Availability
Showing In Stock Items. Show All Items.
TCI speedometer control units are the perfect solution to retrofitting an electronic transmission. These economical adapters pigtail into the electronic speedometer harness and have a connection to power a cable-driven speedometer. They are fully configurable for any tire size and rear gear ratio. Cables made to fit specific transmissions are sold separately.
( 1 )
$587.95
Vortech standard fuel management units are designed for use on multi-point fuel injected engines. They are secondary fuel regulators that install in series with a stock regulator on the return line to the fuel tank. These units increase fuel pressure in proportion to boost pressure (assuming that the pump being utilized has sufficient pressure and flow to deliver the fuel required).
( 2 )
$273.99
Take control of your audio system with a Memphis MXAZ24MC Media Center. Their multi-zone control feature allows users to separately control cabin zone and tower zone speakers, while also maintaining independent subwoofer level control. The large TFT LCD display offers crystal clear viewing and includes a night mode for comfortable operation when the sun goes down. Each unit features a video input, allowing backup cameras to be connected. You can easily stream music via Bluetooth, AUX or USB—or tune into AM/FM radio. These full-featured marine head units also boast built-in adjustable crossovers, independent EQ for Zone 2 output, and assignable Zone 2 feature for ultimate control of your audio system. Additional details: * Dual zone with independent sub control * 3 in. TFT wet bonded color LCD display * Video input * Built-in 4 x 50 watt amplifier * IP66 waterproof design * EEPROM memory * 18 FM presets/ 12 AM presets * 4 pair RCA pre-outputs: Front/Rear/Sub/Zone 2 * Auto-dimmer with day/night mode * Optional wired remote (MXA1MCR) * AM/FM, USB, Bluetooth, and AUX inputs * Separate EQ for Zone 2 output * Assignable Zone 2 output * Built in adjustable crossovers
Not Yet Reviewed
$399.95
CURT RV towing starter kits are ideal for towing a small travel trailer, containing everything you need to hitch up with confidence and maintain superior control on the road. Each kit includes a RockerBall cushion hitch ball and mount, a sway control, an anti-rattle hitch pin, and an Echo mobile brake controller. Towing your camper trailer is easy with these all-in-one kits. They're ideal for vehicles weighing less than 5,000 lbs. and trailers between 3,500 and 5,000 lbs. However, the components within the kits are tested and rated for up to 7,500 lbs. maximum. The included RockerBall cushion hitch ball makes towing smoother and more comfortable—featuring dynamic, adaptive ShockDrop technology. Integrated isolators absorb bumps and vibrations at the hitch connection, promoting increased comfort, confidence and control for the driver. Unlike other cushion hitch options, RockerBall is simple and virtually maintenance-free, yet highly effective. CURT RV camper hitch kits also include a ball mount with 2 in. shank and RockerBall factory-torqued into place. The ball mount provides a 2 in. rise and fits most Class 3, Class 4, and Class 5 receiver hitches. The ball mount also has a welded tab to attach the included trailer sway control unit, adding even more safety on the road. Finally, to complete these travel trailer hitch kits, they come with the Echo mobile brake controller. This unique brake controller is a first-of-its-kind Bluetooth brake controller that syncs with your Apple or Android phone and uses an intuitive app to operate the trailer brakes. Echo plugs into your vehicle's 7-way RV blade connection and features a powerful triple-axis accelerometer for smooth, effective braking. Notes: * Loaded ball mount with RockerBall cushion hitch ball and welded sway tab * RockerBall dampens jerking and jarring for smoother towing * Echo brake controller uses Bluetooth and smartphone to control trailer brakes * Echo easily plugs into 7-way RV blade connection for zero-tool setup * Sway control unit helps limit lateral trailer movement to reduce sway * Anti-rattle helps stop vibration and shank movement * Ball mount fits 2 in. x 2 in. receiver tube openings and 2 5/16 in. trailer couplers * Tested for safety to meet SAE J684 specifications * Includes 2 5/16 in. RockerBall, sway tab ball mount, Echo brake controller, sway control kit, and anti-rattle
Not Yet Reviewed
$491.95
Memphis Audio SMC3 Media Centers are capable of controlling every aspect of your audio system. Their brilliant full-color TFT wet bonded LCD display features auto-dimming and day and night modes, making it easy to view at any time of day. These units also have a video input which is excellent for backup and trail cameras. The SMC3's are equipped with Bluetooth, AM, FM, USB and AUX sources, giving you all the playback options needed for an awesome audio system. The Media Centers are IP66 rated for water resistance and are engineered to go virtually anywhere—ideal for boats and side-by-sides. Build the ultimate audio system with the four pairs of RCA pre-outs (front, rear, subwoofer, zone 2) and be the envy of the lakes or the trails with a Memphis SMC3 full-color media center. Additional details: * Multi-zone with independent sub control * 4 pair RCA pre-outputs: Front/Rear/Sub/Zone 2 * 3 in. TFT wet bonded color LCD display * Video input * Built in 4 x 50 watt amplifier * EEPROM memory * IP66 waterproof design * 18 FM presets/ 12 AM presets * Auto-dimmer with day/night mode * Optional wired remote (MXA1MCR) * AM/FM, USB, Bluetooth, and AUX inputs
Not Yet Reviewed
$349.95
Manufacturer Rebate
AutoMeter GPS speedometer interface modules can turn any electronic speedometer into a GPS speedometer with just the push of a button. They offer plug-and-play functionality with any AutoMeter programmable electronic speedometer and simple on-button, 10-second calibration for nearly every other electronic speedometer on the market. They feature IP67 construction and are fully sealed against water and dust. They include a fully sealed and paintable magnetic micro antenna and a lightning-fast 10 Hz sampling rate.
