Availability
Showing In Stock Items. Show All 91 Items.
The GM LS Series engines are being built for a lot of different performance and racing applications. You can see good ol' hot rodder ingenuity taking place as racers are running carburetors and even using distributors on these engines! These MSD LSx trigger converters plug into the factory crank sensor of an LS engine. They then convert the factory trigger signal into a 12 V square wave signal to trigger an MSD ignition control such as a 6 or 7 Series ignition control. If you are incorporating a front mount distributor into your LS engine, this means that you won't need to run an external crank trigger.
( 3 )
$52.69
Fluids used in automobiles work to keep your vehicle running while adversely affecting the seals designed to contain them. Whether you're adapting fuel logs for new carburetors or replacing worn O-rings, Aeromotive rebuild kits have the components you'll need. Designed for specific kits (see the "Notes" section of the product "Overview"), Aeromotive Fuel Log Rebuild Kits provide the O-rings and parts necessary to stop leaks and bring your motor back to life!
Not Yet Reviewed
$79.00
Edelbrock electric chokes kits are designed to give you reliable starting in all weather conditions. The kits include all necessary parts to convert your carburetor into an electric choke operation.
( 117 )
$97.95
—
$132.95
Summit Racing™ Turbo adapters help you get that Turbo mounted quickly and right the first time. Made from cast stainless steel with thick warp free flanges, they allow you to convert from a v-band to a flange or a flange to a v-band. Available in straight or 90 degree they feature smooth internal shapes for maximum flow and sealing.
( 5 )
$50.99
—
$70.99
Moroso air cleaner bases are bottom sections with a special purpose. They convert Moroso, and other 14 in. x 3 in. air cleaner assemblies to a "raised bottom design" that clears Edelbrock 4-barrel carburetors, and Holley carburetors with tall throttle return spring brackets. They feature aluminum construction with a deep retaining lip that locks the air cleaner element in place. Moroso air cleaner bases can be polished, painted, powdercoated, or chrome painted for a custom look.
( 4 )
$58.99
AED offers a choice of accelerator pump kits to suit your needs. In cases where you need additional total squirter volume (big carburetor, tight converter, heavy car), AED pump kits come complete to provide the additional volume.
( 5 )
$64.99
Steeda ProFlow blow-off valve adapters give your engine the sound to match its performance. These adapters will convert your factory re-circulation valve into a blow-off valve, giving it the iconic turbo sound! CNC-machined in-house from aerospace-grade 6061 billet aluminum, ProFlow BOV adapters are easy bolt-on parts that require no modification or tuning. On high-boost applications, they also help to prevent turbo surge, by allowing the pressure to vent to the atmosphere. The adapters are available for fitment on a variety of Ford Mustang and Fusion vehicles from 2015 and up. Benefits include: * Releases excess boost pressure to the atmosphere * Converts the factory re-circulation valve into a blow-off valve * CNC-machined 6061 billet aluminum * Bolt-on installation * No modification or tuning required
( 6 )
$99.95
On Sale
JET adjustable TPI fuel pressure regulators enable you to obtain maximum efficiency and horsepower gains in a tuned port injection system. Unlike other designs, these JET regulators incorporate a steel insert on the adjuster to avoid stripping. Convert your factory regulator to an adjustable-style TPI fuel pressure regulator for the performance you demand!
( 3 )
$119.96
$107.96
Quick Fuel offers carburetor adapters designed to convert from a spread bore to a square bore carb flange. These cast aluminum adapters will allow any 4150 or 4160 style carb to be mounted on manifolds designed for Rochester Quadrajet or Carter Thermoquad carbs. Get your carburetor mounted properly using one of these Quick Fuel carburetor adapters.
( 1 )
$99.95
Aeromotive fuel log conversion kits are ideal for efficiently converting Aeromotive dual-action carbureted fuel logs for proper use with Ultra HP or Demon-style fuel logs. They use replacement stand-offs for various other carburetors equipped with a different thread in the float bowl. These kits also work as repair/replacements for existing stand-offs on Ultra HP or Demon-style fuel logs. Aeromotive fuel log conversion kits include new stand-offs, plus all the required O-rings and seals.
Not Yet Reviewed
$79.00
These Mr. Gasket Street Scoop conversion kits will allow your scoop top fit a variety of induction styles. They are available to convert the single Street Scoop to a dual carburetor setup, or a dual Street Scoop to a single 4-barrel application. The conversion kits come with all necessary mounting hardware and instructions.
( 4 )
$87.15
Convert your X1 regulator for use with a different fuel system, using one of these Aeromotive X1 fuel pressure regulator conversion kits. They are available in your choice of seat sizes and pressure range springs to fit your fuel system requirements.
( 1 )
$95.45
Are you finding that the GM LT Series installation kit lacks some critical small parts to install the fuel system? VaporWorx is here to help. Aeromotive VaporWorx LT engine installation full kits provide exactly what you need to get the job done. Included: * Adapter fitting to convert the GM fuel module outlet to 6 AN * A 45-degree F-F swivel to start the turn to the side of the car * A 6 AN M-M union with an 1/8 in. NPT female thread on the side * Brass VaporWorx fuel pressure sensor adapter to attach the GM fuel pressure sensor. (M10 x 1mm O-ring thread to 1/8 in.-NPT male thread) * Genuine Delphi fuel module electrical plug kit
Not Yet Reviewed
$65.75
The heart of a fuel system begins with the fuel tank. When building a fuel system, swapping a carburetor, or converting to EFI, it is crucial that you do not contaminate your new parts with dirt, rust, and sludge from an old fuel tank. Holley Sniper EFI fuel tank filler necks are just some of the many replacement fuel tank components offered as a simple and inexpensive solution to alleviate fuel tank issues. They are designed to meet or exceed the quality of your factory components and are the perfect companions for your carbureted powerplant or a perfect base for your EFI conversion when installing one of the Holley Muscle Car EFI modules or Retrofit EFI pump. Holley Sniper EFI fuel tank filler necks have a galvanized finish for corrosion protection.
