Availability
Showing In Stock Items. Show All 20 Items.
Peterson Fluid Systems standard drive mandrel pulleys fit the standard .625 in. mandrel. All of the pulleys feature a .625 in. bore and fit a 3/16 in. keyway. They are available in Gilmer and 8mm HTD tooth profiles. These oil pump pulleys are available in 1.020 in and 1.125 in. widths and each includes 4 set screws to keep them secured to the shaft. Peterson oil pump pulleys are precision machined from 6061-T6 billet aluminum and hard anodized for long-term wear resistance.
Not Yet Reviewed
$92.99
—
$121.99
Moroso dry sump oil pump pulleys are designed to give you optional ratios for your dry sump system to achieve that desired drive ratio. They are made from billet aluminum and feature a hard coat anodized finish for durability. Pulleys are available with several different tooth counts to achieve the ratio that you need.
( 7 )
$54.99
—
$108.99
Fluidampr offers dry sump pulleys for use with select Fluidampr harmonic dampers. These crankshaft accessories are used to drive a custom dry sump oil system on many applications, including Toyota inline 6-cylinder engines. The 5 7/8 in. aluminum pulleys are designed for 6-rib serpentine belts—and include three 3/8 in.-16 pre-drilled holes on 3.200 in. bolt circle.
Not Yet Reviewed
$74.78
Peterson Fluid Systems spline drive pulleys work with all Peterson spline drive components. They are offered in Gilmer and HTD teeth profiles, and feature the same great build quality from 6061-T6 billet aluminum with hard coat anodizing for durability and long life. Specifications: * Gilmer pulleys have a square tooth profile and are available in .560 in. and 1.020 in. widths * HTD pulleys have an 8mm round tooth profile and they are available in 1.020 in and 1.250 in. widths.
Not Yet Reviewed
$64.99
—
$69.99
Peterson Fluid Systems standard drive mandrel pulleys fit the standard 1 in. mandrel. All of the pulleys feature a 1 in. bore and fit a 1/8 in. keyway. They are available in Gilmer and HTD teeth profiles. Gilmer pulleys have a square tooth profile and are available in .560 in. and 1.020 in. widths. The HTD pulleys have an 8mm round tooth profile and they are available in 1.020 in. widths. Peterson Fluid Systems standard drive mandrel pulleys are precision machined from 6061-T6 billet aluminum and hard coat anodized for durability and long life.
Not Yet Reviewed
$59.99
—
$72.99
Moroso radius tooth belts fit radius tooth pulleys with 8mm pitch. They provide lower tension with positive engagement and no slippage. They also deliver higher power and torque transmission, improved meshing to reduce tooth jump, greater resistance to tooth shear, and reduced friction to extend belt life. The fiberglass cord is wound across the entire width of the belts to minimize stretching, and the belt body is made from a synthetic neoprene compound that resists heat, oils, ozone, and aging. Tough nylon fabric is bonded to the tooth surface for greater wear resistance.
Not Yet Reviewed
$50.99
—
$65.99
Continental PD heavy drive belts feature precision-molded teeth to deliver the power you need. Continental PD heavy drive belts are made from a specially compounded rubber, reinforced with high-strength fiberglass tensile cord members, and wrapped in a long-wearing nylon facing. They run smoother, quieter, and last longer. Continental PD heavy drive belts' specialized compound technology has excellent oil, heat, and ozone resistance, increasing durability and belt life in the harshest conditions. Designed to be used with machine tools, pumps, fans, presses, motor generator sets, etc.
( 1 )
$50.99
—
$96.99
These Moroso gilmer drive belts are designed to keep your accessory drive operating properly. They provide higher power and torque transmission, improved meshing to reduce tooth jump, greater resistance to tooth shear, and reduced friction to extend their life. The belts use a fiberglass cord wound across the entire width of the belts to minimize stretching. Moroso gilmer drive belts are manufactured from a synthetic neoprene compound that resists heat, oils, ozone, and aging. Tough nylon fabric is then bonded to the tooth surface for greater wear resistance.
( 5 )
$50.99
Continental ContiTech HY-T Plus V-belts are built with Vytacord tension members, which control stretch, so that it is minimal, predictable, and uniform. These belts feature a heat-and-oil-resistant rubber compound material that's designed to provide positive traction, maximum flexibility, and extended wear resistance. They're engineered for operating at higher speeds over small-diameter pulleys and short center distances. They are also great for use in multiple V-belt drive applications where high-shock load and heavy-duty loads are encountered. When it comes to longer belt life, quality materials are the key!
( 2 )
$50.99
—
$107.99
Conti V Dual (formerly, HEX) belts are designed for use on drives with one or more reverse bends to meet the multiple-bend and dual-power requirements. They often transmit power from both sides of the belt, making use of the specialty treated polyester tension members. They deliver maximum strength with minimum elongation and are available in AA, BB, CC, and CCP cross sections. The highly engineered materials in these belts deliver maximum performance over a long, trouble-free life. Don't settle for anything less than the precision engineered Continental Conti V dual (Hex) belts designed to provide perfect fit, form, and function for your application. Product features, items, and specifications include: * Construction layers include a fabric jacket, natural rubber, and polyester tension members * Dust-proof and moderately oil-resistant * Heat, ozone, and abrasion resistant * Working (outside) temperature range of -40 degrees C (-40 degrees F) to 140 degrees C (284 degrees F) * Anti-static in accordance with ISO 1813
Not Yet Reviewed
$50.99
—
$98.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
