Availability
Nitrous Express throttle position activation switches are more durable and contain short circuit protection not found in other similar products. Constructed to work with most EFI vehicles, these switches are designed to trigger a relay at 1/2 amp max current draw, at or near wide open throttle.
( 7 )
$52.87
Nitrous Express offers a full range of switches and electronics for your nitrous system. These wide-open throttle switches are designed to be mounted underneath your gas pedal that releases the nitrous when you go to wide-open throttle.
( 13 )
$58.69
Nitrous Express handle bar switch mounts give you fingertip control of various accessories on your motorcycle, ATV, snowmobile, or personal watercraft. Whether you're activating nitrous oxide, headlights, turn signals, or other accessories, these convenient mounts include one on/off switch and one on/off/on switch. Made from quality billet aluminum, the switch mounts are offered in right or left offset versions, for either 7/8 in. or 1 in. handle bars. Order the model preferred for your application.
Not Yet Reviewed
$87.91
Nitrous Express activation switch brackets are made of high-quality steel and have a natural finish for long-lasting performance and durability. They include a universal wide-open throttle switch bracket and mounting hardware. If you're looking for high-quality brackets, look no further than Nitrous Express.
( 7 )
$52.87
Clearance
Dorman EGR vacuum switching valves are designed to inhibit EGR operation during conditions where it could adversely affect engine performance and vehicle drivability. They can be either normally open or closed and installed in series between the vacuum modulator and EGR valve, or installed on a second port on the EGR valve. Dorman EGR vacuum switching valves control an atmospheric bleed, which inhibits EGR operation any time a given set of ECM parameters is met.
( 2 )
$51.95
—
$100.99
These NOS single stage electric pack wiring kits have everything that you need to properly wire an NOS single stage nitrous oxide kit. They include a microswitch and bracket, activation switch, relay, harness, and the necessary connectors for a trouble-free nitrous installation.
Not Yet Reviewed
$105.95
Hella EVAP canister purge valves serve as part of the emission control system and measure the flow and amount of fuel vapor that is recycled in the combustion process via the charcoal canister, or fuel vapor storage device. They are made from durable materials and install in the factory location.
Not Yet Reviewed
$66.99
These Standard Motor Products fuel tank selector valves are designed to connect your fuel lines to the separate tanks and hook up your electric switch. They are manufactured from quality materials and install in the stock location for a direct fit.
( 19 )
$66.99
—
$80.99
Tanks Inc. gas or fuel tank switchover valves are available to replace lost or broken selector valves. Tanks Inc. allows you to run two separate fuel tanks and only draw off of one tank at a time. You would run one fuel line from each tank to the valve, and a line from the valve to your engine. The valves have a 3-port design and work on all 12 V negative ground systems. Switching requires a toggle switch, also available.
( 6 )
$55.99
Nitrous Express remote nitrous bottle valve openers save you a trip to your trunk! Are you still getting out of your car to open your nitrous bottle? Or, maybe you already have a remote setup, but need a new motor? These Nitrous Express remote nitrous bottle valve openers offer just the motor to keep you inside of your car. Flip the switch (not included), and you're ready to blast off!
( 1 )
$74.21
ICT Billet fuel rail block-off plates are designed to replace direct injection fuel rails, commonly used when switching to port injection. They are made from aerospace grade billet aluminum and are compatible with all V8 GM LT Series engines 2014 and newer. These fuel rail block-off plates can be used with a stock valley cover or ICT valley pan (551168 and 551171 models) and include two plates, along with the correct mounting hardware.
Not Yet Reviewed
$58.99
On Sale
Aeromotive Smart relay controllers provide modern safety and convenience. They can be used in any application where a traditional relay may be used, but require a user-defined turn-on point between 0 to 5 V. Smart relay controllers are available in single and dual channel versions with or without a standalone MAP sensor. No other pressure/Hobb's switches are needed, and each channel is rated at 40 amps. Select the Aeromotive Smart relay controller best suited for your fuel system setup.
( 1 )
$100.75
$90.68
Holley Dominator billet fuel pump conversion end plates are kits to convert your Dominator and VR Series fuel pumps from single-to-dual inlet and from dual-to-single inlet to match your needs. Each of these Holley kits include a billet aluminum end housing, fuel screens, O-rings, and instructions to make the switch easy. Just select the kit for your pump and your desired inlet configuration.
