Availability
Showing In Stock Items. Show All 13 Items.
Heidts rack and pinion extension kits are designed to extend the center portion of the Mustang II rack and pinion. They can also be used with wider Mustang II based kits to keep the steering geometry precise. Heidts rack and pinion extension kits include two 2 in. rack extensions, two extra-long bellows, and installation hardware. The kits are available for different thread sizes; be sure to measure the thread on your rack and pinion to determine the correct size.
( 3 )
$86.00
—
$102.00
Summit Bucks
Delphi steering pitman arms are designed with safety and precise fitment in mind. They're tested to the extreme for OE performance at every turn, withstanding temperatures below -40 degrees C and over 120 degrees C—as well as exposure to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensure the very best compatibility between the factory and aftermarket part. These durable steel pitman arms are available for a wide range of vehicle-specific applications.
( 2 )
$52.99
—
$104.99
Rough Country offers suspension lift kits for hundreds of trucks from 1980 and up—including models from Chevrolet, GMC, RAM, Ford, Jeep, Nissan, Toyota, and Dodge. Depending on the application, these kits enable you to raise the front and/or rear of your vehicle from 1.5 to 7.5 in. This is accomplished via component options such as steering knuckles, spacers, coil springs, leaf spring blocks, strut kits, and shackles. Suspension lift kits provide many benefits, including an aggressive stance, increased ground clearance, and plenty of ride height to accommodate larger tires. Installation varies from kit to kit; order the package recommended for your vehicle.
Not Yet Reviewed
$89.95
—
$99.95
Good pitman arms properly connect the steering gear and the steering linkage in two basic styles: wear and non-wear. ACDelco offers both with their Gold pitman arms. They provide the most stable pivot point with the least friction possible. Order the ACDelco Gold model designed for your application. Product features include: * Hot-forged arm for superior strength and durability * Precision-machined for better fit and performance * Cold-formed, heat-treated, machined stud * Permanently attached dust boot, where applicable * Corrosion-resistant coating for long life * Plated castle nut and hardware * Extensively tested for impact, wear, and fatigue resistance
( 6 )
$56.99
—
$94.99
ACDelco extensively tests their Silver tie rods to ensure they'll live up to the name. Backed by a substantial warranty, these steering linkage components offer quality and performance for budget-conscious customers. ACDelco offers them in various configurations and thread sizes for fitment on many specific vehicle applications. ACDelco Silver tie rod ends feature: * Full-ball type stud for improved performance * Coated for corrosion resistance * Heat-treated finished ball ends and CNC-machined housing * Manufactured at TS16949-certified facilities to ensure consistent high quality * Parts undergo extreme impact/wear fatigue testing
( 10 )
$56.99
—
$70.99
Artec Industries APEX raised heavy-duty track bar brackets are designed to take serious abuse and replace your front 30 or 44 JK factory track bar bracket. They are 1/4 in. thick, precision-cut and formed to outperform the competition. These mild steel brackets are for use only with APEX truss or no truss applications. They will NOT work with first generation Artec trusses. Features and notes: * Integrates with new APEX truss for JK. Not for use with Artec trusses prior to Nov. 2019 * Replaces factory bracket for those with 2.0 in. lift or higher * Lifts factory sway bar mount 1.75 in. * Adjusts roll center 3 in. higher for greater stability * Allows rotation of steering dampener to top side of tie rod for greater clearance * Improves ground clearance over factory brackets * This kit requires general welding and fabrication skills. Artec Industries implies no guarantees or warranties, and is not liable for improper installation. Some grinding and fitment may be required when installing this kit. Every axle varies slightly and some fabrication may be required. NOTE: These brackets offer raised track bar holes at 3.0 in. The brackets are for use with a drag link flip (which requires a new track bar, minimum 3.0 in. lift and bump stop extensions). These brackets have nothing to do with your lift amount. * If your lift replaces your track bar and mounts to the factory axle bracket (typical with a lift that includes an adjustable track bar), choose a stock height replacement bracket.
Not Yet Reviewed
$87.99
Summit Bucks
Delphi ball joints can make the difference between safely getting where you're going and a really bad day. These joints are used extensively for many OE and aftermarket steering systems. They're thoroughly tested in extreme temperatures, put through 720 hours of wicked salt spray, and driven over various terrains, ensuring top quality. Delphi ball joints use exacting dimensions and top-quality materials to ensure longevity and safety for all of your valuable cargo.
( 18 )
$50.99
—
$104.99
Clearance
Pro Comp suspension lift kit components include various parts needed for specific Pro Comp kits—either as replacement pieces, or for a la carte installation if you are assembling your own system. Depending on the component kit you order, the parts could include such items as: bushings, sleeves, tie rods, coil springs, steering link supports, brackets, hardware kits, leaf spring center pins, plates, sub assemblies, or more extensive packages which mirror portions of a complete Pro Comp suspension lift kit. Be sure to match the model numbers of the lift kit and lift kit components, so you will know exactly what is included in your order.
Not Yet Reviewed
$94.99
$59.50
URO Parts ball joints are another important segment of their extensive range of suspension components that help keep the luxury and performance in driving a fine European car or SUV. The sales volume of URO Parts suspension and steering parts creates manufacturing efficiencies that save you money, especially compared to OE parts. Every URO manufacturing facility is ISO 9000 certified; plus, all URO Parts ball joints are tested and inspected to make certain that each one meets or exceeds OE standards for fit, function, durability, and design.
Not Yet Reviewed
$106.99
Clearance
ACDelco Silver center links undergo extensive impact/wear fatigue testing to ensure that they meet the high-quality standards demanded of the ACDelco name—at a value price. Most feature a hot-forged design, case-hardened studs with rolled threads, compressed bushing material, and a greaseable design (where applicable) for easy maintenance and long life. The ACDelco Silver center links designed for your application provide constant torque pivot joints for improved performance and make an ideal choice for staying on budget.
( 5 )
$67.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
