Availability
OER Authorized disc brake spindles are available to replace worn-out originals on a wide variety of classic GM and Mopar vehicles. These spindles are for use on cars with factory disc brakes—or can be used to convert cars that originally came with drum brakes in the front. Most of the spindles have been long discontinued from the factory, so OER offers these accurate reproductions as direct-fit replacements—with no modifications necessary when using them with an OEM disc brake setup.
( 3 )
$69.99
—
$84.99
Wilwood ProSpindle steering arms are specifically designed for use in fabricated A-arm suspensions on kit cars, street rods, drag cars—and other custom or race applications configured around Pinto/Mustang ll suspension geometry. A redesigned one-piece forged steel body uses common Pinto and Mustang ll tie rod ends, ball joints, wheel bearings, and seals. It's lightweight yet nearly 3x stronger than OE or aftermarket 2-piece cast iron and steel replacement spindles. The 2 in. dropped spindle pin provides the desired lowered ride height without disturbing the suspension geometry. Bolt-on steering arms are strong and can be reversed to accommodate rear steer configurations. They also allow the same spindle to be used on either side of a vehicle. Bolt-on caliper brackets attach to substantially reinforced mounting bosses on the spindle body for secure, deflection-free mounting of 4- or 6-piston calipers.
Not Yet Reviewed
$105.81
When it comes time to update your vehicle's tie rods, make the fix easy and quick with Classic Performance Billet tie rod adjusting sleeves. These hexagonal aluminum pieces are lighter and easier to adjust than their stamped steel cousins. They leave no crevices for water to get into, and their locking jam nuts are easily tightened. Classic Performance Billet tie rod adjusting sleeves make it easy to get lengths right.
( 9 )
$68.99
Clearance
Unity Automotive complete strut assemblies include all the components required for a strut replacement in a single, fully-assembled unit. All the parts feature OE design, and they're pre-assembled—a breakthrough that saves on installation time by eliminating the safety hazards associated with coil spring decompression. Every assembly features application-engineered valves to optimize each vehicle's unique ride and handling characteristics. Exceed your original equipment standards with the Unity Automotive complete strut assembly designed to fit your application.
( 49 )
$90.99
—
$109.99
Classic Performance ECONO Line spindles will work with original disc brakes, as well as Classic's popular Big Brake Kits. They are great replacements and allow the use of stock steering arms and the factory single piston disc brakes.
Not Yet Reviewed
$96.99
Summit Bucks
Coil springs play a leading role in your driving comfort and safety. Working together with your shocks, these suspension components provide needed support and stability over bumpy surfaces and around sharp corners. Moog coil springs are some of the finest replacements available when you notice a decline in handling and braking efficiency. They're constructed from high-quality steel and coated with a black, vinyl, or powdercoat finish to resist rust and corrosion. Moog offers hundreds of sizes and styles to fit a full spectrum of cars, trucks, vans, and SUVs--both front and rear.
( 570 )
$51.99
—
$215.99
Energy Suspension leaf spring bushings put you in better control of maneuvering turns, drag-style launches, and sudden braking. These high performance replacements are made of polyurethane—which is stiffer and stronger than rubber, but not as hard as solid metal bushings. Energy Suspension bushings add a higher level of performance and durability, and you'll feel the difference in positive handling and control.
( 474 )
$50.19
—
$109.81
Summit Racing™ Engine Travel Limiters provide you an affordable complete kit to keep that engine where you mounted it. When using motor plates, the engine may try to move forwards or backwards in the chassis under hard acceleration or braking which could create binding and other problems. These travel limiters bolt to a plate on the engine block and give you a diagonal link to the frame rail that positively locates the engine to keep it from flexing the motor plates. These comes unassembled and include all necessary tabs and hardware. Welding and fabrication skills are required.
( 1 )
$107.99
Improve the handling and ride quality of your vehicle with Energy Suspension frame shackle bushings. These small but vital components are manufactured from polyurethane material that's resistant to oil and other road contaminants, unlike rubber stock bushings. Energy Suspension leaf spring shackle bushings provide a higher degree of performance and durability to better maintain control for maneuvering through turns, over bumps and berms, and for braking.
( 36 )
$96.44
—
$108.68
Classic Performance offers forged steering arms for a wide range of applications, from the 1950s, '60s, and '70s. They're shaped to look and perform just like your originals—without having to grind them down—when you pair them with a Classic spindle and brake kit. Don't waste time modifying your stock arms; order the replacements recommended for your vehicle.
( 10 )
$78.99
—
$88.99
By installing a taller set of RideTech ball joints, you reposition the control arms to dramatically improve the OEM camber curve and give your car a much more stable feel through the corners. Why taller ball joints? OEM muscle car front suspension geometry usually creates positive camber when cornering. This means that the loaded tire leans away from the turn--a huge compromise in cornering performance and feel. Ridetech ball joints help optimize handling with real-world street tires that will see thousands of highway and backroad miles. They are direct replacements for OEM ball joints and are easy to install--no cutting, welding, or fabrication is required, as well as no modifications to the fuel lines, brake lines, or exhaust.
( 15 )
$60.00
Summit Bucks
Moog replacement leaf spring shackles provide you with better control when braking or maneuvering through turns. These suspension components are constructed from high-quality materials to ensure that they meet or exceed OE standards. Give yourself the positive feel of better handling with a new set of Moog replacement leaf spring shackles.