Not Yet Reviewed
$53.25
Holley Dominator billet fuel pump conversion end plates are kits to convert your Dominator and VR Series fuel pumps from single-to-dual inlet and from dual-to-single inlet to match your needs. Each of these Holley kits include a billet aluminum end housing, fuel screens, O-rings, and instructions to make the switch easy. Just select the kit for your pump and your desired inlet configuration.
Not Yet Reviewed
$90.39
Lingenfelter regulator plugs are designed to block off the internal fuel pressure regulator in the driver's side fuel tank when converting to an external fuel pressure regulator. These fittings are required to install an external fuel pressure regulator when your fuel system will run at reduced fuel pressures below 54 psi. They're also needed when your fuel system will be running the stock 58 psi fuel pressure but you're converting to a vacuum referenced regulator. The vacuum referenced system will drop below 54 psi of fuel pressure at idle, cruising, or under deceleration. When the fuel pressure drops below 54 psi, the transfer pump from the passenger side tank will no longer correctly function and will fail to transfer fuel. This situation will reduce the vehicle range and fuel system capacity. Since this transferred fuel also helps keep the canister full in the driver side tank, it may also cause the vehicle to lose fuel pressure under high power conditions. Order the block-off plug recommended for your vehicle. Additional notes: * Lingenfelter fuel pressure regulator block-off plugs are precision CNC-machined from aluminum and then anodized blue for added durability * General Motors switched the C5 Corvette fuel systems over to the C6 Corvette fuel system design halfway through the 2003 model year. Corvettes with the last 6 digits of the VIN being 114930 or higher were produced November 25, 2002 and later and have the new C6 style fuel system * These regulator block-offs should be used in conjunction with the Lingenfelter passenger side fuel tank block-off fitting
Not Yet Reviewed
$58.85
On Sale
These K&N powersports performance air filters are ideal for extended use in dirty and dusty off-road riding and provide clean carburetion, even at high altitudes. As a rule, no jet changes are required with just a K&N filter element. K&N powersports performance air filters are washable and reusable and provide for high airflow with excellent filtration.
( 86 )
$68.99
$55.19
Restore the maximum airflow to your HSR42/45/48 carburetor with quality direct replacement HSR K&N air filters from Mikuni. These genuine K&N air filter elements feature correct pleating and have a clamp-on design for a hassle-free installation.
Not Yet Reviewed
$93.99
Kuryakyn Mesh gas caps are a low-profile vented cap that gives the tank on your bike some attitude. Indented grooves around the perimeter provide easy removal and installation. They include an aluminum outer frame and baseplate with steel mesh insert. Kuryakyn Mesh gas caps create a unique three-piece design that can be disassembled for custom-painting individual components to match your Harley®.
Not Yet Reviewed
$96.99
Kuryakyn vented pop-up flush mount gas caps have a clean low-profile design for that uncluttered appearance. Crafted from billet aluminum, these gas caps have a brilliant chrome finish. They feature a built-in trim ring that protects the surface around the filler opening from dings. These are exact replacement for screw-in type tanks that require a vent; order the model recommended for your bike..
Not Yet Reviewed
$84.99
Optimize the tuning of your constant velocity carburetor with Twin Power recalibration kits. These CV carburetor kits increase power in the midrange and top-end, while maintaining satisfactory fuel economy. Recalibration will help cure some of the common problems--throttle flat spots, backfiring, and poor throttle response. They are offered in a choice of kits, with or without gaskets and seals, but both include a main jet assortment (150, 160, 170, 180, and 190) and instructions for precision tuning. Get consistent performance from your CV carburetor with Twin Power recalibration kits.
Not Yet Reviewed
$73.71
HardDrive mounting bracket/breather kits are especially useful when installing an aftermarket air cleaner on a Harley-Davidson®. These steel accessories have a chrome or black finish, and are available for models as far back as the early '90s. Select the HardDrive air cleaner mounting bracket/breather kit designed to fit your bike—then marvel at the newfound performance achieved with an updated filter system.
Not Yet Reviewed
$69.26
—
$92.66
Performance and reliability start with All Balls Racing. Their fuel pump kits offer an economical solution to restore the performance of a non-functioning OEM fuel pump module. Each kit includes all the necessary components, from the necessary pump and filter to hoses and clamps as needed for your model. Rebuild your fuel pump with a kit from All Balls Racing. Select the kit designed for your off-road or street machine.
( 3 )
$69.67
If your vehicle spends the majority of its time on the street, and you desire to maximize airflow, then aFe Pro Dry S air filter elements are your best bet. These synthetic oil-less filters feature multiple layers of progressive media for optimum filtration and flow, even when dirty. The filters bump seals eliminate the need for sealants or gaskets since they conform to the filter housings and always return to their original form. Full 360-degree urethane frames allow proper OE fitment and strength. These air filter elements are available in a variety of styles and sizes for countless applications. For more airflow, and less mess, order the air filter element for your application needs.
( 121 )
$76.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
