Availability
Showing In Stock Items. Show All 24 Items.
BBK oxygen sensor extension harness sets are direct plug-in designs to prevent the cutting and lengthening of your oxygen sensor wires. They are ideal for full-length headers and other specific applications.
( 45 )
$69.99
On Sale
Attach your throttle cable to your LS engine with one of these MSD Atomic AirForce intake manifold throttle cable brackets. They're manufactured from quality materials and are designed to bolt directly to the MSD Atomic AirForce intake manifold. The brackets include stainless steel mounting hardware to complete the installation.
( 3 )
$79.09
Lokar Hi-Tech throttle cables are available in stainless steel braided, black stainless steel braided, or black polyethylene housings. They're designed with a specially extruded liner for the extended life of the cable—not to be confused with ordinary braided brake hose. These cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying; and feature a "U-Cut-to-Fit" outer housing and stainless inner wire. The clevises are designed without cotter pins or set screws and adapt to factory and aftermarket pedals for an easy installation. Each cable comes with installation instructions. Order the universal-fit or application-specific model recommended for your vehicle and engine family.
( 661 )
$71.95
—
$114.95
BluePrint Engines offers throttle bodies for a wide range of applications, including many Chevrolet, Cadillac, GMC, Hummer, Saab, Dodge, Jeep, and Ram cars and trucks from 2009 and up. The LS compatible throttle bodies feature OEM quality, an 87mm throttle blade, and provide an excellent performance alternative to the pricey factory version. They're a great Gen IV swap candidate for engines using the 2009+ pinout and wiring. Tested by BluePrint on OEM vehicles, and used on LS3 and supercharged LS applications, let your LS breathe with one of these OE grade throttle bodies. Additional details: * 87mm throttle * Multi-port fuel injection * Drive-by-wire * 6-pin electrical connector - Gold Blade * Replaces: 12601387, 12629992, 2173151 * Used in factory GM Supercharged LS configurations * Can also be used to replace snout style TB 12605109, 19420707 as a space saver with tuning * Can be used as an OEM replacement, or as a swap throttle; however a throttle position reset of the OEM ECU is required for proper idle and drivability
Not Yet Reviewed
$104.95
The GM LS Series engines are being built for a lot of different performance and racing applications. You can see good ol' hot rodder ingenuity taking place as racers are running carburetors and even using distributors on these engines! These MSD LSx trigger converters plug into the factory crank sensor of an LS engine. They then convert the factory trigger signal into a 12 V square wave signal to trigger an MSD ignition control such as a 6 or 7 Series ignition control. If you are incorporating a front mount distributor into your LS engine, this means that you won't need to run an external crank trigger.
( 3 )
$52.69
These Volant Vortice throttle body spacers are designed to squeeze a little more performance out of your car or truck. These throttle body spacers are made of an extremely durable, glass-filled nylon composite that will not corrode or deteriorate due to the elements. Volant designed these throttle body spacers to work with either your factory air box or Volant's own cold air intake to provide quicker throttle response and, in most applications, improved fuel economy. Volant provides all of the mounting hardware and gaskets required for your application to make installing your Vortice throttle body spacers easy.
( 44 )
$71.90
Edelbrock LS3 1-Bar MAP sensors are designed to fit Chevrolet LS3 applications that use an Edelbrock LS3 XT intake manifold or any other factory-style intake that has a 12mm MAP sensor port hole. These MAP sensors should also replace the 1-bar MAP sensor on factory LS3 applications when an Edelbrock Pro-Flo 4 EFI system has been installed in order to provide a compatible calibration during installation and tuning.
Not Yet Reviewed
$55.95
Summit Bucks
Clearance
ACDelco fuel rails help restore factory performance to your ride. These multi-port fuel injector rails feature quality materials and designs to perfectly replace your malfunctioning OEM units. More than 80 models are available for fitment on vehicles from the 1990s and up. Distribute fuel to all injectors properly for better engine performance and reliable durability; order the rails recommended for your application.
( 11 )
$113.99
$72.50
On Sale
MSD Atomic AirForce throttle body adapters are designed to attach an OEM LS1/LS6 factory throttle body to an MSD Atomic AirForce polymer intake manifold. They're made from quality materials and install onto the MSD Atomic AirForce with no modifications.
( 1 )
$77.85
$58.39
Summit Bucks
ACDelco GM Genuine Parts fuel rail components are factory-recommended replacements for one or more of the following vehicle systems: ignition, and/or engine fuel management. From supply lines to crossover lines and more, these original equipment parts will provide the same performance, durability, and service life you expect from General Motors. Order the model designed for your application.
Not Yet Reviewed
$65.99
ICT Billet offers wiring harness extensions for use with many Chevrolet LS-based engine applications from 1997 and up. These connectors are available in a variety of lengths, with 2, 3, 4, 8, or 10 pins. They can help with installing camshaft sensors, alternators, throttle pedals, throttle bodies, temperature sensors, MAP sensors, EVAP solenoids, and more. Each harness extension is made from factory-style materials and specs to ensure proper connection and optimum performance.
( 2 )
$91.99
Beck/Arnley offers fuel injection pulsation dampers for a wide range of vehicles. The opening and closing of fuel injectors creates pressure pulses in the fuel rail which can lead to unstable fuel pressure. These dampers absorb the pulsing of fuel, smoothing out the pulses to help keep pressure consistent. The replacement dampers are made from factory-style materials and specifications to ensure a proper fit and long-lasting performance. Order the model recommended for your application.
Not Yet Reviewed
$69.99
On Sale
Holley throttle cable brackets are a nice finishing touch for street rods, street machines, or street/strip cars and trucks. The brackets are available in a variety of mounting styles, and for use with nearly a dozen carburetor models. Brackets for fuel injection style applications are also offered. Choose from among materials and finishes like anodized aluminum and chrome or plated steel. These throttle cable accessories can be ordered for universal or carb-specific replacement.
( 186 )
$59.25
$53.35
FAST LSXR LS3/LS7 fuel injector spacers are designed to extend your short OEM fuel injectors to the same length as the longer-style injectors. These kits include spacers and O-rings.
( 18 )
$55.95
Add Delphi fuel injection idle air control valves to control the airflow into your engine. Delphi OE replacement valves provide a superior fit and finish that result in an easier installation for you. Their idle air control valves meet federal emissions regulations, increase your fuel efficiency, and eliminate the potential for malfunctions. Get control over the amount of air allowed to flow into your engine, and your engine idle speed, in a variety of load conditions when you replace your air control valves with Delphi fuel injection idle air control valves.
( 34 )
$76.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
