Availability
Injector Dynamics makes some of the best aftermarket fuel injectors available in the industry—and are the top choice for experienced tuners. They offer replacement elements for their ID F750 performance fuel filters. When your filter becomes worn beyond regular servicing, these economical elements will restore the function you desire. DETAILS: * Replacement filter for the Injector Dynamics ID F750 Fuel Filter setup * Features a high level of contaminant while maintaining low restriction to flow * Flow rate of 750 liters per hour * Will hold five grams of contaminant before requiring a replacement * Check out the Delta P Indicator for the current condition of the filter element in your ID F750 * NOTES: To check the condition of the filter element, simply note the Delta P at idle, knowing that it represents worst case conditions. Also note that the total flow in a return-less system is quite different, and maximum flow will occur at or near the horsepower peak. While Delta P could be monitored at peak horsepower on the dyno, or even by video while on track, the indicator should only be considered practically useful on a return style system. * Replacing the Element: Once pressure is relieved, the filter cup can be removed by releasing the safety latch, and spinning the cup free. The filter element is removed by pulling straight down. Replace the old element and O-ring with new pieces, being sure to lubricate each with engine oil, grease, etc.
Not Yet Reviewed
$55.00
Volant MaxFlow 5 filters are high performance air filters made up of five layers--four cotton gauze and one synthetic--pleated between a top and bottom aluminum screen. This design allows for the highest airflow rate possible and a very long filter life. These cleanable and reusable filters come pre-oiled and ready for use.
( 27 )
$57.90
—
$101.90
Pro GUARD 7 air filters from aFe are specifically developed for today's demanding diesel and rigorous off-road applications. They have five layers of cotton gauze and two layers of synthetic fabric, combined with their own specially formulated filter oil, to achieve amazingly high filtration levels without sacrificing airflow. The elements are available in a variety of styles and sizes—for both universal and vehicle-specific applications. Additional features: * Integrated polyurethane bump seal * 100 percent polyurethane top and bottom * 99.7 percent filtration efficiency
( 19 )
$65.00
—
$112.00
Trick Flow® 5.0L R-Series EFI NOS hardware kits include the hardware that you need to run nitrous with your Trick Flow® manifold. Kits include: * Five 5/16-24NF 12 pt. nuts * Two 5/16-18 x 7 1/4 in. long chrome socket head cap screws * Two TFS R-Series upper/lower flange gaskets * Five 5/16 x 3 in. long studs
Not Yet Reviewed
$52.99
Save critical front-end pounds! Proform offers you a choice of five race-winning combinations--air cleaner lids ranging from genuine carbon fiber to aircraft aluminum, with or without the famous Bowtie and Chevrolet Emblems. Plus, Proform's aluminum air cleaner assemblies include a 3 in. tall genuine A/C filter and a color-matched, super-deep aluminum base for maximum clearance when using optional, extra-tall air filter elements. These Proform weight-saving, high performance air cleaner kits blend traditional OEM appearance profiles with optimized airflow dynamics to achieve checkered-flag results. Necessary mounting hardware and center nuts are included.
( 4 )
$91.95
Pacific Performance Engineering knows the huge stresses that drag racing and sled pulling put on your diesel's parts. Their silicone tubing couplers were designed to handle the rigors of long-distance towing, racing, and pulling competitions! They are made to be strong and durable, with five plies of polyester reinforced fibers. A chemical, oil, fuel, UV, and ozone-resistant fluorocarbon lining gives PPE silicone couplers the strength to withstand the exposure to heavy usage and bring reliable, long-lasting performance. Their silicone rubber construction ensures constant boost pressures from -76 degrees F to 437 degrees F. They won't blow out like stock hoses will! In short, Pacific Performance Engineering silicone tubing couplers are a smart choice for your high performance diesel!
