Availability
Showing In Stock Items. Show All 44 Items.
Summit Racing™ offers direct-fit fuel tank straps for a variety of applications, including many Chevy and GMC trucks from the 1940s, '50s, '60s, '70s, and '80s. These high-quality replacements are made from factory-style materials and specs to ensure proper fitment and long-lasting durability. Secure your original or updated fuel tank with the correct support straps from Summit™.
( 4 )
$63.99
Mount and secure your gas tank with Key Part fuel tank hangers. Available in front and rear hanger versions, they are built with premium quality materials and designed to look and fit just like the originals they are replacing.
( 3 )
$69.99
BBK oxygen sensor extension harness sets are direct plug-in designs to prevent the cutting and lengthening of your oxygen sensor wires. They are ideal for full-length headers and other specific applications.
( 45 )
$69.99
The GM LS Series engines are being built for a lot of different performance and racing applications. You can see good ol' hot rodder ingenuity taking place as racers are running carburetors and even using distributors on these engines! These MSD LSx trigger converters plug into the factory crank sensor of an LS engine. They then convert the factory trigger signal into a 12 V square wave signal to trigger an MSD ignition control such as a 6 or 7 Series ignition control. If you are incorporating a front mount distributor into your LS engine, this means that you won't need to run an external crank trigger.
( 3 )
$52.69
On Sale
Nitrous Outlet offset solenoid mounting brackets are specifically designed for carbureted or carbureted-style EFI intakes with a 4500 flange. Two solenoids mount in the front and rear of the intake offset on either side. They are built strong enough to withstand engine vibration to keep your solenoids securely in place, while giving your system a custom-anodized, show-quality finish. Nitrous Outlet offset solenoid mounting brackets are designed to place the solenoids slightly lower than the intake inlet and are good for use with the Nitrous Outlet Puck, spraybar, and single-nozzle systems.
( 2 )
$62.99
—
$72.99
$53.54
—
$62.04
On Sale
Nitrous Outlet solenoid center-rear mounting brackets are specifically designed for carbureted or carbureted-style EFI intakes with a 4150 flange. These brackets hold two fuel and two nitrous solenoids in the rear center of the intake, keeping the solenoids out of the way of fuel logs or anything else that may be on the front side of the intake. Nitrous Outlet solenoid center-rear mounting brackets are designed to place the solenoids slightly lower than the intake inlet, and are good for use with the Nitrous Outlet dual stage systems and dual nozzle systems.
( 1 )
$60.99
—
$61.99
$51.84
—
$52.69
Standard Motor Products fuel injectors help you attain maximum fuel efficiency and power from your engine. Properly operating injectors are essential components for enabling your vehicle to run flawlessly. These OEM stock replacements are available for hundreds of specific applications. Don't drive with faulty fuel delivery. Update worn or malfunctioning fuel injectors with reliable models from Standard Motor Products.
( 247 )
$97.99
Trans-Dapt Performance throttle body to carburetor adapters allow you to mount an OEM or Holley TBI unit on almost any manifold, saving you the expense of buying a different manifold. Made from high-quality material, these adapters provide a smooth transition from the throttle body to the intake manifold for trouble-free operation.
( 48 )
$66.99
On Sale
The heart of a fuel system begins with the fuel tank. Secure your tank in place with Holley Sniper fuel tank straps. Available in many styles and shapes to fit a variety of applications, they are made from steel and galvanized for corrosion protection and continued good looks. Holley Sniper fuel tank straps provide a simple and inexpensive solution to alleviate fuel tank issues.
Not Yet Reviewed
$95.15
On Sale
Get connected with Holley EFI Coyote throttle body adapters! These adapter plates have a cast aluminum construction that's more durable for boosted applications, can be welded for modifications, and they are available in your choice of natural or black finishes. Choose the model for your application. Whether you're engine swapping your classic car or need to manage 4000 horsepower in your twin-turbocharged drag radial race car, Holley EFI has the solutions you need to get your project up and running better than ever!
