Availability
Proper toe settings aid in directional stability and proper tire wear. These SPC Performance wheel toe bar tools will eliminate vehicle wandering and uneven tire wear. They feature an aluminum bar that uses sliding adjusters with pointers to correctly measure the vehicle's toe. SPC Performance wheel toe bar tools are available with a scribe assembly that is designed for marking a specific area for exacting measurements.
( 6 )
$106.99
—
$109.99
Even out your tire tread wear with these SPC Performance camber tools. They are designed to easily adjust the camber on your vehicle. The tools are application-specific, so you can be sure that they will work on your vehicle. Make fast, easy, accurate camber changes with one of these SPC Performance camber tools.
( 3 )
$72.99
—
$93.99
These SPC Performance toe tools make adjustments quickly and accurately. They are available in a variety of styles and configurations to fit your specific vehicle. Easily used with normal hand tools, these SPC Performance toe tools are sure to get your vehicle aligned in no time.
Not Yet Reviewed
$62.99
—
$82.99
CV boots take a lot of abuse. When it's time for a change, SPC Performance CV boot clamp installation tools make the replacement process a breeze. Designed for low-profile clamps holding the CV boot on FWD vehicles, these sets come complete with the install tool and a ratchet. Having the correct tool for any job makes the task a lot easier--as proven time and again by SPC Performance CV boot clamp installation tools.
( 1 )
$73.99
These SPC Performance tie rod adjusting tools are designed to adjust vehicles with split tie rod sleeves. They are available in different configurations to fit most standard size passenger cars and light trucks. Save yourself time and money with one of these SPC Performance tie rod adjusting tools.
( 3 )
$84.99
SPC Performance rear toe adjusting tools provide a means to precisely adjust the rear toe angle on various vehicle make and models. These specialized tools work by interacting with vehicle-specific mechanisms, such as control arm sprockets, threaded tie rods, or adjustment brackets, to allow technicians to correct alignment issues. Their purpose is to restore proper toe settings, which can prevent premature tire wear and ensure correct vehicle handling. Order the tool designed for your vehicle make and model.
Not Yet Reviewed
$56.99
SPC Performance 4-way ball joint separators are all you need for easier ball joint removal. These tools have a unique design that allows them to be adjusted to remove ball joints of various heights--no need for multiple tools. A job that previously was a hassle is now affordable and easy with strong SPC Performance 4-way ball joint separators.
( 5 )
$79.99
SPC Performance steering wheel holders are a must for proper alignments. The tools are designed to securely hold the steering wheel and its covered hooks and base, to prevent damage to the steering wheel or seat. The tools are made of quality materials and are designed to be used according to the directions packaged with this product. For automotive equipment solutions, choose SPC Performance.
Not Yet Reviewed
$69.99
If you're having trouble with threads on your ball joint press, then you may need one of these SPC Performance replacement ball joint press C frame forcing screws. They feature a hex end for your socket attachment and a special end that fits into the ball joint that you're installing or removing.
Not Yet Reviewed
$52.99
—
$74.99
SPC Performance FasTrax stud extenders will add 3.5 in. more clearance to the guide studs on your FasTrax gauge. They are perfect for vehicles with large center hubs that interfere with the installation of the FasTrax camber caster gauges.
Not Yet Reviewed
$99.99
These SPC Performance cam knockout punches are designed for removing the alignment inserts on the upper control arm alignment brackets without damaging the bracket. They are made from heavy-duty steel and are perfect for pickup trucks and SUVs.
( 1 )
$85.99
These SPC Performance internal coil spring compressors can fit inside of most coil springs with an internally mounted shock. They can accommodate springs from 8 1/4 in. to 14 in. total length and 3 3/8 in. to 5 5/8 in. inside diameter. Save time and money with one of these SPC Performance internal coil spring compressors.
