex nut.
( 1 )
$83.99
Derale oil filter sandwich adapters are designed to provide external oil lines for oil coolers without relocating your factory filter. These high-quality aluminum adapters are available in a variety of styles and configurations to best suit your application. Count on Derale Performance for the oil filter sandwich adapters you need for your oil system!
( 9 )
$65.97
Is your transmission or rear-end vent line blowing oil? Sounds like you could use one of JOES Racing Products' vent tanks to remedy the situation. They're offered for 1 1/2 in. or 1 3/4 in. tube mounting and flat sheet metal mounting. These units are equipped with a filter to keep dirt out of your lubricant, and 1/4 in. NPT pipe threads or an -8 AN at the bottom for your vent line.
( 20 )
$74.95
Sikky Manufacturing oil pan blocks are designed with O-rings and crush washers for leak-free performance. Any Sikky Manufacturing oil pan will need an oil pan block to redirect oil flow to a relocation kit. The oil pan blocks work great with an oil filter relocation and oil filter relocation block mount!
( 1 )
$79.79
Derale Performance temperature controlled sandwich adapter kits allow you to plumb an oil cooler without relocating the oil filter. Their bi-metallic spring diverts oil from your cooler until it reaches operating temperature.
( 23 )
$50.84
—
$80.28
These Summit Racing™ remote oil filter kits include a bypass adapter, filter mount, 8 ft. of oil hose, barb fittings, stainless steel hose clamps, mounting hardware, and instructions. These kits require a Fram PH8A or equivalent oil filter, which is not included.
( 188 )
$60.99
—
$74.99
Catch overflow the safe and track-legal way with our Summit Racing™ breather tanks. They are just what every racer needs to keep overflow from the power steering or dry sump oiling system off of the track. Each 1 qt. tank includes a reusable clamp-on breather, an AN inlet fitting, a drain valve, a plug, and mounting hardware. They are available in a choice of plastic or aluminum with a natural finish.
( 68 )
$81.99
Canton Racing remote oil filter adapters feature a unique design that permits the two 90 degree inlet and outlet ports to be rotated. This simplifies hose and fitting connections for all applications. They are machined from billet aluminum and come with all necessary hardware and O-ring seals.
( 63 )
$108.00
For a lubrication system that can keep up with your high performance engine, start by bolting on one of our Summit Racing™ oil pans. These steel pans are built by hand in America with power-supporting features like a directional windage screen, a trap door baffle for improved oil control, and a built-in crankshaft scraper. They also have magnetic drain plugs, 1/4 in. NPT dipstick fittings (dipstick not included), and a black powdercoated finish for rust prevention. Small Chevy pans are compatible with a 3 7/8 in. stroke, while big Chevy pans work with up to a 4 1/4 in. stroke.
( 102 )
$57.99
Lokar's Midnight Series direct-mount engine dipsticks are a part of their black stainless steel products, assembled with matching black anodized aluminum fittings. The slim design allows for mounting inside of your headers, and the flexible inner dipstick measuring cable gives you an accurate reading of engine oil level. Order the model designed to fit your vehicle and engine block application.
( 2 )
$50.95
AutoLoc black billet engine oil dipsticks feature a locking mechanism that eliminates the expulsion of the dipstick handle at pressure. These replacement dipsticks are built with a black stainless steel braided outer housing, a flexible inner dipstick cable to measure oil levels, and a black anodized aluminum handle and fittings to match the outer cable jacket finish. Whether you're using stock exhaust manifolds or installing a set of headers, AutoLoc flexible engine dipsticks are guaranteed to keep your dipstick handle locked in the correct position. Order the model designed to fit your vehicle application.
( 1 )
$84.95
Derale fluid control thermostats will reduce warm-up time, especially in cold weather, by allowing transmission fluid to bypass their cooler until the fluid temperature reaches 180 degrees Fahrenheit. These remote oil thermostats are built from aluminum, and are available in different configurations and fitting sizes. For underhood cooling accessories, trust the expertise of Derale Performance.
( 29 )
$94.71
An outstanding selection of Trick Flow® oil vapor tank components is available to help pre-clean crankcase ventilation gases before allowing them into the intake manifold. Single and dual billet aluminum separator kits include the black anodized tanks, hoses, and limiting fittings, while clamp-on breather fittings and attachments attach to the valve cover breather opening to reduce the amount of oil vapor vented from the crankcase. Get the components you need from the engine experts at Trick Flow®.
( 6 )
$65.99
—
$108.99
For your engine swap, use Advance Adapters oil filter relocation kits, which allow you to locate your oil filter where you want it for more convenient oil changes and increased clearance. These complete kits include everything you need for an easy installation: a spin-on adapter, a remote oil filter bracket, hoses, fittings, mounting hardware, and detailed instructions. They use 3/4 in.-16 threaded and Ford-type spin-on oil filters (not included).
( 14 )
$104.72
Large engines produce an enormous amount of heat, so Lingenfelter oil cooler adapter kits facilitate the installation of engine oil coolers on V8 models, primarily. They're machined from a single piece of 6061 aluminum, and are then anodized with a black hard coat for additional durability. Certain models include inlet and outlet fittings, along with ports for the oil temperature sensor and oil feed line. Lingenfelter kits are specifically designed to reduce oil pressure drop, compared with other designs on the market, and they retain the factory oil filter location. The gasket and bolts are included in your adapter kit.
( 6 )
$94.95
Peterson Fluid Systems offers several different scavenge filters to use on the suction lines of your oil pump. They will help protect your oil pump in the case of catastrophic engine failure. These filters feature a billet aluminum housing, durable anodized finish, and a coarse stainless screen element that still allows the pump to not have a restriction in flow. The inline dry sump filters are available in a variety of lengths, diameters, configurations, and inlet/outlet fitting sizes to accommodate countless applications.
( 2 )
$66.99
—
$105.99
Moroso oil filter block-off plates are designed for use with the Moroso dry sump oiling system or external oil pump. They are drilled and tapped to accept a 1/2 in. NPT fitting to provide increased clearance for installing an input pressure line. Mounting hardware and O-rings are included.
Not Yet Reviewed
$54.99
—
$92.99
True racing parts from Moroso! Oil filter aluminum bypass plates replace the engine-mounted oil filter in wet sump oiling systems and direct the oil to a remote oil filter or oil cooler. They're drilled and tapped for -10 AN O-ring inlet and outlet fittings, and include all mounting hardware, gaskets, and an O-ring.
( 3 )
$103.99
Having problems accessing your oil filter? Perma-Cool Cool-Tek oil filter relocation systems will move your filter to a more convenient location. The new arrangement could provide extra clearance for engine swaps and increased oil capacity. The oil filter mounting bracket accepts the stock oil filter—no need to change your type or brand. These relocation systems include a direct-fit spin-on adapter, a deluxe oil filter mounting bracket with dual ports, 8 ft. of high-temperature/pressure oil hose, and all fittings, clamps, and screws for a custom installation. Order the kit and options preferred for your vehicle.
( 1 )
$88.16
Moroso remote oil filter adapters are designed to plumb remote oil filters and oil coolers. The fitting direction is adjustable for the best clearance.
( 12 )
$108.99
Ford Performance Parts universal dipsticks fit engines utilizing a Canton or Canton-style racing oil pan. They attach via the 1/4 in. NPT (female) bung on your oil pan (male 1/4 in. NPT fitting on tube). You get the dipstick tube and dipstick, which can be bent to fit, depending on your application. Match-up your Canton-style racing oil pan with Ford Performance Parts universal dipsticks for a winning combination.
( 1 )
$60.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
