Availability
Showing In Stock Items. Show All 22 Items.
These Trick Flow® LT1 air inlet elbows are designed to replace the ugly stock rubber air inlet elbow. They not only add a little bit of dress-up under the hood, but they also eliminate the factory resonator tube and include all provisions for using the factory sensors. These elbows are designed for use with SLP-type airfoils and are sized to work with stock air inlet systems. They will work with most brands of cold air kits, too.
( 45 )
$82.99
—
$103.99
S&B Filters intake boot kits are built to last a lifetime. All boots come with stainless steel hose clamps so you don't have to reuse the old OEM clamps. These kits are available with different components for use on a variety of Ford F-250 and F-350 trucks from the mid-1990s. Here are the contents: * MODEL SBF-83-2012: Comes with (2) stainless steel hose clamps. Direct replacement for the failure-prone orange turbo intake boot found on 1994-96 OBS Powerstroke trucks. Does not fit E Series vans or 1997 trucks equipped with the black turbo intake boot. S&B Intake boot is made with four plies of aramid reinforcement and extremely strong silicone rubber to last the lifetime of your vehicle. Replaces Ford turbo inlet 1820102C2. * MODEL SBF-83-2013: Comes with (4) T-bolt clamps and (4) hose clamps. Only use the T-bolt clamps for the lower spider clamp locations if they have been reinforced with Riff Raff Plenum inserts. Use the hose clamps if they have not been reinforced. You will have two clamps left over after the install. The turbo intake hose only replaces the factory orange boot and will not fit E-Series vans or 1997 OBS trucks with the black turbo intake boot. The S&B turbo boot and intake manifold plenum boots made with aramid reinforcement and extremely strong silicone rubber to last the lifetime of your vehicle. Replaces Ford turbo inlet 1820102C2 and intake manifold boots F6TZ-6C640-A.
Not Yet Reviewed
$69.00
Interested in more power? aFe Dynamic air scoops will take your already-great Dodge Challenger to the next level! These additions make better use of your factory "air catcher" headlight inlet by guiding cool ambient air from outside the vehicle directly into your intake system—and we all know the effect of more cool, dense air: increased performance and power! Constructed of cross-linked polyethylene, these Dynamic air scoops work with both factory and aFe Momentum GT intake systems; just snap into the air box, with no modifications required. Order the air scoop designed for your Challenger year and submodel application.
( 16 )
$54.00
Over time, factory air intake hoses become brittle and crack. Plus, many of them are arguably some of the most aesthetically challenged OEM parts in the engine bay. Replace leak-prone factory hoses with COBB Tuning air intake hoses that feature 4-ply silicone construction with the right compliance to deal with the violent motions of high performance engines being driven in anger. They balance form and function with their smart appearance and turbulence-taming slick interiors. COBB Tuning air intake hoses also feature: * Drop-in replacement for OE hoses that stay put and look great * Sleek exterior is easy on the eyes * Decreased turbulence in the intake tract is airflow friendly * Pad-printed COBB logo * Select applications include lined worm-drive clamps * Steel-reinforced post MAF hoses won't collapse at full throttle * Available to fit stock or aftermarket intercoolers * Fit stock air boxes and COBB SF Intakes (sold separately) * Some applications require a COBB SF Intake
Not Yet Reviewed
$95.00
Dinan offers turbo inlet fit kits are required to fit the Dinan turbo inlet (D760-0061) to the B58 'G' Chassis 5/6/7/8/X intake (D760-0068) on a variety of BMW applications. Kits include O-ring, spring clip, and a custom silicon hose for easy installation. NOTE: For B58 'G' chassis 5/6/7/8/X owners that wish to run the Dinan turbo inlet (D760-0061) for maximum sound, the appropriate Dinan intake (D760-0068) as well as the associated inlet fit kit (D763-0100) are required. The Dinan turbo inlet will NOT mate with the factory intake system.
Not Yet Reviewed
$69.95
On Sale
Spectre Performance cold air intake kits provide better acceleration and fuel economy for your truck or SUV. They're designed to replace your factory air filter and air box assembly, eliminating the restriction as they smooth and straighten airflow. The high-flow design of these intakes enables your engine to breathe in a larger volume of air, resulting in more usable power throughout the engine's entire rpm range. Hundreds of models are available, with various tube and filter options. Choose the kit tailored for fitment and performance on your make/model application.
( 834 )
$64.99
On Sale
Some L5P 6.6L Duramax vehicles have a secondary MAP sensor. The problem: Its direct placement into the intake air stream from the factory causes the soot buildup to become an ongoing maintenance problem, requiring routine cleaning or replacement of the sensor. The solution: Fleece Performance secondary MAP sensor spacers. They move the sensor from the direct intake air stream to reduce soot buildup over time and eliminate the need to routinely clean or replace the sensor. Each kit includes mounting block (spacer), fastener, and O-ring.