( 47 )
$258.99
If you are running an aftermarket pump that is mounted external of the fuel tank, you will need to install a draw straw or drill your fuel tank to accommodate a sump. Each of these has some significant drawbacks including the 1/4 tank issues that result in cavitation of the pump when you draw air into the fuel system. To resolve this issue there are Fleece Performance SureFlo performance sending units. SureFlo units are designed to work with aftermarket lift pumps and fit directly into your stock sending unit location. Each one features factory-style quick disconnects to adapt your stock fuel lines at the tank, giving you the cleanest installation available, and requiring no cutting or drilling of the tank. SureFlo works by drawing fuel from, and returning fuel to, the bucket assembly at the base of the unit, ensuring you are always drawing fuel into your pump and not drawing air into the fuel system, as well as eliminating the dreaded 1/4 tank problems. The SureFlo bucket also incorporates one-way check valves to allow fuel to easily flow in at lower levels. Fleece Performance SureFlo performance sending units are a great alternative for trucks originally equipped without an in-tank pump needing to repair a malfunctioning level sender or if you are simply looking to run your own custom fuel lines directly to the tank. Choose the SureFlo unit designed for your Cummins or Duramax fuel system. Features: * New fuel level electronics and fuel float * Heavy-duty billet aluminum cap * Universal -8 AN ports for professionally plumbing a custom fuel setup * New O-ring or flange seal * Adaptation pigtail connector (where applicable)
( 5 )
$359.00
—
$379.00
On Sale
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 13 )
$259.95
—
$368.95
ATL capacitance-type micro controller fuel level sending units can be installed on most fuel cells and are available in 2- and 3-terminal units. Compatible with race gas, diesel and E10 fuels only, these capacitive-style senders/probes are self-calibrating, can be cut to length, 12 V, negative ground, and have a standard SAE 5-bolt pattern. Choose the proper length and ohm range for your fueling system. Notes: * 2-terminal senders—use if electric power comes from gauge * 3-terminal senders—use if electric power comes from ignition switch
Not Yet Reviewed
$323.99
FAST offers optional sending units for use with your XFI, XFI 2.0 or XFI Sporstman fuel injection system. Choose from fuel and oil pressure units or single-pressure units with harnesses available to work with different pounds per square inch of pressure. Add options to your XFI engine management system with FAST sending units.
( 3 )
$410.95
S&B Filters fuel sending units help eliminate low fuel level issues with your Powerstroke engine. Aftermarket lift pumps provide more fuel to your diesel engine but face issues at a 1/4 tank fuel level. S&B sending units allow you to drive to empty with your pump, using a Venturi jet pump powered by your aftermarket external lift pump to keep the reservoir full, even with extremely low fuel levels in the tank. They are completely plug-and-play, with no need to modify your OEM tank or sending unit, so you can keep them intact and completely stock. S&B Filters fuel sending units have been tested in a wide range of low fuel level scenarios and is made out of OEM materials that are designed to withstand an aggressive fuel environment. Options are available for Ford Crew cab short bed or long bed applications. *For use with aftermarket lift pumps only. Works with any fuel tank, OE, or aftermarket.
Not Yet Reviewed
$299.00
CA offers rear compartment units for a variety of applications, including many Chevy Corvette models from the 1960s, '70s, and '80s. These are reproduction interior parts that fit into the rear storage area. They're complete, pre-assembled units that often include the carpeting and frames—and are designed to be a direct replacement for the original factory component, simplifying restoration projects. The units are available for specific model years and configurations, such as 2-door or 3-door, as well as in nearly a dozen original factory colors. Prior to "drop-in" installation, simply transfer existing hardware, like locks and handles, before bolting the unit into place. Order the model recommended for fitment in your vehicle.
Not Yet Reviewed
$339.99
—
$394.99
Delphi fuel tank sending units provide correct gas gauge readings. These sending units feature empty float height and float retention to exact OE specifications. Delphi builds them with internal springs for increased durability and enhanced stability to prevent tube chafing, and gold-filled fuel level sensors that provide improved resistance to sulfur corrosion and heat. Plus, their lower amperage draws less load on your vehicle's electrical system. With their more than 50 years of OE experience in fuel handling systems, shouldn't you trust your vehicle to the accuracy of Delphi fuel tank sending units?
