Availability
Holley gasoline carburetor jet assortment kits are the professional way to track-tune your Holley carburetor for top performance. They consist of two each in different jet sizes. The jets are contained in either a plastic case or aluminum plate that are designed to keep them separated and make them easily accessible.
( 106 )
$96.05
Lokar Hi-Tech throttle cables are available in stainless steel braided, black stainless steel braided, or black polyethylene housings. They're designed with a specially extruded liner for the extended life of the cable—not to be confused with ordinary braided brake hose. These cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying; and feature a "U-Cut-to-Fit" outer housing and stainless inner wire. The clevises are designed without cotter pins or set screws and adapt to factory and aftermarket pedals for an easy installation. Each cable comes with installation instructions. Order the universal-fit or application-specific model recommended for your vehicle and engine family.
( 660 )
$83.95
—
$114.95
Lokar Midnight Series throttle cables have a PTFE inner liner and a black braided stainless steel jacket, along with aluminum clevis ends for smooth, no-bind cable operation. They can be easily adapted to fit most gas pedals and throttle assemblies. The cables are available in different lengths and cable end types; order the universal-fit or application-specific model recommended for your vehicle and engine family.
( 107 )
$83.95
—
$95.95
Holley Sniper EFI fuel injectors provide excellent linearity with no discernible "bounce" at low pulse widths, as commonly found in other injectors. They feature a precision-lapped disc valve, high-quality brass windings, and high-temperature O-rings. Order a set of eight Holley Sniper EFI performance fuel injectors for use with your Holley EFI intake manifold. Features: * PICO/EV6-style performance injectors * High impedance (12.2 ohms) for use with saturated drivers * Rated injector flow: 36 lbs./hr. at 43 psi * Supports up to 575 hp (maximum) * Tri-cone spray pattern * Not intended as service injectors for Sniper EFI TBI product line
( 1 )
$86.95
These Mr. Gasket universal throttle cable kits contain all of the necessary hardware for a complete installation onto your carburetor. They feature a 36 in. long cable, wrapped with a 24 in. stainless steel braided sleeve, that can be cut to length to fit your specific application.
( 97 )
$74.25
Delphi fuel pump module assemblies are nickel plated with all-steel internal components. They feature internal guide rod springs and external rubber feet for enhanced stability and reduced noise from vibration. These fuel pumps have little flow or pressure variation in hot fuel situations. Delphi fuel pump modules are designed to be OE replacements.
( 253 )
$103.99
FAST fuel rails deliver the fuel! Their rails are machined from 6005A-T5 aluminum and feature a large, 11/16 in. inside diameter for consistent pressure at each fuel injector. Offered in several lengths, FAST fuel rails are black anodized to help to promote heat dissipation and prevent oxidation.
( 7 )
$64.95
Trick Flow® TFX™ fuel injectors have so many features, it's no wonder that they are considered one of the best aftermarket injectors available! They atomize fuel better, resist clogging, are quieter, and require less energy to operate than other injectors. Low magnetic stainless steel bodies help prevent moisture contamination, and OEM-style clip grooves eliminate possible fuel leaks. Other features include electronically drilled and machined disc-type fuel control valves, improved nozzles and coil windings, and Viton® O-ring seals to prevent air leaks under extreme operating conditions. High-quality, 1/2 micron filter screens keep foreign debris and contaminants from entering the injectors to ensure proper performance and a long life cycle. TFX™ fuel injectors are 100 percent duty cycle tested to ensure reliability and performance. All flow values are at 3 bar (43.5 psi).
( 36 )
$79.99
S&S Cycle custom throttle cables are designed for use on any 2-cable carburetor installations on bikes with 1 in. O.D. handlebars. For proven performance, order the S&S Cycle custom throttle cables designed for your Harley-Davidson® model.
