Availability
Showing In Stock Items. Show All 14 Items.
Keep your fuel cell properly vented with one of these ATL fuel cell vent check valves. They are built using quality materials and feature an aluminum check valve that rides freely up and down the tube, allowing excess gases to escape. They are available in your choice of straight or 92 degree valves, so you can choose the one that's best for your fuel cell setup.
Not Yet Reviewed
$83.99
On Sale
FUELAB high-flow, one-way check valves are designed to deliver maximum flow with minimal restriction and pressure drop. Featuring -6 AN, -8 AN, and -10 AN male inlets/outlets, 350 gph flow capacity, cross fuel compatibility, and billet aluminum construction, these advanced engineered FUELAB valves allow for easy installation and prevent flow back after pump shut down. The check valves are rebuildable, have fluorosilicone seats and seals, and a maximum pressure rating of 200 psig.
( 5 )
$83.00
—
$91.00
$74.70
—
$81.90
Redhorse Performance offers 4152 Series one-way check valves to prevent fuel and oil flow back. Each aluminum check valve is fully fuel and oil compatible and armed with a PTFE stopper. They are available to fit -04 AN through -12 AN fittings with male threads, in your choice of red, blue, clear, and black anodized finishes. Select the model for your application needs.
Not Yet Reviewed
$62.06
—
$67.46
Radium Engineering offers check valves that are expertly crafted from premium materials and built to match your exact requirements. These check valve components are compatible for all fluids, such as gasoline, ethanol, methanol, diesel, water, coolant, oil, etc., and feature a lightweight anodized aluminum body with Viton® seals and stainless steel hardware. The internal plunger's aerodynamic shape warrants a smooth laminar stream. Female -AN ports can accept 37 degree flare male fittings and/or ORB (O-ring boss) male fittings. The flow direction is also laser-etched on the side of the part.
Not Yet Reviewed
$56.95
Denso's proprietary turbine pump technology delivers the highest sustained fuel pressures in the industry, and is why Denso electric fuel pumps are chosen as standard equipment by the world's most demanding OEMs, especially for their premium vehicles. Denso's open-vane impellers are more efficient than competitors' closed-vane impellers. Their ultra-efficient design requires low-amperage to ensure optimum flow rates are maintained over time. Denso carefully balances the armatures at 3,000 rpm, then they are spun again at 8,000 rpm to minimize noise and vibration. Many competitors do not balance their armatures at all. Additional features of Denso electric fuel pumps include: * Turbine technology delivers fuel with minimal pressure pulsation for quieter operation * Check valve maintains consistent system pressure for superior hot fuel handling * Relief valve protects the fuel delivery system * Choke coils minimize radio interference * Brushes designed for durability, efficiency, and low-resistance operation
( 6 )
$92.50
—
$105.99
Rough idle, hard starting, and the check engine light--these are a few symptoms that can alert the driver that a potential EVAP problem has occurred. Standard Motor vapor canister components featurie industrial-grade materials for robust performance, they are manufactured for prolonged life and superior performance. As a global manufacturer of emission components, Standard Motor maintains complete quality control through the manufacturing process from start to finish.
( 16 )
$51.99
—
$111.99
Idle air control valves go bad because of excessive carbon buildup in the intake manifold. Crown Automotive replacement idle air control valves are built to control and maintain a consistent engine idle speed when the car is cold or extra load is put on the engine, such as the A/C or radio. When the valve malfunctions, the idling speed is no longer regulated, and your engine may stall. Check the applications for the proper fitment of these Crown IAC valves and automatic idle speed (AIS) motors.
( 3 )
$59.99
—
$93.99
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 49 )
$109.99
AED has combined every possible add-on feature and incorporated it into each of these Ultimate Performance carburetor kits to give you longer-lasting and improved performance from your Holley carburetor. Most of the features that you would buy separately are already included. Features include: * High-flow needle and seats * Nylon reusable needle and seat gaskets * Nylon reusable bowl screw gaskets * New brass idle mixture screws * New needle and seat nuts and screws * New accelerator pump squirter check valves * Special no-leak fuel inlet gaskets * Non-stick bowl and metering gaskets
( 85 )
$54.99
—
$98.99
Stromberg carburetor rebuild kits are the real deal. Designed and manufactured to the highest quality, these premium service kits offer great value and authentic service parts for your Stromberg carburetor rebuild. These carburetor kits are available for your Stromberg 97, 48, 40, and 81 to keep them operating at peak performance. Kits include: * Full gasket kit * No-stick S-jet inlet valve * Accelerator pump check valve * 2 idle mixture screws and springs * Full accelerator pump kit * Installation sheet * Float gauge
( 16 )
$52.95
—
$58.25
Rebuilding your nostalgic 94 carburetor? Edelbrock 94 rebuild kits contain everything you need to do the job right. Kits include fuel inlet seat and needle, accelerator pump assembly and spring, accelerator check ball, check ball retainer, power valve assembly, float gauge and all the necessary gaskets. These rebuild kits will overhaul any Edelbrock 94 or Holley 94 2-barrel 3-bolt flange carburetor and have your hotrod running in no time. Do your rebuild right with Edelbrock 94 carburetor rebuild kits.
Not Yet Reviewed
$60.95
Turn up the boost with Vibrant Performance manual boost controllers! These lightweight, compact controllers are one of the easiest and most affordable ways to squeeze more horsepower and torque from your turbocharged vehicle. Vibrant Performance manual boost controllers feature a unique integrated dial that lets you precisely set your boost, while eliminating the risk of over-boosting that can occur using other manual boost controllers. Vibrant Performance even includes an adjustment key that you can carry on your key chain to easily adjust your boost whenever you wish! They're CNC-machined from T6061 billet aluminum and premium-grade brass and include 18 in. of silicone vacuum hose and installation instructions.
( 2 )
$107.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
