Availability
These mounts are made for racing. Moroso solid steel motor mounts replace stock, OEM-style rubber mounts to prevent torque loss and binding linkages, a common result of excessive engine movement. These solid steel mounts eliminate the need for bulky torque straps and chains and are covered with a protective zinc coating.
( 135 )
$53.58
—
$83.99
Moroso remote oil filter mounts give you the freedom to mount your oil filter in an easier place to access. They are made of cast aluminum and feature a center port that can be used for an oil pressure or temperature gauge.
( 18 )
$71.99
—
$80.99
Moroso motor mount shim kits are used to make slight adjustments to engine height to compensate for minor oil pan, linkage, and header interference. They feature a standard Chevy bolt pattern.
( 9 )
$65.99
Moroso vacuum pump mounting brackets are a great way to eliminate the difficulties of vacuum pump installation. Designed to fit Moroso original or enhanced design vacuum pumps, they come available for a variety of engines and mounting locations.
( 3 )
$91.32
—
$108.99
Moroso universal mounting brackets are manufactured from billet aluminum and are designed to fit Moroso 3 1/8 in. diameter tanks. They are adjustable, offer an easy attachment, and the set screw prevents the tank from loosening.
( 3 )
$71.99
Moroso push/pull battery disconnect mounting kits allow you to mount a battery disconnect switch to a roll cage tube with a weld-on bracket, then actuate it with the provided T-handle protruding through the rear panel of the vehicle. They include the correct brackets, swing arm linkage, an 18 in. long black anodized aluminum actuator tube link, and the necessary bushings and mounting hardware for installation.
( 8 )
$93.99
Moroso remote thermostat housing mounting brackets are beautiful supports. Designed to mount their remote thermostat housings, they are manufactured from 6061 T-6 aluminum to be strong and good looking.
Not Yet Reviewed
$60.99
Moroso front housing mount adapters are designed for use on Jesel front drive distributors. These high temperature and performance caps are vented to prevent ozone buildup. Moroso has all of the components and replacement parts that you need to keep your Circle Track car's ignition system performing at its best.
Not Yet Reviewed
$62.99
Moroso is one of the worlds most respected suppliers of automotive equipment for racing and street performance applications. These vacuum pump mounting hardware kits are designed specifically to secure Moroso pump models to the engine. The screws, standoffs, washers, and other accessories are machined from materials selected to withstand the rigorous demands of racing. Order the mounting hardware for your application needs.
Not Yet Reviewed
$56.99
Moroso power steering pump mounting brackets allow you to mount your power steering based on your application needs. These brackets are manufactured from 3/8 in. 6061-T6 aluminum and then blue anodized for a beautiful finish.
( 1 )
$95.99
Don't settle for flimsy alternator brackets when you can put on a heavy-duty alternator bracket from Moroso. Their stout construction keeps your belts in line under extreme loads and rpms. They're available for a variety of engines and alternator locations. Mounting hardware is included, unless otherwise noted.
( 48 )
$87.99
—
$90.99
Moroso engine oil filter adapters for GM LS are designed to replace the factory spin-on oil filter mount on your engine, allowing for different type plumbing options than what was initially provided with the specific oil pan model originally. These billet aluminum spin-on style oil filter adapters feature an anodized finish with an NPT oil pressure port, and include the mounting hardware and engine block sealing O-rings. Order the model best suited for your vehicle.
( 2 )
$102.95
Moroso breather tanks are great for low vacuum venting. They're offered in a choice of sizes to suit your application needs, and may be modified for additional fitting for dual vent hoses. These high-strength, lightweight aluminum breather tanks feature a 2 in. breather filter mounted on top and an aluminum bottom drain fitting and ball valve.
( 110 )
$57.99
—
$84.99
Moroso carburetor work stands offer the ideal perch for you to service a vital engine part. Blending the proper amount of air and fuel to power your vehicle is a big responsibility, so you need to be able to reach every inch of the carburetor for fine-tuning. These cast aluminum stands are ideal for maintaining Quadrajets, as well as standard and spread-bore units from Holley. The specialty work stands feature an open center and four convenient mounting pegs. Mechanics and do-it-yourselfers, let Moroso make your job easier!
( 13 )
$62.99
Moroso throttle return spring kits can solve all of your linkage problems. Designed and built rugged enough for competition use, they're made of 14-gauge steel and are chrome plated for hot looks. The kits include heavy and light sets of stainless steel return springs, all mounting hardware, and complete installation instructions.