Not Yet Reviewed
$73.76
Lokar Vintage Series throttle cables provide a period-correct appearance for your engine compartment—with all the advancements of modern cables. These braided stainless steel wires feature a specially extruded liner for long life, along with a retro-look braided cloth cover and protective clear coating. The jackets are offered in a variety of throwback color combos. Each throttle cable is equipped with black aluminum ferrules to eliminate fraying and aluminum fittings for an easy installation. Vintage Series cables are available in several lengths for fitment on many applications. For high-quality throttle cables with a unique "dated" look, choose Lokar!
( 2 )
$95.95
On Sale
Aeromotive belt drive fuel pump pulleys are designed to keep your belt inline. They're made from aluminum with a natural finish, and are available in multiple sizes. The Gilmer-style pulleys will bolt to the Aeromotive belt drive fuel pump with no modifications.
( 2 )
$95.45
$85.90
Make small airflow adjustments with these Quick Fuel air bleed assortment kits. They include four of each sized air bleed to optimize the air coming into the carburetor. Now, you can tune your carburetor for different tracks, elevations, or air conditions. Eliminate low and high-speed idle problems with one of the Quick Fuel air bleed assortment kits.
( 13 )
$94.95
—
$99.95
Holley carburetor renew kits are original equipment rebuild kits and are available for all Holley marine carburetors as well as Carter and Rochester. Each kit contains all parts and gaskets that are necessary to restore like-new performance to your marine carburetor. Detailed instructions are also included to guide you through the rebuilding process. Start off the season with one of these quality Holley Renew marine repair kits--it's your guarantee for trouble-free cruising!
( 118 )
$52.09
Moeller Marine threaded flexible fuel tank pick-ups feature both 3/8 in. NPT and 1/4 in. NPT for barb, as well as an internal flexible spring. Moeller offers two lengths, 22 in. and 36 in. For all your watercraft fuel line and tank connection needs, depend on quality Moeller replacement parts.
Not Yet Reviewed
$65.99
—
$96.99
FAST Precision-Flow injectors are your best choice for fueling your hot rod, race car, or anything in between. These injectors are precision flowed and sorted to ensure that you get consistent fuel delivery at all pulse widths and duty cycles. FAST Precision-Flow injectors are dynamically, multi point tested, and sorted in sealed sets of 8 with a tolerance of +/- 2 percent at all points. This flowing and sorting process gives you consistent cylinder to cylinder fuel delivery for even Air/Fuel ratios across all cylinders and accurate fueling. Your engine gets the amount of fuel it needs to each cylinder for smooth, reliable performance. Full injector characterization data is available for each part number. Features: * Dynamically flowed at multiple pulse widths, then sorted and sealed in sets with +/- 2 percent maximum variance * Include large LS style lower O-ring but can be used in applications with a 0.550 in. injector bore by swapping lower O-ring * Available in flow rates from 30 lbs./hr. to 245 lbs./hr. (rated at 58 psi) * Available as singles or sets of 8 * High impedance * Compatible with ethanol and oxygenated fuels * Part number and flow rate etched into each injector for easy identification * Complete plug-and-play characterization data available for most OEM and aftermarket engine control systems
( 44 )
$56.95
Philadelphia Racing Products throttle cables are available for universal and direct-fit applications. Offering several choices, these PRP replacements will easily take the place of your worn or broken cables to provide the correct fit and function. PRP throttle cables feature braided stainless steel in black or gray.
Not Yet Reviewed
$59.99
The importance of properly jetting a nitrous system cannot be overemphasized! To adjust the power level properly on street-type kits, you need to have the right jets on hand. Flare jets are the most common type and are typically used in most nitrous kits. They can be used in either the fuel or nitrous lines. NOS flare jets are available in many different sizes to suit virtually any need.
( 17 )
$56.19
Gennie Shifter throttle cables are available in two styles. If it's that "All Go, No Show" look you're after, their black cable kits will fit your needs. But, if you're putting together a modern-themed vehicle with a highly detailed engine compartment, one of Gennie's show-stopping braided stainless steel cable kits is your best choice. Both versions come with precision-machined ends and fittings. Order the length and jacket options preferred for your application.