( 1 )
$179.95
$98.95
On Sale
Holley LS steam vent kits prevent hot spots or overheating. Designed to eliminate trapped air and steam from your engine, these complete kits are available to plumb your engine and include the appropriate hose and hose ends to make installation a breeze. They are more attractive than the OEM lines and offer increased flexibility when using aftermarket intakes and other accessories on your performance vehicle. Holley LS steam vent kits may feature: * Adjustable pivoting steam vent adapters * Black push-on or stainless braided Speed-Flex hose and hose ends * Available in front or 4-corner plumbing options
( 11 )
$62.45
aFe Dynamic air scoops deliver high-speed airflow to improve your vehicle's performance and throttle response. The scoops are available in lightweight powdercoated aluminum for a clean appearance, as well as plastic and a high-gloss, clearcoated twill weave carbon fiber that offers great strength, less weight, and aggressive looks. Any of the aFe choices install easily with the necessary hardware included—and will lower intake air temperatures by forcing more cool air from your front grille into your intake system. The scoops are available in a variety of configurations for fitment on specific vehicle applications.
( 11 )
$54.00
—
$99.00
CSR head mounted fuel pressure regulator brackets are designed for use with all BG and most other regulators. They install on the front/rear or left/right side for big block heads and driver side front or passenger side rear on small block heads. These head mounted fuel pressure regulator brackets include spacers and bolts.
Not Yet Reviewed
$57.96
On Sale
Nitrous Outlet Hydra wet nitrous nozzles feature a multi-discharge design made for EFI applications where a nitrous plate is not available, or may not fit. These nozzles measure 2 3/4 in. long to put the multi-discharge directly in front of the opening of the intake. The multi-discharge is designed to saturate the air intake charge, providing the best atomized mixture of nitrous, and fuel into the air stream! Nitrous Outlet Hydra wet nitrous nozzles feature aluminum construction, aerodynamic machining, an anodized finish, laser-etched markings and logos, four nitrous discharge ports, and four fuel discharge ports to flow 250 hp, making them ideal for any application.
Not Yet Reviewed
$81.99
$69.69
On Sale
Nitrous Outlet Deep Break center solenoid mounting brackets are specifically designed for carbureted or carbureted-style EFI intakes with a 4500 flange. The solenoids mount in the front and rear center of the intake, slightly lower than the flange. They are built strong enough to withstand engine vibration to keep your solenoids securely in place and are good for use with tall intake manifolds, or for hanging the solenoids upside-down.
Not Yet Reviewed
$65.99
—
$79.99
$56.09
—
$67.99
On Sale
APR throttle body inlet system is a comprehensive upgrade to the factory charge pipe system from the intercooler outlet to the throttle body. APR replaces all the components and provide a new, larger, free flowing system that flows roughly 34 percent more than stock. This was achieved by increasing the cross-sectional area of the system and by reducing the tight radius bend directly in front of the throttle body. This system does away with two potential boost leak points thanks to their single cast design. They have upgraded the intercooler outlet hose to a multiply wire-reinforced silicone design with T-bolt clamps that resist boost leak over the stock counterpart. APR's new billet throttle body to manifold adapter provides a convenient boost and vacuum reference point which can be used to for a gauge or anything else that suits your build. Lastly the system comes complete with new throttle body and intake manifold gaskets, which are common leak points many never know to address.
Not Yet Reviewed
$168.55
—
$222.95
$74.95
—
$99.95
Save critical front-end pounds! Proform offers you a choice of five race-winning combinations--air cleaner lids ranging from genuine carbon fiber to aircraft aluminum, with or without the famous Bowtie and Chevrolet Emblems. Plus, Proform's aluminum air cleaner assemblies include a 3 in. tall genuine A/C filter and a color-matched, super-deep aluminum base for maximum clearance when using optional, extra-tall air filter elements. These Proform weight-saving, high performance air cleaner kits blend traditional OEM appearance profiles with optimized airflow dynamics to achieve checkered-flag results. Necessary mounting hardware and center nuts are included.