( 15 )
$53.09
—
$80.99
aFe Magnum FLOW Pro 5R air filters are available for a wide range of vehicle-specific applications, as well as universal-fit models. With up to a 38 percent increase in flow over stock, Pro 5R air filters feature factory-oiled cotton media for maximum performance. Their progressive bump seal design and polyurethane frame makes them extremely durable and simple to install. The filters are available in different sizes and styles, including panel and conical. * Washable and reusable for multiple cleaning cycles: Pro 5R filter media features five layers of progressive oiled cotton gauze for maximum performance. Deep, open pleats allow for increased surface area, flow, and dust holding dapacity * Pro 5R filter media: Progressive layering allows the filter to flow at high levels even when dirty. This media is perfect for street and/or track use. Pro 5R filters are easily recharged with aFe's Power Cleaner and blue air filter oil. * Rounded deep open pleats: aFe Power performance air filters use a rounded, evenly spaced pleat design which allows for more usable filter surface area, providing increased flow and greater dust holding capacity. * Progressive bump seal: This pliable sealing surface conforms to even the most uneven filter housing, making for a perfect filter fit and sealing surface every time. This design eliminates the use of gaskets or sealants and always goes back to its original form.
( 1 )
$54.00
—
$103.00
Volant's Primo filters address the need for extra protection from dust and debris with a washable/reusable, oil-impregnated cotton gauze filter. These Volant Primo filters feature a new filtration technology aptly called Pro-Guard 7 that's been designed to catch the smallest of particles as air passes through the filters. They're made of five layers of cotton gauze and two layers of a random-porosity, non-woven synthetic polyester fabric that are sandwiched between an epoxy coated aluminum wire mesh.
( 4 )
$101.90
—
$113.90
With five layers of progressively finer mesh cotton gauze media between a 100 percent polyurethane top and base, aFe Takeda Pro 5R air filter "oiled" elements provide excellent airflow for maximum horsepower and torque. Washable and reusable, the Pro 5Rs' open, evenly spaced pleats provide excellent dust holding capacity for a longer service cycle between cleanings. Takeda filter elements have a pliable polyurethane flange with integrated bumps, ensuring tight, no-leak seal over the life of the filter element. Pick the replacement element sized for your intake system.
Not Yet Reviewed
$60.00
—
$88.00
S&S Cycle Series 72 main jets for S&S Super E and G carburetors are available in numerous sizes and can be purchased individually or in packs of five. These quality brass jets will efficiently supply fuel to the engine when the throttle is open. Select the size needed.
Not Yet Reviewed
$50.95
S&S Cycle idle mixture screws adjust the air-fuel mixture at idle speed to achieve the highest possible idle vacuum at the set idle speed. Made of brass, S&S idle mixture screws come in a package of five, so you can have some extra on hand.
Not Yet Reviewed
$60.95
aFe Aries AE1 Pro GUARD 7 air filter elements are designed to replace the stock air filter on your motorcycle or ATV for better performance, higher flow, and a longer service life. Pro GUARD 7 elements have five layers of cotton gauze and two layers of synthetic fabric, combined with their own specially formulated filter oil to achieve amazingly high filtration levels without sacrificing airflow. If you are riding in the most extreme conditions, you can put your trust in these aFe Aries AE1 Pro GUARD 7 air filter elements.
( 2 )
$65.00
—
$112.00
ZZPerformance offers modular supercharger pulleys for a variety of applications, including 2004-05 Buick, Chevy, and Pontiac engines. The aluminum pulleys are available in a range of outside diameters, with a black or clearcoat finish. Each pulley system includes hub, pulley of your choice, five stainless socket cap button screws, and one barbed retainer to replace the breather bolt. After removing the stock pulley, the ZZP steel hub presses on using the same pulley tool used to remove the factory pulley. No jaw-style puller should be used to remove a supercharger pulley. If it is used, it will destroy the pulley and possibly damage the supercharger. Once installed, the hub allows quick-changing of pulleys with an Allen wrench. The ZZP modular pulley system (MPS) allows you to change between pulleys depending on conditions; use one pulley for street use and a smaller for the track or when running high octane fuel. An MPS is a must for those planning to continue to modify their car in the future. ZZPerformance pulleys come with eight ribs on them, but a 6-rib belt will still work completely fine. * Fits: -- Pontiac Grand Prix GTP or 06+ GT -- Buick Regal GS -- Pontiac Bonneville SSEi -- 2004+ Impala SS -- 2004+ Monte Carlo SS * Pulley recommendations: -- 3.5 pulley for 01-03 GTP/GS with ZZP PCM, Tstat, colder plugs, bolt in downpipe, and a cold air intake -- 3.5 in. for 2004+ Grand Prix recommended for cars with 1.9 rockers, Tstat, colder plugs, some exhaust work, and a cold air intake -- 3.4 in. for 1997-2000 GTP/GS with ZZP PCM, Tstat, colder plugs, bolt in downpipe, and a cold air intake -- 3.3 in. pulley requires a small cam or headers or any SS intercooler -- 3.2 in. pulley requires a XP cam or a SS intercooler with 1.9 rockers -- 3.0 in. pulley requires larger injectors and a full-size intercooler -- 2.8 in. pulley requires a cam, intercooler, and headers
Not Yet Reviewed
$99.98
Keep your coolant contained with BD Diesel Cummins Killer frost plug plates. These aluminum replacements don't require the need to punch out the old frost plug—they work with your existing frost plug in place, blown out, or leaking. The attachment is secure with five flanged head bolts, and one large O-ring keeps everything sealed up tightly. Killer frost plug plates can be used with or without a TCC crossover tube. Order the model designed for your vehicle and engine application.