( 1 )
$262.99
—
$508.99
Sierra Marine drive unit caps are made to outperform the original equipment part(s) they are replace. Each Sierra product is engineered to withstand the harsh marine environment while meeting today's high horsepower engine specifications. Order the drive unit component designed for your application.
Not Yet Reviewed
$253.99
Shock travel sensors are linear potentiometers that record the slightest amount of suspension movement. Monitoring the extension and compression of the shock absorbers aids greatly in understanding what the chassis is doing. It is a principal means of evaluating suspension movement and chassis setup. Regardless of your type of racing, Racepak shock travel sensors provide information that is frequently crucial to separating winners from the also-rans. They are usually connected through an analog port of a data recorder (sold separately) and monitored at high sample rates. An analog channel is required for each sensor; a separate sensor is required for each wheel monitored.
Not Yet Reviewed
$479.95
—
$519.95
On Sale
Help your fuel injection system keep up on measured pressures with these Holley replacement pressure transducers. They include a wiring pigtail, are available for all Holley EFI fuel injection systems, and come in different pressure ranges to suit your engine application requirements.
( 48 )
$299.95
—
$499.95
Clearance
Sierra Marine offers a wide range of watercraft drive unit replacement parts, including U-joint assemblies for various GLM, Mallory, OMC, Volvo Penta, and Mercruiser stern drive applications. Each component is manufactured with factory materials in accordance with OE specifications to ensure proper fitment and long-lasting performance.
Not Yet Reviewed
$578.99
$308.50
—
$401.99
Sierra Marine trim pumps are made to meet or exceed the original equipment part that they replace. These marine drive unit components are engineered to surpass today's high horsepower engine demands and stand up to the harsh marine environment. Sierra Marine has been one of the most trusted names in the marine industry and has proudly been offering high-quality engine and drive parts to keep your boat on the water and running strong. Order the model recommended for your application needs.
Not Yet Reviewed
$362.99
Sierra Marine shafts meet or exceed the original equipment part it replaces. These marine drive unit components are available for use in Mercruiser Alpha, Gen II, Bravo I/II/III and Vazer engine applications. Includes one upper swivel gimbal ring shaft. Order the model for your application needs.
Not Yet Reviewed
$320.99
On Sale
AEM Electronics EGT thermocouples are economical and fast responding K-type thermocouples. They include a closed-tip TC sensor with a protective inconel sheath, 10 ft. extension wire, 1/8 in. NPT compression fitting, and ring and terminal harness. AEM EGT thermocouples are available individually or in 2- or 4-packs. Specs: * Maximum temperature: 1800 degrees F (982.2 degrees C) * Sheath length: 3 in./76.2mm * Sheath diameter: 0.125 in./3.18mm * Termination: Ring terminals * Wire length: 12 in. * Accuracy: Greater of 3.96 degrees F/2.2 degrees C or 0.75 percent
Not Yet Reviewed
$420.95
$377.95
Manufacturer Rebate
These pressure sensors by Stack Gauges feature a 150 psi analog fluid pressure sensor and have male push-on spade terminals. Stack is a leading supplier of dashboard instruments to motorsports and automotive customers worldwide. Go with a pressure sensor made by a name you can depend on. Go with Stack Gauges.
Not Yet Reviewed
$252.99
—
$264.99
Sierra Marine offers prop shafts developed for use with OMC and Johnson/Evinrude engines. They have a lot of great features, including exceptional performance quality, durability, and high reliability. Sierra's propeller shafts are made with the industry's best-grade materials and are finished with a minimal quality of leftover tensions, and they are corrosion-resistant. All Sierra products are equal to or better than the original equipment parts that they are meant to replace. For more than 50 years, Sierra has been unmatched in quality and backed by rigorous engineering, testing, and manufacturing standards to produce the best parts in the marine industry. Sierra Marine's commitment to excellence ensures the highest degree of confidence where it counts the most: out on the water. Order the prop shaft designed for your application needs.
Not Yet Reviewed
$359.99
—
$379.99
Sierra Marine offers kits to help you rebuild your gear box. Each kit contains the gears you need to get your boat back on the water. Order the model recommended for your watercraft engine application.
Not Yet Reviewed
$288.99
—
$480.99
Sierra is a leading supplier of marine engine and drive parts, offering 1,000's of parts including driveshafts. These quality components are designed to meet or exceed the OE part(s) they replace. For 50 years, Sierra Marine has proudly offered high-quality engine and drive parts as a trusted name in the marine industry. All Sierra Marine products are engineered to meet today's high horsepower engine demands, while withstanding the harsh marine environment. Choose the driveshaft designed for your application needs.
Not Yet Reviewed
$489.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