( 4 )
$91.95
Chevrolet Performance engine coolant crossover pipes are designed to vent the coolant to ensure that the coolant reaches the highest point on the cylinder heads and doesn't get blocked by an air pocket. They are manufactured from quality materials and install in the stock location for a direct fit.
( 6 )
$59.99
Does some custom exhaust work require you to relocate your oxygen sensors? Then Kooks Headers oxygen sensor harnesses are just for you. They're available in several different lengths and for various applications. These harnesses are also assembled from high-quality components to meet or exceed OEM specifications. For an easy, hassle-free installation on your next exhaust project, choose Kooks oxygen sensor harnesses.
( 7 )
$107.33
Born from the speed team that built the first Comp car to break the 6-second quarter-mile, Lingenfelter Performance Engineering supercharger hubs give you the power to customize your machine even further. They allow you to change your spool up and boost properties by changing the size of pulley you have running your shaft. Different pulleys give you different boost, allowing you to let loose or reign in your beast of an engine with a simple pulley swap.
( 2 )
$65.50
—
$72.15
Clearance
Air filters are too often overlooked. WIX air filter elements play a vital part in preventing foreign particles like soot, carbon, and abrasives from damaging your engine. Even the smallest dust particles can damage cylinder walls, pistons and piston rings and cause premature engine wear. WIX panel air filters provide air with a linear path and low restriction. They have special pocket pleats in the media, held together with specially formulated adhesive. The filter media is framed by a urethane sealing gasket and is supported (when applicable) by a mesh screen, which are both molded in place with the filter element. WIX radial air filters feature a mesh screen on the inside and outside walls for element strength and media protection from backfires. Each filter is held together with heat-resistant plastisol with specially designed seals on the top and bottom walls and an adhesive seal that joins the media ends. WIX air filter elements for medium and heavy-duty trucks use more expensive compounds like silicone, rather than foam or rubber sealing gaskets, in order to assure a proper seal under harsh conditions. Their media feature embossed pleats and pleat stabilization beads that help the filter trap more dirt and last longer. End caps are designed with structure and fit in mind, many with metal end caps with handles, which allow for ease of installation and helps ensure that the filter becomes one with the housing to protect the engine.
( 69 )
$72.99
$56.50
Canton Racing manufactures and machines adapters that you can be sure will allow for the proper installation of your carburetor to your manifold. They choose phenolic for the majority of their adapters to stop the transfer of heat from the engine to the fuel system, and insert steel coils to strengthen the mounting hole threads. Canton Racing carburetor adapters are also available in aluminum and various designs to offer you the best performance for your application.
( 1 )
$74.00
—
$93.36
On Sale
Nitrous Outlet vehicle-specific solenoid mounting brackets are custom-made to place the solenoid in the right location in your engine compartment—for a clean, easy, and professional nitrous install. They're built strong enough to withstand engine vibration to keep your solenoids securely in place, while giving your system a custom-anodized, show-quality finish. The brackets are available in a variety of styles.
Not Yet Reviewed
$72.99
$62.04
On Sale
COBB Tuning intercooler hard pipes allow the use of the factory or COBB intercooler core, while cleaning up the engine bay and freeing up airflow to the engine. These hard pipes make great replacements for factory plastic tubing, removing restrictions and improving airflow to the engine. The single-piece hard pipes are formed from mandrel-bent aluminum tubing for fitment on both the cold side and hot side of the intercooler. The results are weld-free pipes from the turbo outlet to intercooler inlet, and from the intercooler outlet to the throttle body. Silicone hose couplings and T-bolt hose clamps are available (depending on application) to facilitate installation. Order the kit designed for your specific vehicle application.
( 1 )
$75.00
$63.75
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