Not Yet Reviewed
$69.95
Carburetor bowl plugs allow you to drain the fuel from the bowl for maintenance purposes. S&S Cycle bowl plugs are made from brass, available in packs of five, and offer leak-free performance.
Not Yet Reviewed
$53.95
Rough idle, hard starting, and the check engine light--these are a few symptoms that can alert the driver that a potential EVAP problem has occurred. Standard Motor vapor canister components featurie industrial-grade materials for robust performance, they are manufactured for prolonged life and superior performance. As a global manufacturer of emission components, Standard Motor maintains complete quality control through the manufacturing process from start to finish.
( 17 )
$73.99
Standard Motor Products replacement exhaust gas recirculation valves help you get maximum fuel efficiency and power from your engine. Properly operating EGR valves are essential to helping your vehicle run flawlessly—the main emissions control components in the exhaust gas recirculation system. Reduce or eliminate the amount of smog-creating pollutants emitted during the combustion process with these reliable replacements from Standard Motor Products.
( 38 )
$84.99
Dorman fuel vapor vent solenoids serve as part of the emission control system and measure the flow and amount of fuel vapor that are recycled into the combustion process via the charcoal canister, or fuel vapor storage device. Available for a range of applications and manufactured from premium materials for a long service life, these fuel vapor canister vent solenoids are engineered for a perfect fit and are a direct replacement for the original equipment. Order the model for your application needs.
( 18 )
$58.99
Dorman fuel vapor canister purge valves serve as part of the emission control system and measure the flow and amount of fuel vapor that are recycled into the combustion process via the charcoal canister, or fuel vapor storage device. Available for a range of applications and manufactured from premium materials for a long service life, these fuel vapor canister purge valves are engineered for a perfect fit and are a direct replacement for the original equipment purge valve. Order the model for your application needs.
( 22 )
$59.99
—
$86.99
Motorcraft replacement exhaust gas recirculation EGR valves are produced and evaluated to exceptional standards to ensure enduring quality, maximum performance, and an exact, vehicle-specific fit. As an automotive aftermarket division under Ford Motors, Motorcraft manufactures genuine and OE-quality replacement parts for Ford, Lincoln, and Mercury vehicles.
( 1 )
$105.99
Hold on! Have your fuel tank straps seen better days? Spectra Premium fuel tank straps are the perfect solution to your problems. Replace the rust and damage with high-quality steel. These fuel tank mounting straps are fabricated using modern manufacturing techniques with exacting tolerances. Additionally, you will find that their fit and function will work superbly on your vehicles. Spectra Premium designs their fuel tank straps so that they will bolt into your vehicle's stock position, saving you time and frustration. It's time to break those rusted and damaged straps loose! Pick up Spectra Premium fuel tank straps and avoid saying "goodbye" to your fuel tank.
( 67 )
$59.99
—
$90.99
US Motor Works in-tank fuel pump kits for domestic and import applications include all of the components required to rebuild your existing fuel pump module or hanger/sender assembly. All units are manufactured using the highest quality raw materials that are compatible with today's fuel blends. Plus, US Motor Works is an ISO 9001:2015 certified company. In addition to the fuel pump, all US Motor Works in-tank fuel pump kits include: * New strainers for each application * Gaskets * New wiring harnesses made with high-quality materials * High-quality fuel injection lines included with hose clamps * Nitrile or Viton® rubber components for long life and fuel resistance
( 5 )
$68.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