( 18 )
$89.99
These SPC Performance Mopar ball joint sockets are designed to install screw-in ball joints on light trucks, SUVs, and vans. They feature steel construction, a 3/4 in. square drive, and a 4-point design with a shallow spline socket head. Pick up one of these SPC Performance Mopar ball joint sockets and install your ball joints the easy way.
( 2 )
$69.99
—
$76.99
These SPC Performance inner tie rod end removal sockets are designed for removing your vehicle's tie rod ends. They are available in different sizes and styles to fit specific vehicles. Don't bust any more knuckles--pick up one of these SPC Performance inner tie rod end removal sockets and protect yourself.
Not Yet Reviewed
$99.99
These SPC Performance replacement ball joint press C frames will replace your bent or damaged frame. Their unique design allows you to remove and install the ball joints without removing the control arm from the vehicle.
Not Yet Reviewed
$97.99
—
$105.99
These SPC Performance wheel spreaders are designed to take the play out of your front wheels during alignment. Just place the spreaders between the tires, and their spring-loaded pressure will help to ensure a more accurate alignment.
Not Yet Reviewed
$90.99
If you're missing or need a specific size of ball joint adapter receiving tubes, SPC Performance offers these replacements. They are available in different outside and inside diameters to fit your specific application. Made from hardened steel, the receiving tubes can stand up to daily use without failure.
Not Yet Reviewed
$50.99
These SPC Performance replacement ball joint adapter installing/receiving cups and adapters will help make sure that your ball joints are removed and installed correctly. They are made from heavy-duty steel and can be used on most 2WD and 4WD pickup trucks, vans, and SUVs.
Not Yet Reviewed
$102.99
These SPC Performance 5 in. tie rod pullers are designed to remove old tie rod ends with a straight, fast, firm pull. They feature a 2 1/4 in. reach and a 2 1/2 in. spread and can also be used for pressing bushings from control and trailing arms.
Not Yet Reviewed
$105.99
SPC Performance rotary file bits are ideal for elongating slots in aluminum and steel frames and brackets on most vehicles. The bits are manufactured from high-quality carbide and are designed for use with high-speed drills. These sets include SPC Performance's Cool Tool II fluid for reduced stress on the bits' teeth, prolonging the life of the cutting bits. SPC Performance has been designing, testing, and manufacturing world-class alignment and suspension parts and tools since 1971.
Not Yet Reviewed
$69.99
SPC Performance flange-type axle pullers are versatile tools, designed to be used as wheel or hub pullers, as well as axle pullers. They have a bolt circle range from 4 1/2 to 5 1/2 in., which covers all cars and small trucks with flange-type axles. The pullers feature four slots that allow them to be used on 4, 5, and 6-stud designs—and include a yoke and center rod assembly, a jam nut, and a hammer.
( 2 )
$97.99
Light Racing flared hole dies strengthen and lighten your chassis. Used in sheet metal fabrications to provide rigidity and strength to flat, unsupported panels, they're manufactured from high-quality hardened tool steel and can flare holes up to 0.090 in. using chromoly or 0.125 in. using mild steel. Beginning with comprehensive finite element analysis supported by extensive prototype testing, the Light Racing flared hole dies are engineered to provide the optimum combination of performance attributes.
( 5 )
$54.99
—
$101.99
SPC Performance ball joint separator kits provide five tools in one, making them very handy and cost-effective. Each kit consists of three drop-forged forks and two handles--one handle for use with a hammer and one designed to fit an air hammer. The forks are threaded to interchange with either handle. SPC Performance ball joint separator kits include three forks of 11/16 in., 15/16 in., and 1 1/8 in. openings.
Not Yet Reviewed
$75.99
These SPC Performance pitman arm pullers are adjustable and have rugged, forged jaws shaped to fit the job. They feature two clamp bolts that lock the jaws onto the pitman arms to ensure a positive grip. Easily used with normal hand tools, SPC Performance pitman arm pullers will save you time and money each and every time.
Not Yet Reviewed
$99.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
