Availability
Plumb your race car with Allstar Performance deluxe nylon brake line kits. These race-proven brake lines are not designed for the street, and they're available for use with or without gauges. Kits feature include 30 ft. of line and push-lock fittings for an easy installation on your race car. Do the job right (and economically) the first time with Allstar deluxe nylon brake line kits.
( 2 )
$96.99
This Castrol SRF brake fluid offered by Allstar Performance has a wet boiling point of 518 degrees F, which exceeds DOT 3 and 4 standards. It is important not to mix Castrol SRF and other brake fluids, as this will reduce the benefits of Castrol SRF.
( 3 )
$86.99
If you need to add brake duct hose to your track or race car, give Allstar Performance brake duct hoses a try! These high-temp hoses direct air from front mounted air ducts to spindle ducts for brake cooling. They are extremely flexible and pliable, but also feature a spring steel wire support to help prevent hose collapse during use. Allstar Performance brake duct hoses are available in three different temperature ranges to suit your specific application needs.
( 45 )
$52.99
—
$99.99
Allstar Performance Granada brake hub/rotors fit the Ford Pinto spindle commonly used on street rods and race cars. These 5-lug rotors are available with 4 1/2 in., 4 3/4 in., or 5 in. bolt circles. The assemblies come with races installed; however, the seal and bearings are not included.
( 2 )
$69.99
—
$98.99
Allstar Performance brake combination valves feature multipurpose valves that are used in brake systems to help properly distribute fluid to front and rear brakes. They also meter the amount of fluid and pressure delivered to each individual brake and provide a connection to the warning light to alert the driver of possible brake failure. These valves are available for different disc and/or drum configurations.
( 12 )
$89.99
Allstar Performance power brake boosters are available in 7 in. and 8 in. diameters and fit Allstar brake pedals, as well as other aftermarket units. These boosters are designed for use with Allstar's ALL41010 master cylinders.
Not Yet Reviewed
$98.99
Replace your factory calipers with new Allstar Performance brake calipers. These stock-style calipers are perfect replacements for most GM applications and will fit up to 1 in. wide rotors. Allstar brake calipers are manufactured from cast iron and are available in big GM and metric series. Get your new brake caliper replacements from Allstar.
( 6 )
$69.99
Allstar Performance brake bias adjusters allow you to easily adjust brake bias from the driver seat to help compensate for changing track conditions. They mount to the balance bars with 3/8 in.-24 threads and come in a heavy-duty crank style or in a cable-style kit with a knob. Choose the model and length needed for your remote brake adjuster application.
( 1 )
$54.99
Allstar Performance directional brake rotors are heavy-duty performers. Offering more strength and more cooling, these 40-vane rotors weigh in at just 11 lbs. and feature ball-milled slots that keep the rotors cleaner. With high performance and great cooling capabilities, Allstar directional brake rotors are a perfect fit for your vehicle. Separate models are available for the left and right side.
Not Yet Reviewed
$99.99
Allstar Performance metric Monte Carlo brake rotors are iron 5-lug hub/rotors with a natural finish that are designed to fit your spindles. They're available in different sizes and bolt pattern specs for fitment on specific applications.
( 2 )
$59.99
—
$95.99
Are you looking for a reduction of un-sprung weight? Allstar Performance late model and modified brake rotors could be your answer. These lightweight solid rotors are scalloped to provide maximum weight loss without compromising braking performance or rotor durability. They're available for front and rear position. Order the size needed for your application.
Not Yet Reviewed
$93.99
Allstar Performance brake line hose kits are available to fit Big GM or metric applications. Kits include everything necessary to complete the connection between a 3/16 in. steel brake line and the brake caliper. Each of these kits includes: * Stainless steel braided hoses * Banjo bolts * Banjo fittings * Crush washers * Steel brake line adapters * Brake line tabs * Brake line clips
( 37 )
$81.99
—
$109.99
Allstar Performance caliper brackets are made from 1/4 in. thick steel and fit 3 in. diameter axle housings. They are designed for use with 11.75 in. diameter rotors, come available for many setups, and are a perfect fit for your project. Allstar caliper brackets are the right parts at the right prices.
