Availability
Showing In Stock Items. Show All 141 Items.
ATS Diesel Performance electronic fuel regulators are designed to allow you to utilize your turbochargers full potential without the truck's computer reducing fuel when it gets that extra boost you've been looking for. They will allow higher boost pressures while maintaining the factory fuel pressures. This is essential when doing any turbo modifications. When the turbo produces boost pressure over stock, the engine will then reduce fuel.
( 4 )
$69.76
Summit Racing™ mechanical wastegates are constructed of cast stainless steel and 6061 aluminum with a black anodized finish. These valves control the flow of exhaust gases to the turbine wheel in a turbocharged engine system. Their primary function is to regulate the maximum boost pressure in turbocharger systems, to protect the engine and the turbocharger. Order the relief diameter preferred for your application.
( 28 )
$100.99
—
$109.99
Summit Racing™ 50MM blow-off valves are a pressure release system that takes the load off your turbocharger when the throttle is suddenly closed, preventing damage to both the turbo and your engine. These valves are adjustable from 0 to 50 psi, making them ideal for most boosted applications. Machined from aluminum and black anodized for durability, these blow-off valves offer a quality look for any turbo setup. They include vacuum fittings, aluminum weld flange, V-band assembly, and springs.
( 13 )
$69.99
VS Racing X50 blow-off valves are designed for use on large-capacity turbocharger systems and high-horsepower engines. Featuring a 50mm design, small size, and lightweight construction, VS Racing X50 port blow-off valves provide greater performance through faster turbo spool-up from idle, along with reduced turbo lag between gears. VS Racing X50 port BOVs are ideal for circuit and drag vehicles and trucks—so order today!
( 12 )
$78.00
Set it and forget it with Turbosmart boost tee boost controllers! These smaller and lighter manual boost controllers offer precision power, durability, and the biggest bang for your buck. Turbosmart boost tee controllers are easy to install and are cost-effective in controlling the amount of pressure going to your wastegate via their gated boost control valve. Built from high-grade brass and aluminum, these controllers allow for easy boost adjustment from under the hood with their accurate, proven detent system. Under the hood boost tees are ideal for many applications from mild to wild! Improve your turbo response and performance with Turbosmart boost tee boost controllers.
( 1 )
$98.95
Turbo-Guard presents its latest design, SF+ inlet screens with significantly upgraded mesh for those seeking ultimate protection. Their strength surpasses the top-selling Turbo-Guard SF series by 400 percent. Although the mesh is tighter, it's resilient enough to endure any boost. Moreover, these guards have an exceptional lifespan, outlasting the turbo itself under normal circumstances, making replacement unnecessary until you determine your turbo needs an upgrade. Additional details: * Crafted with a stainless steel screen that is rated for over 200 psi * Guard is compatible with ALL turbos and superchargers * All Turbo-Guards come with a premium stainless steel clamp. The script is laser-engraved and will vary in color depending on the color silicone and screen * Installation and removal are quick and easy * Screen is molded into premium silicone all the way under the clamp, ensuring greater strength and preventing the screen from being sucked in * One-piece design is unequivocally the best and safest choice if you use a screen filter or have limited space for a cone filter * Protects against large debris from entering your turbo and causing catastrophic failure, costing you thousands to fix (birds, rocks, body parts, etc.) * Not as bulky as big cone filters, so it can fit into small, tight spaces where turbos often hide * Great look for styling your ride * Let the turbo noises out! * Tightest mesh, measuring just 0.06 in. openings * Available in multiple inlet diameter and coupler color options
Not Yet Reviewed
$69.99
—
$99.99
Summit Racing™ Turbo adapters help you get that Turbo mounted quickly and right the first time. Made from cast stainless steel with thick warp free flanges, they allow you to convert from a v-band to a flange or a flange to a v-band. Available in straight or 90 degree they feature smooth internal shapes for maximum flow and sealing.
( 4 )
$50.99
—
$70.99
Summit Racing™ boost control solenoids are simple universal 12 V activated solenoid valves that you can use to control your boost pressure. They can be used with any engine control system or boost controller and allow you to vent or route pressure to or from your wastegates. They include the solenoid, 1/4 in. hose barb fittings, and a vent.
( 1 )
$61.99
Innovate MAC high-resolution solenoids are made of high-quality materials for performance and longevity. These 3-port replacements help to ensure accurate boost control in a variety of turbo applications. The solenoids deliver great value for your motorsports competitors.
( 3 )
$65.99
The Turbo-Guard Ultra is the only true one-piece designed turbo screen on the market. The stainless steel inlet screens are molded under the clamp to provide superior protection, while the 79 percent open area will let your turbo breathe with added peace of mind. They fit on all turbos and superchargers. The silicone guards are available in a variety of color options. Ideal for: * Maximum airflow * Rated over 500 psi * High horsepower applications * High boosted diesel applications * Street/Strip Additional notes: * Clamps are made to last with laser engraving font * These screens are the sweet spot in the middle for protection and airflow * Same brute strength as the Turbo-Guard Maxx but with smaller holes * The stainless steel provides superior protection along with NO power loss * These will also work with some velocity stacks * Tested at over 100 psi * Available in inlet diameters from 3 in. to 5.5 in.
Not Yet Reviewed
$54.99
—
$84.99
Vibrant Performance bellmouth velocity stacks offer less turbulence for better results. Ideal for all motor and forced-induction race applications, these bellmouth-style stacks allow less turbulent air to enter your race engine, resulting in greater airflow performance for ultimately significant torque and horsepower gains with reduced turbo lag! Velocity stacks are spun from 1/8 in. thick T6061 aluminum alloy. Add efficiency for top performance with Vibrant Performance bellmouth velocity stacks.
