Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Holley EFI System USB Cables
Holley USB cables are sealed against dirty environments. These connector cables are designed to fit select Holley EFI systems. If your system's ECU is mounted in not-so-clean areas, use Holley sealed USB cables.
( 75 )
$82.49
—
$94.49
Holley Terminator X Wideband Adapter Harnesses
Holley Terminator X wideband adapter harnesses are intended to be used as service components for your Terminator X EFI installation. The Terminator X ECU (electronic control unit) features real-time fuel learn, high impedance injector drivers, an integrated 1bar MAP sensor, and 4 programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, or progressive nitrous control. The Terminator X Max ECU features real-time fuel learn, high impedance injector drivers, an integrated 1bar MAP sensor, electronic transmission control, drive-by-wire throttle body control, and 4 programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. This is the wideband adapter harness only.
( 2 )
$64.15
Holley Trans-Brake Input Protection Modules
Holley trans-brake input protection modules allow for an ECU input to be safely connected directly to the 12 V side of the trans-brake solenoid. They are designed to protect the ECU input from damaging fly-back voltage, which occurs when the trans-brake is released. Not using one of them will cause damage to the ECU over time.
( 4 )
$60.75
Holley GM Distributor Wiring Harness Adapters
Holley GM distributor wiring harness adapters are designed to connect the distributor to the Holley ECU. They fit all digital interactive Holley Pro-Jection and Commander 950 fuel injection systems. The harness adapters will allow the use of the ignition control feature that is part of the Holley ECU.
( 2 )
$60.75
Holley Sniper EFI Input/Output Wiring Harnesses
Holley Sniper EFI input/output wiring harnesses give you the access to two ground trigger inputs and three ground trigger outputs. These harnesses also include the points output, tachometer output, and digital gauge output wires. The input grounds can be used for things, such as A/C kick-on and nitrous stage activation! The output grounds can be used for electronic fan control, or A/C shutdown at wide open throttle. Features: * Wires are individually labeled for easy identification * Two 3 ft. long inputs wires * One 3 ft. long output wire * Two 5 ft. long output wires * One 5 ft. tachometer output * One 3 ft. points output wire * One 5 ft. long digital gauge output for Holley EFI analog gauges
Not Yet Reviewed
$66.09
Holley EFI CAN Adapter Harnesses
Holley EFI CAN adapter harnesses are available in several options. Offered are male to female harnesses in several lengths for Racepak and other external CAN devices, harnesses that adapt 2-pin Holley main harness CAN connectors to newer 4-pin CAN devices, and kits that directly connect Racepak Vnet/Holley to either the J1A (HP and Dominator ECUs) or J3 (Dominator ECU only) connectors. Create secure connections with genuine Holley EFI CAN adapter harnesses.
Not Yet Reviewed
$54.05
—
$94.49
Holley EFI CAN Connector Kits
Muscle car enthusiasts who appreciate performance EFI systems have come to rely on Holley for enhanced power, fuel economy, and overall engine efficiency. To get the benefits of sharing EFI operating system information, you'll need one of these Holley EFI CAN connector kits. Designed for easy installation, CAN extension harnesses make for a quick wiring setup.
( 8 )
$54.05
—
$81.05
Holley Terminator EFI Wiring Harnesses
Holley Terminator EFI wiring harnesses are replacement throttle body wiring harnesses and engine control wiring harnesses for specific Electronic Fuel Injection kits. These relays allow you to perform functions and features that are programmed with your Holley EFI laptop software. The software also contains instructions on how to program them. Holley wiring accessories give you the expertise needed to get the job done right.