( 47 )
$54.99
—
$62.99
Moroso supercharger fuel tank cap kits contain the parts necessary to replace broken or missing fuel cap style caps in Moroso or other tanks with this style of cap and neck. Kit can also be used when you're producing a custom tank. The kit includes a black fuel cap, neck, gasket, hardware, and bonded sealing washers (black cap can be used to change out red caps).
( 1 )
$100.99
Special Offer
The new standard in ignition wires for racers on a budget! Moroso Ultra 40 unsleeved custom-fit ignition wire sets are the most powerful and RFI/EMI-resistant wires available for racing today. Plus, their closely woven fiberglass, silicone-impregnated insulation provides up to 8,000 extra volts of protection. Features: * Kevlar® core that's four times stronger than Aramid cores * Class-leading 40 ohms of resistance per foot * Nickel copper alloy conductors for superior spark energy transfer * Extra-thick EPDM layer for greater dielectric strength * High-temperature silicone boots that can withstand heat up to 600 degrees * Locking stainless steel plug terminals
( 139 )
$108.99
Moroso distributor hold-down clamps are extra-thick and heavy duty to ensure adequate retention of distributor housing, and are stud-mounted to eliminate thread wear in the intake manifold. They are slotted for quick distributor removal and include a stud, washer, and nut.
( 25 )
$94.39
These expansion tanks are perfect for cars with low-mount radiators to provide a convenient filling location and to bleed off unwanted air. Versions are now available with rugged 6061-T6 billet aluminum filler necks welded to the tank to withstand the continuous removal and installation of the cap. They're 100 percent pressure- tested to eliminate leaks, and they accept a standard-size radiator cap (not included).
( 104 )
$80.99
Moroso keeps you in the race with these locking transmission dipsticks designed to meet NHRA rule changes. They are custom-designed for each transmission application and work with the shields that are commonly used today. Constructed out of heavy-duty hydraulic tubing, they're welded for a precision fit and are black powdercoated for durability. These dipsticks' threaded knob design stays locked to the tube under high pressure and vibration, and their transmission fitting and seal make it easy to guard against leaks. A full and fill area indicates fluid levels. Moroso transmission dipsticks feature billet aluminum threaded knobs laser-etched with the Moroso logo.
( 13 )
$85.99
—
$100.99
Moroso engine lift plates will allow you to lift your engine up by its intake manifold for easier maneuvering. You can also use them as a manifold cover when you store your engine. These lift plates fit most 4-barrel intake manifolds.
( 4 )
$51.99
Moroso's universal dipstick kits are designed to work with Moroso and other brands of oil pans with a built-in 1/4 in. NPT dipstick provision. Moroso dipsticks feature a universal mounting tab that can be bent or modified to accommodate a wide variety of engine compartment clearances and mounting locations. The dipstick seals to the tube with an O-ring that secures it in place and prevents crankcase gasses from escaping. Moroso universal dipsticks also feature "full" and "fill" marks which can be used as-is, or new marks can be added to indicate your desired engine oil level.
( 86 )
$80.99
Moroso super duty battery disconnect switches, with a rating of 2,000 amps intermittent and 300 amps continuous, are perfect for engines with a large starter draw, RVs, drag cars with alternators, and other applications. Two pairs of copper studs make these switches ideal for disconnecting alternators or other electrical devices in addition to the battery. They feature sealed shafts, which keep out moisture and debris, and the indexing pins align the switches with the mounting panels to prevent rotation. These super duty battery disconnecting switches include switch position face plates and decals to indicate switch location during emergencies. They are for use with Moroso push/pull switches for remote installations.
( 30 )
$106.99
Add a stylish look and a dedicated performance edge with Moroso universal twist-lock dipstick kits. They are designed with an efficient twist-lock design to eliminate oil leakage and oil blowing out of the handle. These dipsticks have a brass adapter that can be adjusted upward or downward on the tube to suit the oil pan's depth and volume. The tube and universal mounting tab can be bent or modified to accommodate engine compartment clearances or mounting location. A rubber capping seal keeps the dipstick secure in the tube and prevents crankcase gases from escaping, and the existing "full" and "fill" dipstick marks can be used as-is, or new marks can be added to indicate the desired oil level.
( 23 )
$82.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