( 1 )
$69.95
—
$80.95
Clearance
Standard Motor fuel pressure regulators ensure that your vehicle's fuel supply is precisely metered for optimum mileage and performance. Defective fuel pressure regulators most often develop excessive pressures that create an overly rich air/fuel mixture, robbing mileage and performance. Similarly, if the pressure regulator diaphragm leaks through its vacuum hose into the engine intake manifold, the fuel mixture will also become extremely rich. Don't take chances with your fuel supply—rely on Standard Motor Products for your vehicle's fuel system needs. Order the replacement regulator designed for your application.
( 47 )
$103.99
These gasoline jet kits from Quick Fuel are precision-manufactured to an exacting flow standard. Tolerances to the middle 1.5 percent of the limit band meet or exceed OEM specifications.
( 28 )
$96.75
Clearance
Standard Motor Products fuel injectors help you attain maximum fuel efficiency and power from your engine. Properly operating injectors are essential components for enabling your vehicle to run flawlessly. These OEM stock replacements are available for hundreds of specific applications. Don't drive with faulty fuel delivery. Update worn or malfunctioning fuel injectors with reliable models from Standard Motor Products.
( 247 )
$71.99
Keep your exhaust emissions--and your budget--down with Standard Motor EGR tubes. If your exhaust gas recirculation tube is cracked or leaking, your EGR valve will not function properly--and that's a problem. So, keep your exhaust gases recirculating properly and efficiently with quality-built Standard Motor EGR tubes.
( 2 )
$96.99
ZZPerformance offers modular supercharger pulleys for a variety of applications, including 2004-05 Buick, Chevy, and Pontiac engines. The aluminum pulleys are available in a range of outside diameters, with a black or clearcoat finish. Each pulley system includes hub, pulley of your choice, five stainless socket cap button screws, and one barbed retainer to replace the breather bolt. After removing the stock pulley, the ZZP steel hub presses on using the same pulley tool used to remove the factory pulley. No jaw-style puller should be used to remove a supercharger pulley. If it is used, it will destroy the pulley and possibly damage the supercharger. Once installed, the hub allows quick-changing of pulleys with an Allen wrench. The ZZP modular pulley system (MPS) allows you to change between pulleys depending on conditions; use one pulley for street use and a smaller for the track or when running high octane fuel. An MPS is a must for those planning to continue to modify their car in the future. ZZPerformance pulleys come with eight ribs on them, but a 6-rib belt will still work completely fine. * Fits: -- Pontiac Grand Prix GTP or 06+ GT -- Buick Regal GS -- Pontiac Bonneville SSEi -- 2004+ Impala SS -- 2004+ Monte Carlo SS * Pulley recommendations: -- 3.5 pulley for 01-03 GTP/GS with ZZP PCM, Tstat, colder plugs, bolt in downpipe, and a cold air intake -- 3.5 in. for 2004+ Grand Prix recommended for cars with 1.9 rockers, Tstat, colder plugs, some exhaust work, and a cold air intake -- 3.4 in. for 1997-2000 GTP/GS with ZZP PCM, Tstat, colder plugs, bolt in downpipe, and a cold air intake -- 3.3 in. pulley requires a small cam or headers or any SS intercooler -- 3.2 in. pulley requires a XP cam or a SS intercooler with 1.9 rockers -- 3.0 in. pulley requires larger injectors and a full-size intercooler -- 2.8 in. pulley requires a cam, intercooler, and headers
Not Yet Reviewed
$99.98
Our Summit Racing™ carburetor jet kits are just what you need to tune your Holley carburetor. The kits consist of two each of 36 different jet sizes, ranging from #64 to #99. The jets are organized by size in a plastic carry case so they're accessible when you need them.
( 110 )
$78.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
