Availability
With Russell tee adapter fittings, you can connect just about any hose or line to any other hose or line. For instance, they're ideal for tapping off an existing line or hose or connecting a line to a fuel regulator or some other fluid-system component. The possibilities seem almost limitless. What's more, they're available in both stainless steel and blue anodized aluminum to suit your needs and your budget.
( 16 )
$51.95
Russell's ProFlex hose series represents the ultimate in mandrel-produced, stainless steel, wire braid hose. It has a unique CPE inner liner that's compatible with synthetic lubricants and hydrocarbon racing fuels. ProFlex hose is perfectly matched for use with Russell full-flow hose ends (taper design). It also features temperature ranges of -40 to +350 degrees F for a wider variety of uses and routing. Order the length and diameter needed for your application.
( 149 )
$51.95
—
$119.95
Russell street legal brake line kits will improve your braking performance for competition or everyday driving. Replacing spongy or brittle factory rubber brake lines with Russell hoses will reduce hose expansion for firmer, more responsive braking. These kits feature stainless steel braised hose with zinc-plated fittings—and are factory assembled for convenient bolt-on installation. The components meet strict DOT requirements for street-driven vehicles. Russell brake line kits are available for a wide range of specific domestic, import, truck, and SUV applications.
( 488 )
$70.95
—
$121.95
Summit Bucks
These Russell ProClassic II dual fuel inlet kits feature an all-black, nylon fiber braided outer cover over a chlorinated polyethylene (CPE) synthetic rubber inner line for abrasion resistance. The CPE inner liner incorporates a bonded, multi-braid stainless wire that improves the bend radius with less possibility of collapsing when the routing hoses are in tight areas. They are safe for use with fuel, oil, and antifreeze. To complement this new hose, the ProClassic II dual fuel inlet kits also feature aluminum black anodized hose ends. If a high-quality, traditional looking hose is what you're seeking, Russell ProClassic II dual fuel inlet kits are the answer.
( 9 )
$54.95
Summit Bucks
Russell's dual fuel inlets for Holley and Demon carburetors are fully assembled and ready for installation. They feature stainless steel braided hose construction with anodized AN fittings and fuel bowl washers.
( 35 )
$54.95
—
$103.95
Summit Bucks
Russell dual fuel inlets for Holley and Demon carburetors are fully assembled and ready for installation. They feature lightweight Russel ProClassic hose construction with black anodized AN fittings, and fuel bowl washers.
( 25 )
$63.95
—
$64.95
For the traditionalist, Russell offers their ProClassic II black hose. If your belief is that the hose you use to plumb your ride or racer should be black, then ProClassic II is for you. The all-black nylon fiber braid of the outer cover wraps around a CPE synthetic inner liner for abrasion resistance. Plus, the chlorinated polyethylene inner liner has a bonded, multi-braid stainless steel wire to improve the bend radius, with less possibility of collapsing when plumbing those tight areas. Safe for fuel, oil, antifreeze, and other fluids, Russell hose is easy to cut and easy to assemble. For classic looks and professional quality you can count on under the hood, choose Russell ProClassic II hose—available in a variety of lengths and AN sizes.
( 39 )
$51.95
—
$127.99
Russell's nitrous and fuel line hose assemblies are manufactured at the Russell facility and assembled by dedicated professionals. All nitrous hose assemblies are constructed using Power-Flex stainless steel braided hose. The hose ends feature a precision-crimp installation, using a hydraulic crimping method that provides the ultimate leak-free connection. Russell recommends using the hose assemblies with blue fittings for nitrous applications, and the hose assemblies with red fittings for fuel. Dozens of length and size options are available.
( 94 )
$51.95
—
$109.95
Tube nuts from Russell will make the installation of aftermarket steel or aluminum line to your factory hard lines a snap, saving you time and money. They are manufactured from aerospace aluminum or steel and are available in either a protective anodized blue or a new Endura finish.
( 14 )
$101.95
For the enthusiast looking for a quality performance hose, while also wanting to save assembly time and money, Russell Twist-Lok hose is the way to go. Easy to assemble, flexible and lightweight, it is ideal for most automotive applications where a stainless steel braided line is not necessary. This synthetic rubber hose is pressure-rated up to 250 psi and suitable for most fuel and oil systems. It's available in a variety of lengths, diameters, colors, and AN sizes.