( 2 )
$54.05
Holley EFI Sensor Blocks
Holley EFI sensor blocks provide a clean and safe solution for mounting multiple 1/8 in. NPT pressure sensors. Rigidly mounting pressure transducers to your engine is never a good idea. Holley EFI sensor blocks are a better idea. Features include: * Compatible with all transducers that utilize 1/8 in. NPT male threads and 7/8 in. or smaller body/hex diameter * Four independent ports, each with three inlets/outlets, allows for the remote mounting of transducers which eliminates inaccuracies due to vibration and heat * Improve engine bay organization by mounting transducers all in one easy to reach location * Four mounting holes designed for the use of 5/16 in. socket head cap hardware for secure and robust mounting * Crafted from military grade 2024 aluminum * Optimized design weighing only 0.50 lbs. * Anodized black for durability and laser-etched with the Holley EFI logo
( 3 )
$67.49
Holley Main Power Harnesses
Holley main power ignition harnesses are designed for use with your Holly EFI systems. These wiring harnesses work with other Holley components to correctly configure your EFI system.
( 1 )
$61.85
On Sale
Holley Water/Methanol Injection Driver Modules
Holley water/methanol injection driver modules are designed to be used with HP EFI or a Dominator EFI ECUs. They will drive up to two water or methanol solenoids and are made out of high-quality materials to ensure long-lasting durability and performance. So, if you're in the market for a high-current water/methanol peak and hold module, Holley water/methanol injection driver modules are what you need.
Not Yet Reviewed
$156.95
$88.61
Holley Commander 950 Replacement Air Temperature Sensors
Holley Commander 950 air temperature sensors are designed as direct replacements for those in your Commander 950 fuel injection system. They screw into the intake plenum.
( 11 )
$58.95
Holley Sniper 1 EFI to Sniper 2 EFI Adapter Harnesses
Want to make the switch from the original Sniper EFI to Sniper 2 and don't want to rewire your system? This harness is designed to do exactly that! The Holley Sniper adapter harness is a plug-and-play solution to connect your existing Sniper 1 wiring harness to a Sniper 2 throttle body! It can be used with any Sniper 2 system that is not equipped with a power distribution module (PDM). Simply remove your Sniper EFI throttle body from the intake manifold, unplug all of the connectors, and plug the Sniper EFI 2 adapter harness into your existing main harness. Cycle your ignition key, run a fresh wizard on the display of your choosing, and enjoy the benefits of Sniper EFI 2. Make the switch to Sniper 2 in minutes! Sniper EFI 2 is a high performance electronic fuel injection system designed for a wide range of engines and horsepower goals. It provides improved engine performance, better fuel efficiency, and easier starting, making it the perfect upgrade for any enthusiast looking to take their ride to the next level. With its easy installation and advanced technology, the Sniper EFI 2 is the ultimate fuel injection system for any conventional V8 engine. Features: * Update your Sniper 1 to Sniper 2 in less than an hour: One-step, plug-and-play upgrade from your existing Sniper EFI install to a Sniper 2 throttle body * Eliminates the need to rewire your existing Sniper EFI installation * The wiring harness included with the Sniper 2 kit will not be used. This adapter is intended to be used with the original Sniper EFI wiring harness and new Sniper 2 EFI throttle body Sniper 2 EFI benefits: * (NEW) Next Generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires)  * (NEW) "Hidden Harness" wiring harnesses exit from the rear of throttle body for a clean appearance  * (NEW) Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V) and 1x tach output  * (NEW) Next Generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection 
( 3 )
$57.49
Holley Timing Cover Fasteners
Secure your timing cover with Holley timing cover fasteners. These steel hex head style threaded bolts are cadmium plated and designed to fit Ford 7.3L Godzilla engines equipped with Holley's high-mount accessory drive system.
Not Yet Reviewed
$52.99
—
$58.89
Holley Power Steering Bracket Add-On Spacer Kits
Set your P/S pump and bracket with the proper clearance using Holley power steering bracket add-on spacer kits. Machined from aluminum, they are available in a natural or black finish, and will work with wet or dry sump. Select the kit for your setup with the preferred finish.
Not Yet Reviewed
$56.75
Holley Idler Pulleys
Holley idler pulleys are designed to help keep your belt in place during high rpm. They are manufactured from quality materials and are available in different designs to fit your specific belt.