( 4 )
$82.99
Eliminate the installation headaches associated with non-flexible OE drain lines with Fleece Performance silicone turbo drain tube kits. Each kit features a larger inner diameter, smooth silicone hose for longevity and durability, and black anodized billet aluminum flange with integral O-ring for leak-free performance. Fleece's patent pending drain hose simplifies turbocharger installation and will ensure proper oil drainage from your turbocharger. Kits include new fasteners and are designed for use with all Cummins equipped Dodge Ram factory-style turbochargers, VGT or HX35 and HY35-style turbochargers, as well as aftermarket drop-in replacements, like Fleece's Cheetah Series. Choose the turbo drain line kit designed for your Cummins.
( 3 )
$94.99
When installing a Fleece Performance S400 turbo with intercooler, you're going to need the proper adapters. These 90-degree discharge adapters include a clamp and O-ring to ensure you get the proper seal. Don't lose out on performance!
( 1 )
$60.00
Milodon aluminum blower studs and aluminum nuts are designed to permit blower and manifold separation during unexpected blower explosions without causing damage to the manifold and blower housing, which would otherwise occur. These studs are used by professional racers in Top Fuel, Funny Car, and Alcohol classes and are recommended for all supercharged applications. Studs, nuts, and washers are included.
( 4 )
$94.95
ICT Billet turbo oil feed lines feature a PTFE core with a braided stainless steel outer jacket. They include pre-installed -4 AN hose ends: one 90 degree female and one straight female. They are available in different lengths to help you with your project, from start to finish.
( 9 )
$54.99
—
$58.99
Put the finishing touches on your truck with high-quality Fleece Performance turbo drain tube kits. The tubes are braided stainless steel for durability on the exterior, and reinforced with rubber tubing for flow and maximum flexibility. The kits contain everything you need to connect an S300/S400 turbo drain back to the factory drain location on the Cummins block when using a fixed vane geometry turbo. Kit contains: * Drain tube (20 in. end-to-end) * Cummins turbo drain tube adapter * Turbo drain flange adapter * Turbo drain gasket * 7/8 in.-14 to -10 AN fitting * Two 3/8in.-16 flange head bolts * Two 10mm x 1.5 flange head bolts
( 3 )
$99.95
By precisely controlling boost, the solenoid helps optimize engine performance, preventing over-boosting (which can damage the engine), and improve fuel efficiency. Regulate the amount of boost generated by your turbocharger with Standard Motor boost solenoids. They are quality built and extensively tested, ensuring a direct fit, superior performance, and an easier installation. Once installed, Standard Motor turbocharger boost solenoids will resolve boost pressure and drivability issues caused by clogged or burned out OE units. Select the solenoid designed for your vehicle.
Not Yet Reviewed
$76.99
—
$98.99
Changing the blower oil on your ProCharger supercharger just became easier and less messy with these easy-to-install self-contained drain line field upgrade kits. They include complete instructions, 24 in. drain line, oil drain fitting, O-rings, and gaskets. The kits are available with either a straight or 90 degree angle fitting. (Fits all ProChargers except A1 and C1A.)
Not Yet Reviewed
$79.00
ARP anodized aluminum studs allow your blower and manifold to separate during a blower explosion to minimize engine damage. These kits also include 12-point, aerospace-quality nuts and parallel, ground-hardened washers.
( 7 )
$82.99
—
$89.99
Designed for use with Roushcharger supercharger kits, Roush Mustang heat exchanger coolant tanks (degas bottles) are for low-temperature radiator/heat exchanger applications. These tanks hold just over half a gallon of fluid.
( 2 )
$62.00
Fleece Performance turbo oil feed lines ensure that your system gets an adequate oil supply. They offer replacements for your OE setup, as well as remote kits that prevent premature bearing failures. All include extra-flexible, smooth bore PTFE hose and high-quality fittings. The remote kits will also include a stock oil feed plug and an oil galley rifle fitting. Whether you're replacing or upgrading, Fleece Performance turbo oil feed lines are available for your application.
( 1 )
$69.99
—
$99.99
DIYAutoTune electronic boost control solenoid kits can be used with the MS3-Pro/MSPNP as well as any DIY MegaSquirt EMS (with the appropriate mods), or with other electronic boost controllers to control boost by adjusting the pressure to a turbo wastegate. The MS3Pro, MS3X, MSPNP, and DIYPNP can drive these solenoids directly. The boost control solenoids operate on a frequency of 19.5 to 40 Hz and is practically a wire-in replacement for the now-discontinued GM EBC solenoid. They usually need a slightly lower duty cycle than the GM valve; if you're replacing a GM valve, DIYAutoTune recommends cutting back your duty cycles by 30 percent and then carefully testing and adjusting as needed. The kits include 1/8 in. barb fittings and mounting hardware.
( 1 )
$62.99
Magnuson intake manifold gaskets are high-quality gaskets designed to meet or exceed the quality of your factory gaskets. They are available for a wide variety of applications to meet your needs.
( 4 )
$62.00
Turbo-Guard Blower-Guard inlet screens offer the only true one-piece design on the market. Their stainless steel screen is molded under the clamp to provide superior protection with no power loss, while the 79 percent open area will let your turbo breathe with added peace of mind. Additional details: * These inlet screens fit on all turbos and superchargers * Developed for your high HP application * Perfect for diesels or any high boost applications * These screens are the sweet spot in the middle for protection and airflow * Same brute strength as the Turbo-Guard Maxx but with smaller holes * Will also work with some velocity stacks! * Available in multiple inlet diameters and coupler colors Ideal for: * Maximum airflow * Rated over 500 psi * High horsepower * High boosted diesel applications * Street/Strip
( 1 )
$59.99
—
$69.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