( 15 )
$53.99
—
$74.99
Get more weight savings at your wheels with Allstar Performance caliper brackets. CNC-machined from 6061-T6 billet aluminum, these strong yet lightweight brackets offer 3 1/2 in. spacing perfect for your Wilwood Superlite calipers. And, the black anodized finish looks good while providing added durability against the elements. Save some weight with style and Allstar aluminum caliper brackets.
Not Yet Reviewed
$59.99
These Allstar Performance brake shut-off valves allow you to easily control brake fluid flow. They feature a 1/8 in. NPT inlet and outlet and are rated at 2,000 psi for racing applications. The valves have an easy to use plastic handle at the top for quick shut-off.
( 11 )
$69.99
Allstar brake master cylinders are available in either cast iron or aluminum, with 1 in. bores. And, for those of you with vehicles requiring increased volume for proper braking, or experiencing excessive pedal travel with standard bore master cylinders, Allstar also offers big-bore models with 1 1/4 in. bores. They are available with deep hole pistons for power or manual brakes, and they accept a variety of line and fitting configurations. Keep the right amount of fluid flowing to slow and stop safely with Allstar dual-reservoir brake master cylinders.
( 7 )
$79.99
—
$85.99
Allstar Performance universal brake pedal assemblies assist in your conversion of under-the-floor standard single-reservoir master cylinders—to a power dual reservoir master cylinder brake system. The assemblies will accept Allstar 7 in. and 8 in. power brake boosters, and the arms have bronze bushings installed to resist wear.
Not Yet Reviewed
$109.99
Adjust the ratio between front and rear tires with Allstar brake bias gauges. This is a very important adjustment for faster, winning track cars and racers. These gauges help you make the changes necessary before and during the race. These pre-assembled units feature liquid-filled gauges with 1/8 in. NPT male fittings and bleeder valves to evacuate air from gauges. Available in horizontal or vertical styles, Allstar brake bias gauges can help you achieve the right balance to get in and out of the corners quickly.
( 2 )
$71.99
Do you have cracked or damaged brake lines? Allstar Performance replacement brake lines are manufactured from quality nylon materials to ensure performance and longevity. They come available in in 10, 50, and 100 ft. lengths.
Not Yet Reviewed
$69.99
These Allstar Performance electric line lock kits are commonly used to prevent your drag race vehicle from rolling once you've staged or during burnouts in the water box. These electrically controlled valves engage with a switch and hold pressure to the front brakes of your car.
( 14 )
$99.99
—
$104.99
Allstar Performance dash mount pedal assemblies convert floor mounted brake master cylinders to a much more convenient firewall location. They feature a bracket that is drilled to accept Allstar Performance power brake boosters and a dash support bracket. The pedal arm is fully adjustable in 1 1/2 in. increments. If you need to change your pedal setup to better fit your posture, Allstar Performance dash mount pedal assemblies do just that.
( 3 )
$109.99
Toss those rubber hoses away in favor of Allstar Performance braided steel lines. Much more durable than conventional rubber hoses, they easily bend and flex without bursting. The PTFE-coated inner lining is compatible with all fluids; it's wrapped in a braided stainless steel cover to resist abrasion and corrosion. Allstar lines are available in nearly 150 models, with a variety of AN sizes, hose ends, and lengths to meet your needs. Select the braided steel lines designed to fit your application needs.
( 111 )
$53.99
—
$73.99
Allstar Performance analog gauges help you keep an eye on critical data during a race. These lighted mechanical gauges feature white faces with black numbers and red pointers for easy-to-see, easy-to-read information at a glance. Choose water temperature, oil temperature, voltmeter, oil pressure, fuel pressure, or all five for complete data acquisition. They're a perfect fit for your Allstar gauge panels. Get the gauges you need at a price you can afford from Allstar Performance.
( 1 )
$79.99
Allstar Performance quick-disconnect couplings offer no fluid loss or bleeding. Allstar's 2-piece couplings allow your lines to be separated without a loss of fluid or requirement of bleeding. They are available in aluminum with AN threads or steel with NPT threads to use on brake systems when changing a front or rear axle assembly, a hydraulic clutch system using a hydraulic throwout bearing, or when servicing your transmission with an internal hydraulic clutch. Allstar quick-disconnect couplings help plumb your brake system.
( 6 )
$108.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