( 52 )
$67.95
—
$108.95
Russell check valves are designed to allow flow in one direction and prevent flow back. They feature a 304 stainless steel check piston that delivers optimum flow with minimal restriction and pressure loss. A positive O-ring seal is incorporated into the high-flow check piston. These valves are ideal for fuel systems due to their low opening pressure of 3 psi. Russell check valves are offered in a choice of sizes to meet your needs.
( 11 )
$52.95
Russell ARB stainless hose kits replace your OEM lines with renewed performance. They offer your differential carrier setup greater durability—and they won't pinch in tight bends. These kits also include ARB air locker fittings to create your own assemblies. The choice is plastic or stainless? The decision is easy--Russell ARB stainless hose kits, available in multiple lengths to accommodate different axle applications.
( 3 )
$51.95
—
$74.95
Summit Bucks
Replace your original fuel lines with Russell Performance pre-fitted fuel pump to carburetor kits. These universal, easy-to-install kits are available for several applications. Russel fuel hose kits include big bore carb bowl fittings, fuel pump adapters, two aluminum, red/blue anodized full flow hose ends and a pre-cut length of ProFlex braided hose. Do your plumbing right with Russell pre-fitted fuel pump to carburetor kits.
( 10 )
$51.95
—
$61.95
For high-pressure brake lines, Russell PowerFlex hoses are the preferred choice. When used in conjunction with PowerFlex hose ends, the end result is a durable and professional hose that resists leaks, providing years of service. With a PTFE inner liner featuring 308 stainless steel braid, and a 2,500 psi rating, what more can you ask for?
( 44 )
$51.95
—
$120.95
Russell aluminum fuel lines are an economical way to finish any performance fuel system. They're easy to form and come available in popular sizes to complement any street machine.
( 8 )
$68.95
—
$71.95
Summit Bucks
Russell tunnel ram plumbing kits are designed for a "high-rise" or tunnel ram with dual carburetors. These kits include the Y-block, fittings, balanced-flow fuel block, hose ends, and ProFlex hose.
Not Yet Reviewed
$70.95
This new Russell ProClassic hose is designed for racers and performance enthusiasts who want high-quality plumbing that is lighter and easier to assemble than traditional braided stainless steel hose. It features a lightweight nylon fiber braid over a durable synthetic rubber core with a maximum pressure rating of 350 psi. Russell ProClassic hose is capable of handling nearly every plumbing task on your vehicle and is safe for water, oil, and antifreeze. The hose is easy to cut, making for quick, easy assembly. Available in a variety of hose sizes and lengths, this Russell ProClassic hose can be used in many different areas.
( 68 )
$50.95
—
$101.95
Summit Bucks
Russell stainless steel braided fuel hose kits are quality-engineered to replace stock fuel hoses and come to you complete and ready to run. Their stainless steel outer braid is built tough to resist abrasion and corrosion and the kits are designed with anodized aluminum hose ends. Best of all, they easily connect to OE components for a very professional and reliable installation that lasts!
( 30 )
$59.95
—
$61.95
Russell stainless steel fuel line kits for Mustangs come complete and ready to run. They feature Russell stainless braided hose and anodized aluminum hose ends. The kits are designed to replace the pressure and return lines at the fuel rail. The stainless steel outer braid resists abrasion and corrosion, offering maximum protection and reliability. Their CPE synthetic rubber liner with a nylon inner braid is compatible with all hydrocarbon and alcohol-based fuels.
( 5 )
$85.95
Are you working on a ground-up custom or doing a handlebar change? Russell Cycleflex brake hoses are the perfect choice. These hoses are factory-assembled in stock or extended lengths for a more simple installation. Cycleflex brake hoses include a clear coat cover to ensure against abrasion, while also giving your bike a professional look.
( 8 )
$64.50
—
$98.99
Summit Bucks
These Russell stainless steel fuel line kits suitable for Honda®/Acura® come complete and ready to run. They feature Russell stainless braided hose and anodized aluminum hose ends. The kits are designed to replace the pressure line between the fuel rail and fuel filter. Their stainless steel outer braid resists abrasion and corrosion, offering maximum protection and reliability. Their CPE synthetic rubber liner with a nylon inner braid is compatible with all hydrocarbon and alcohol-based fuels.
( 1 )
$54.95
With a twist of the wrist, you can fine-tune your brake bias with these pocket-sized Russell brake proportioning valves. They're manufactured from billet aluminum, have anti-corrosive brass internal components, and can drop line pressures by as much as 60 percent. They feature an anodized finish, and 3/8 in.-24 threaded line adapters and 3/16 in. hard tube adapters are included.
( 2 )
$71.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
