Availability
Showing In Stock Items. Show All 25 Items.
ARP stainless steel intake manifold bolts are 15 percent stronger than Grade 8 steel bolts and have a wide-area flange for better load distribution. They also have precision-rolled threads, which prevent galling and promote more consistent torque loading. These bolts are both corrosion and heat-resistant and come highly polished. Bolts are available in both hex head and 12-point types, and washers are included.
( 260 )
$50.99
—
$76.99
On Sale
These special Grade 8 intake manifold bolts from Mr. Gasket feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They're ideal for use where space is minimal, typical on larger runnered race manifolds. These bolts and washers are bright zinc plated for protection and good looks.
( 1 )
$55.65
Edelbrock intake manifold bolts are specifically designed to work with their manifolds, including the Performer, Performer RPM, and Torker series. They feature reduced hex heads for easy wrench access, an attractive cadmium finish for corrosion resistance, and hardened washers. All bolts and washers needed for manifold installation are included in these kits.
( 227 )
$58.95
—
$61.95
These show quality intake manifold bolts from Mr. Gasket are individually polished to a high luster, then chrome plated for lasting beauty. They're ideal for street rods and street machines, or any vehicle requiring show quality chrome.
( 4 )
$87.05
ARP rugged, black-oxide coated chromoly intake manifold bolts are rated at 170,000 psi. They're precision-machined for optimum thread engagement and have a wide-area flange for better load distribution. They also feature precision-rolled threads, which prevent galling, while promoting more consistent torque loading. These bolts are available with either hex or 12-point heads, and washers are included.
( 397 )
$50.99
—
$94.99
These Trick Flow® stainless steel intake manifold bolt kits are 15 percent stronger than Grade 8 steel bolts and have a wide-area flange for better load distribution. They also have precision-rolled threads, which prevent galling and promote more consistent torque loading. Trick Flow® stainless steel intake manifold bolt kits are both corrosion and heat-resistant and come highly polished.
( 1 )
$62.99
—
$72.99
Eliminate fastener problems with Stage 8's complete line of locking bolt kits. They provide a simple, yet effective method to insure that your fasteners do not loosen unexpectedly. Each fastener uses a mechanical clip to lock it in place, and preventing it from backing out. The clip acts like leaving a small wrench on the bolt head, as the clip prevents the fastener from turning. Easier to use than safety wire, and cleaner than chemical thread lockers, it remains locked in place until manually disassembled. They're great for racers, and common problem areas such as header and oil pan bolts, and remain locked in place until manually disassembled.
( 2 )
$59.23
These Trick Flow® steel intake manifold bolt kits have precision-rolled threads, which prevent galling and promote more consistent torque loading. Trick Flow® steel intake manifold bolt kits are heat-resistant and come in a chrome finish.
( 3 )
$60.99
Chevrolet Performance offers these intake manifold bolts for securing your manifold with confidence. They're rated at 170,000 psi and will give consistent torque load.
Not Yet Reviewed
$74.32
Stage 8 locking intake manifold bolts are designed to stay put once they're tightened down. They are reusable, can be visually inspected, and install easily with no special tools.
( 3 )
$59.23
—
$66.27
Summit Bucks
NotcHead intake manifold bolt kits offer their unique, seven-notched design forged from high-grade stainless steel and CNC finished for strength and a beautiful appearance. Each bolt comes with a neoprene bonded stainless steel washer. Used along with NotcHead custom engineered sockets, you can eliminate the occurrence of "rounded off" bolt heads—a common and frustrating problem with traditional button heads. Dress up your intake manifold with NotcHead bolt kits.
Not Yet Reviewed
$79.37
MSD LT1 Airforce intake fastener kits serve as high-quality bolt replacements, specifically designed for the MSD Airforce intake manifold. The Allen head style bolts are made from stainless steel with a natural finish and come with washers to facilitate fuel injection throttle body attachment.
( 1 )
$92.19
FAST intake manifold hardware kits come complete for specific FAST intake manifolds. The kits are made from stainless steel for longevity and have an Allen head design for optimal bolt head clearance for installation.
( 2 )
$61.95
—
$94.95
Holley intake manifold studs are made of high-quality steel construction for long-lasting durability and performance. They are designed to be used with Holly Hi-Ram style intake systems to give them peak performance. If you have a new Hi-Ram system you're throwing in your ride, make sure you don't forget to grab a set of these Holley intake manifold studs.
( 1 )
$88.39
Trick Flow® 5.0L R-Series EFI NOS hardware kits include the hardware that you need to run nitrous with your Trick Flow® manifold. Kits include: * Five 5/16-24NF 12 pt. nuts * Two 5/16-18 x 7 1/4 in. long chrome socket head cap screws * Two TFS R-Series upper/lower flange gaskets * Five 5/16 x 3 in. long studs
Not Yet Reviewed
$52.99
On Sale
Holley offers intake manifold hardware kits for a variety of Chevrolet engine applications from 1997 and up. The installation hardware is available in a silver or black finish.
Not Yet Reviewed
$51.39
—
$82.25
Trick Flow® EFI heat spacer kits help you fit your spacer between the upper and lower intakes to create a heat flow barrier. That keeps the air in the upper intake cooler and denser. Plus, these CNC-machined phenolic spacers provide clearance for taller valve covers. They're available in 3/8 in. and 1 in. thick versions and include gaskets and longer mounting bolts.
( 89 )
$64.99
—
$99.99
When upgrading your LS-powered vehicle, don't forget to replace the factory steam tubes. Our Summit Racing™ Pro LS steam line plumbing kits eradicate trapped air and steam pockets from your engine to prevent hot spotting and overheating as well as provide more flexibility when using aftermarket intakes. Kits vent all 4-corners (except SUM-220952 and SUM-220952B kits) and contain black anodized billet aluminum fittings, steam port adapter, O-rings, stainless steel bolts, -3AN or -4AN hose and hose ends, (stainless steel hard lines and 5-port distribution block on SUM-220959 kit only) to make installation easy and more attractive than OEM lines, offering a cleaner look and better waterflow.
( 18 )
$74.99
ICT Billet intake plenum spacers give your project a lift. These risers are made from aerospace-grade billet aluminum and will include bolts for the install.
( 1 )
$72.99
—
$99.99
Chevrolet Performance engine coolant crossover pipes are designed to vent the coolant to ensure that the coolant reaches the highest point on the cylinder heads and doesn't get blocked by an air pocket. They are manufactured from quality materials and install in the stock location for a direct fit.
( 6 )
$59.99
Seal up your engine while looking good with one of these ICT Billet LS lifter valley covers. They are designed to fit (Non-DoD) engines and are milled from a solid block of aerospace-quality billet aluminum. The covers offer outstanding block rigidity, while the precision-machined underside provides an excellent seal using the existing factory O-ring. Their wide chamfered edges ensure adequate intake manifold runner clearance and they include the necessary flush mount, Allen head stainless steel mounting hardware.
( 71 )
$89.99
Standard Motor Products replacement exhaust gas recirculation valves help you get maximum fuel efficiency and power from your engine. Properly operating EGR valves are essential to helping your vehicle run flawlessly—the main emissions control components in the exhaust gas recirculation system. Reduce or eliminate the amount of smog-creating pollutants emitted during the combustion process with these reliable replacements from Standard Motor Products.
( 38 )
$65.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