( 4 )
$81.09
On Sale
Holley Alternator Brackets
Holley alternator brackets are the perfect solution to mounting your alternator when a new brackets is needed. Made from high-quality materials and available in multiple finishes Holley alternator brackets will look great under the hood of any show car. Order the model recommended for your engine application.
( 2 )
$88.75
Holley Carburetor Bypass Style Fuel Pressure Regulators
Holley carburetor bypass style fuel pressure regulators are designed for systems that require a return line back to the tank. They're used for carbureted applications only, and are preset at 7 psi. The regulators are made of aluminum and feature a natural or black finish.
( 144 )
$81.09
Holley EFI GM-Style Fuel Filter Regulators
Holley EFI GM-style fuel filters have a built-in regulator to provide a simple and clean means to fueling your LS swap. Available with OEM-style or -6AN connections, they feature an internal regulator set at 58 psi, along with an integrated 5 nominal micron rated filter. The bypass design allows you to run one inlet with one outlet to the engine, and a return outlet back to the tank. Holley EFI fuel filter regulators are ideal when performing a LS engine swap or any other fuel injection swap that is designed to run at 58 psi of static pressure. Choose the fuel filter/regulator with the proper connections for your vehicle. Features: * All stainless-steel construction for improved corrosion resistance * Designed with one inlet, one outlet, and one return * Fixed pressure at 58 psi * Nominal micron rating: 5 * Can be used with other EFI systems that require 58 psi * Not recommended with fuel pumps that flow over 450 lph * Return line required for proper regulator operation
( 10 )
$54.59
—
$79.09
Holley Coil-Near-Plug Smart Ignition Coils
Holley Coil-Near-Plug smart ignition coils are designed for use with Holley HP and Dominator ECUs, as well other EFI systems that can drive "smart" ignition coils. Although they are engineered for high-powered race applications, they can be used on street-driven vehicles, as well. They are available individually (includes mating connector and pins) or in kits that include everything you need to upgrade your ignition. Additional tech specs: * Peak voltage: 44,000 V * Peak output: 102 Mj * Maximum battery voltage: 17.0 V * Kits include coils, sub-harnesses, connectors, wires, and a wiring loom Note: Upgrading a non-coil-near-plug main harness requires HLY-558-307 Holley universal coil-on-plug harness, sold separately, to complete the installation.
( 10 )
$94.89
Holley EFI Stealth 4150 Fuel Logs
Holley EFI Stealth 4150 fuel logs provide ample clearance between the fuel hose, and the TPS sensor mounted on the side of the throttle body. For use with either Sniper EFI Stealth 4150 or Terminator X Stealth 4150 systems, these fuel crossovers are easy to install, with their -6 AN male inlet that connects to your existing fuel system. They come pre-assembled by Holley to ensure a leak-free installation.
( 7 )
$76.95
Holley Replacement Idle Air Control Motors
Holley replacement idle air control motors will fit your Holley and Sniper fuel injection systems without any modifications. Designed to be plug-and-play for easy replacement and like-new operation. Order the correct valve for your application today.
( 25 )
$89.65
Holley Coolant Temperature Sensors
Holley offers several coolant temperature sensors designed for use with their Pro-Jection, Sniper, and other fuel injection systems. They feature brass construction with 3/8 in. thread and will provide the ideal fit and function to monitor your engine's coolant temperature. Select the one designed for your system.
( 19 )
$53.05
Holley Sniper EFI Canister Style Ignition Coils
New for the Holley Sniper EFI product line is a factory replacement Sniper EFI canister-style ignition coil. This ignition coil is potted with a premium-grade epoxy, making it perfect for high-vibration environments—and it can be mounted in any direction, even if it's horizontal, vertical, or upside down. "No oil" means "no failure" for multiple mounting positions. The Sniper EFI canister coil is perfect for anyone wanting to upgrade their ignition system, while maintaining a factory look under the hood. Features: * Metal canister is epoxy filled to protect the internal coil windings from high-vibration applications * Improved output coil for electronic ignitions, and MSD ignitions (ballast resistor required for points) * 100:1 turns ratio and lower primary resistance produce high-voltage output
( 6 )
$64.65