Not Yet Reviewed
$90.39
Lingenfelter regulator plugs are designed to block off the internal fuel pressure regulator in the driver's side fuel tank when converting to an external fuel pressure regulator. These fittings are required to install an external fuel pressure regulator when your fuel system will run at reduced fuel pressures below 54 psi. They're also needed when your fuel system will be running the stock 58 psi fuel pressure but you're converting to a vacuum referenced regulator. The vacuum referenced system will drop below 54 psi of fuel pressure at idle, cruising, or under deceleration. When the fuel pressure drops below 54 psi, the transfer pump from the passenger side tank will no longer correctly function and will fail to transfer fuel. This situation will reduce the vehicle range and fuel system capacity. Since this transferred fuel also helps keep the canister full in the driver side tank, it may also cause the vehicle to lose fuel pressure under high power conditions. Order the block-off plug recommended for your vehicle. Additional notes: * Lingenfelter fuel pressure regulator block-off plugs are precision CNC-machined from aluminum and then anodized blue for added durability * General Motors switched the C5 Corvette fuel systems over to the C6 Corvette fuel system design halfway through the 2003 model year. Corvettes with the last 6 digits of the VIN being 114930 or higher were produced November 25, 2002 and later and have the new C6 style fuel system * These regulator block-offs should be used in conjunction with the Lingenfelter passenger side fuel tank block-off fitting
Not Yet Reviewed
$58.85
When it's time to replace the vacuum switching valve on your EVAP system, Dorman vacuum solenoid valves are engineered to be better than the original design. The durable metal and plastic construction is designed for long-lasting resistance to harsh road and weather conditions.
( 1 )
$76.95
Motion Pro Armor Coat throttle and idle cables feature attractive stainless steel weave casings and protective clear Armor Coat that guards chrome and painted surfaces against damage. These Motion Pro cables also feature premium chrome fittings and PE liners for durability and smoothness. Select the cables designed for your motorcycle.
Not Yet Reviewed
$57.19
—
$106.99
Carter inline electric fuel pumps are quality replacements to deliver fuel at the precise pressure and flow rate your vehicle demands. With a low amp draw, high free-flow, and consistent fuel pressure, these pumps will keep your engine well-fed. Universal and vehicle-specific models are available.
( 80 )
$51.99
Summit Bucks
ACDelco GM Genuine Parts vapor canister purge valve pipes are available in dozens of configurations for fitment on a wide range of vehicles, including many Chevrolet, Buick, GMC, and Cadillac models. A key part of the evaporative emissions vapor canister, these replacement pipes are manufactured from factory-style materials and specifications to ensure proper fitment and long-lasting performance. Order the purge valve pipe recommended for your application.
( 1 )
$77.99
—
$85.99
Keep your car on the road and healthy with the help of Dorman and these vapor canister vent valves. Your EVAP system is important to keeping your car running at its best, so don't neglect a simple fix. These evaporation canister vent solenoid valves are direct replacements for the original part, so fit and function will never be a problem. Don't put off fixing an important part of your car's emission system when Dorman has the right parts for you.
Not Yet Reviewed
$52.99
Dorman vapor canister purge solenoids control the flow of vapors from the EVAP system to the intake manifold. Normally open, they are pulse-modulated by the control module to precisely control the flow of fuel vapor to the engine. The solenoids can also be opened during some portions of the EVAP testing, allowing engine vacuum to enter the EVAP system. These replacements are designed for a variety of specific vehicle applications.
( 17 )
$71.99
—
$87.95
Dorman fuel vapor canister purge valves serve as part of the emission control system and measure the flow and amount of fuel vapor that are recycled into the combustion process via the charcoal canister, or fuel vapor storage device. Available for a range of applications and manufactured from premium materials for a long service life, these fuel vapor canister purge valves are engineered for a perfect fit and are a direct replacement for the original equipment purge valve. Order the model for your application needs.
( 22 )
$51.09
—
$97.78
Dorman fuel vapor vent solenoids serve as part of the emission control system and measure the flow and amount of fuel vapor that are recycled into the combustion process via the charcoal canister, or fuel vapor storage device. Available for a range of applications and manufactured from premium materials for a long service life, these fuel vapor canister vent solenoids are engineered for a perfect fit and are a direct replacement for the original equipment. Order the model for your application needs.
( 18 )
$70.99
Summit Bucks
ACDelco offers vapor canister purge valve pipes for a wide range of vehicles, including many Chevrolet, Buick, GMC, and Cadillac models. These replacement pipes are a key component of the evaporative emissions system, which allows fuel vapors to be burned off by the engine rather than polluting the atmosphere. The OE pipes are manufactured from factory-style materials and specs to ensure proper fitment and long-lasting performance. Order the model recommended for your application.
Not Yet Reviewed
$76.99
These Turbosmart e-Boost 2 boost controller accessories have all been engineered to help you use the e-Boost 2 boost controller with ease. The Turbosmart e-Boost 2 boost controller is a complete boost management system with state-of-the-art software. Get your Turbosmart e-Boost 2 boost controller accessories for the one thing every turbocharged car owner should have.
Not Yet Reviewed
$51.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