Not Yet Reviewed
$68.99
$58.64
For better performance, upgrade your stock intake with aFe Torque Booster air intake tubes. They are the perfect replacement for the aging, brittle factory intake tube and include all necessary hardware for a hassle-free install. The tubes are designed to reduce heat transfer to the incoming air charge, which helps keep the air cooler and promotes better engine efficiency. They primarily benefit vehicles by increasing horsepower and torque through improved airflow, leading to better acceleration and throttle response. These air intake tubes are constructed with durable materials, making them resistant to high temperatures and cracking, and are often designed as a direct replacement for factory parts, requiring no cutting or drilling for quick installation. aFe Power also offers a hi-temp silicone Magnum Force Torque Booster Tubes for 1999.5-2003 Ford Diesel Trucks with V8-7.3L (td) engine. This torque booster tube is the perfect way to connect the crankcase vent adaptor to the factory turbocharger. Select the aFe Torque Booster air intake tubes designed for your application needs.
( 3 )
$82.00
—
$93.00
Rein Automotive OE quality engine air intake hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacement for your vehicle's factory original parts, these hoses are identical to the Original Equipment Manufacturers in fit, form, and function. Order the Rein engine air intake hoses designed to fit your application.
( 1 )
$66.99
—
$76.99
Mishimoto throttle body hoses can handle the pressure. Your factory rubber hose is okay, but not good enough when running increased boost pressures. These direct-fit, high-strength, 100 percent silicone replacements provide the increased stamina and heat tolerance you need. With 5-layers of silicone and embedded heat-resistant fibers, they can withstand substantial pressures, and are equipped with a position indicator for a simpler install. They are available in a choice of colors. Replace failure-prone stock hoses with those that have the "guts" to succeed--Mishimoto throttle body hoses.
Not Yet Reviewed
$76.95
Steeda cold air intake restrictors allow you to add horsepower and torque to your Mustang, while maintaining your factory tune. They'll give you increased power for your daily driving needs with regular gas. And, since they can be easily removed or installed, you can use them at the track to run performance tunes, with no computer flash required. Your car will still produce up to 10 hp and 10 ft.-lbs. of torque to the rear tires with 87 octane fuel. Check applications for compatibility.
Not Yet Reviewed
$94.95
On Sale
The APR throttle body coupler is a comprehensive, direct replacement upgrade to the factory rubber hose found in the charge piping system. The system includes a multitude of enhancements designed for maximum performance, longevity and insurance against power robbing boost leaks. This specific coupler is fully compatible with the OEM and upgraded APR Intercooler system, OEM throttle body and all OEM turbochargers.
Not Yet Reviewed
$54.95
On Sale
Stillen is pleased to offer Z-Tubes as a solution for the cracked intake piping for the Infiniti G35 and FX35 vehicles. Made of a roto-mold plastic, these Z-Tube intake ducts offer excellent insulation properties, repelling heat coming off the surface of the engine. As a result the cold intake power increases dramatically. Order the model designed for your vehicle. Features and benefits: * Z-Tube constructed of roto-molded plastic * Allow for connections for factory breather tubes * Eliminates factory baffling, increasing flow efficiency and eliminating torn factory coupler issues * Offers increased throttle response
Not Yet Reviewed
$85.91
$68.73
On Sale
APR throttle body inlet system is a comprehensive upgrade to the factory charge pipe system from the intercooler outlet to the throttle body. APR replaces all the components and provide a new, larger, free flowing system that flows roughly 34 percent more than stock. This was achieved by increasing the cross-sectional area of the system and by reducing the tight radius bend directly in front of the throttle body. This system does away with two potential boost leak points thanks to their single cast design. They have upgraded the intercooler outlet hose to a multiply wire-reinforced silicone design with T-bolt clamps that resist boost leak over the stock counterpart. APR's new billet throttle body to manifold adapter provides a convenient boost and vacuum reference point which can be used to for a gauge or anything else that suits your build. Lastly the system comes complete with new throttle body and intake manifold gaskets, which are common leak points many never know to address.
Not Yet Reviewed
$168.55
—
$222.95
$74.95
—
$99.95
On Sale
APR offers air intake components for an easy and affordable way to replace your worn-out or missing parts. Each piece is designed with the original factory shape to ensure an authentic look to meet your needs. Order the APR air intake components best suited to provide the optimal fit, form, and function for your ride!
( 1 )
$79.95
aFe Dynamic air scoops deliver high-speed airflow to improve your vehicle's performance and throttle response. The scoops are available in lightweight powdercoated aluminum for a clean appearance, as well as plastic and a high-gloss, clearcoated twill weave carbon fiber that offers great strength, less weight, and aggressive looks. Any of the aFe choices install easily with the necessary hardware included—and will lower intake air temperatures by forcing more cool air from your front grille into your intake system. The scoops are available in a variety of configurations for fitment on specific vehicle applications.
( 11 )
$76.00
—
$99.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