( 8 )
$51.99
—
$100.99
On Sale
Control arm bushings are important links in your automotive suspension system, and these Whiteline control arm bushings utilize cutting-edge polyurethane to provide stability and even braking efficiency. They are combined with effective designs, such as the internal bore kurling and grease retention lips for maximum lubrication and performance. In short, new bushings can improve your vehicle's handling, steering feedback, and more. Whiteline has a vast array of control arm bushings for front/rear, inner/outer, upper/lower, and caster or camber correction. Select the control arm bushings that fit your vehicle's specs—and stabilize that chassis!
( 13 )
$71.88
—
$160.88
$50.32
—
$112.62
These Competition Engineering engine limiter kits mount diagonally between the engine block and the frame rail, preventing the forward and rearward movement of the engine during launch and braking conditions. Without these kits, the movement of the engine within the chassis could cause the front and rear motor plates to flex and crack. Two kits are recommended for high-horsepower race applications, with one positioned on either side of the engine.
( 2 )
$90.99
Pete and Jake's Hot Rod Parts offers Super Bell Slingshot steering arm to finish your steering the right way. These chassis components work with aftermarket and Super Bell spindles, as well as Super Bell Mustang disc brake kits and stock 1939-48 Ford brakes.
( 2 )
$68.99
CA offers strut rods for a variety of applications, including Ford Mustangs from the 1960s and '70s, and Chevy Corvettes from the 1960s, '70s, '80s, and '90s. These replacements attach the control arm and frame of your car's suspension system, helping the suspension return to normal after braking or accelerating. The components are machined from steel with a black painted finish; and many kits are adjustable and/or include hardware. Each strut rod meets or exceeds OE specifications and quality. Select the model with options designed for your vehicle. Sold individually for left or right side, or in kits for both sides.
( 1 )
$67.99
—
$99.99
Make OMIX-ADA your number-one source for direct OE replacement Jeep parts and accessories built to the original specifications. The steel spindles are available to fit either the driver or passenger side on select Jeep models equipped with front disc brakes only.
( 2 )
$89.99
—
$100.99
Energy Suspension offers front subframe bushing sets for a variety of classic vehicles. As a world leader in performance polyurethane suspension technology, Energy Suspension's front subframe bushing sets proprietary Hyper-Flex material delivers many needed benefits to your subframe. Unlike OEM rubber bushings, these durable Hyper-Flex components stand up well to contaminants that often destroy rubber and have been engineered to give longer-lasting performance and not compress permanently. Whether domestic or import, old or new, vehicles will achieve that level of performance that has made Energy Suspension the most asked-for name in high performance suspension components. Product features and benefits: * Incredible improvement in control * Maintains proper caster and camber alignment * Increase in handling and control * Greatly reduces wheel hop on quick acceleration * Even braking control is improved * Better suspension stability
Not Yet Reviewed
$115.98
On Sale
Whiteline trailing arm bushings are produced using the latest technology in polyurethane, along with effective designs, like the internal bore knurling and grease retention lips, for optimum lubrication and performance. Worn-out bushings have a huge influence on vehicle stability, steering precision, and braking efficiency. Replace worn bushings utilizing Whiteline's advanced synthetic elastomer bushings with core characteristics ensuring superior elasticity, memory, and outright durability for all forms of driving applications.
( 7 )
$77.88
—
$139.88
$54.52
—
$97.92
Nolathane control arm bushings feature characteristics to ensure superior elasticity, memory, and outright durability to provide a safer, more predictable vehicle. Made from the highest quality polyurethane, they are designed to improve vehicle stability, handling, braking control, and alignment. Synchronize your suspension system for optimal safety with Nolathane control arm bushings.
( 7 )
$50.87
—
$109.87
Nolathane strut rod bushings are an ideal replacement for your stock and/or worn suspension links. Like all Nolathane replacement bushings, they provide outstanding abrasion resistance, high load bearing capability, flexibility, and increased tensile strength—plus chemical resistance to oil, grease, ozone, and weathering. Order a set of Nolathane strut rod bushings for an overall more enjoyable ride. Benefits include: * Enhanced road holding, steering, and performance * Less change in suspension geometry under load, braking, and through corners * Longer suspension life and less repair time * Longer tire life * Available for various positions (standard and heavy-duty)
Not Yet Reviewed
$63.20
—
$94.87
Be in control of your suspension while maneuvering through turns, doing drag-style launches, and braking. Nolathane high performance leaf spring bushings are made of a polyurethane, which is harder and stronger than rubber, but still not as harsh as solid metal bushings. These bushings add a higher level of performance and durability, and you'll feel the difference in positive handling and control.
( 12 )
$53.87
—
$134.00
Clearance
Mopar Replacement tension rods locate your control arms during suspension travel, as the tension rods rotate about the bushing and basically brace the control arm. With wear, they will leak, and the bushings themselves will fall apart. The tension rods keep your wheels from moving forward or pulling to one side when braking. Mopar Replacement rods will eliminate even a small amount of play and give your suspension a more solid feel when either braking or turning.
Not Yet Reviewed
$222.99
—
$244.99
$82.50
—
$86.50
Worn C-bushings can cause unwanted changes in drivability, handling, and alignment settings. This can make your vehicle unbalanced when braking, less predictable while cornering, and cause uneven tire wear. Replace those worn factory bushings with Nolathane C-bushings. They come in a variety of caster-correcting offsets from 2 degrees up to 7 degrees to accommodate vehicles with over 4 in. of lift. Nolathane C-bushings are made of the highest quality polyurethane and synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance.
Not Yet Reviewed
$79.87
—
$89.87
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
